stellar labs Slimline SK81/E-15 User manual

Instruction Manual
Model No: SK81 / E-15
Slimline
Digital
Scale
Replace Battery
When “ ” blinks on the display, the battery
must be replaced. The scale requires 2 AAA (1.5V)
batteries. The battery compartment is located on
the underside of the scale. To replace the batteries,
you have to open the compartment cover and
remove the used batteries. Before you replace the
new batteries into the compartment, please make
sure they are installed to the correct polarity (+) /
(-).
Environmental Note: used batteries should be
disposed-of at your recycling collection point.
Maintenance
DO NOTs
Do not immerse the scale in water
Do not operate the scale with wet hands
Do not put the scale into the dishwasher
Do not put items exceeding 5kg onto the scale
as this could damage the scale
Do not place items on the display part as this
could damage the LCD display
Do not try to open the scale by force
DOs
Always clean the scale with soft damp cloth only
Always keep out the scale from fire, direct
sunlight or acidic substances
Always store the scale in dry condition
Always replace new batteries at the same time
to maximize the battery life
•
•
•
•
•
•
•
•
•
•
WARRANTY
The STELLAR warranty covers the product
to be free of defects in materials and
workmanship for a period of ONE YEAR from
the date of original retail purchase. During
this period, STELLAR will, at our option, repair
or replace defective parts of the product, or
replace the product, providing the Use Care &
Safety Instructions have been followed. The
warranty does not cover damage, defect or
failure caused by or resulting from accidents,
external damage, alteration, modification,
abuse, misuse or misapplication. The warranty
does not cover any damage caused by taking
the scale apart yourself, or attempting to repair
the scale yourself. Please keep your purchase
receipt and contact us directly if you encounter
any problems with your product. which is
intended for domestic use only.
STELLAR CUSTOMER SERVICES
HORWOOD
AVONMOUTH WAY
BRISTOL
BS11 9HX
[email protected]
www.horwood.co.uk
HORWOOD SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF
THIS PRODUCT WITHOUT FOLLOWING THE
USE, CARE & SAFETY INSTRUCTIONS.
Errors and Omissions Excepted.
AAA 1.5V AAA 1.5V
100mm 100mm97mm

Quick Guide
Remove the scale from the packaging.
Place the scale on flat and firm surface
Press the ON/OFF button to switch on the scale.
When ‘0’ appears on the display, the scale is ready
for use.
1.
2.
3.
4.
LCD Display
On/Off Button
Hold Button
KG/LB Button
Tare Button
1.
2.
3.
4.
5.
Slimline
Digital
Scale
Blue LED Lights
When the scale is switched on, the blue LED lights
will illuminate. However, the lights will be switched off
automatically after the weight reading is steady for 15
seconds.
System Button
The system button allows you to choose Metric
(kg/g) or Imperial (lb/oz) as your preferred system of
measurement. However, you may switch between the two
systems at any time without resetting the scale to zero.
Tare Function (Add-Weigh)
The scale allows you to weigh each additional item as it
is added to the scale. After weighing the first item on the
scale and with the item remaining on the scale, press the
TARE button to reset the scale to zero. You may then add
the second item on the scale and it will show the weight of
the second item only. You may repeat the same steps for
weighing consecutive items.
12 3
54
Hold Function
Hold function allows you to hold the weight reading
on the display. Once you press the HOLD Button,
the weight reading is ‘on-hold’. To ‘unhold’, press
the HOLD Button again. Note: During the ‘on-hold’
period, you are able to press TARE Button to reset to
zero but the weight reading will remain at zero until
you ‘unhold’ the scale.
Weighing
Place the scale on flat and firm surface - this is
essential for correct measurement. Press ON/OFF
button to switch on the scale. As soon as ‘0’ appears,
the scale is ready for use. If you put your own bowl
on the scale before switching it on, the weight of the
bowl has been included and the display will show
‘0’. You may then put your items onto the bowl for
direct weight reading. When the scale is in use and
you want to use your own bowl for weighing, you
can simply place the bowl on the scale and press the
TARE button to reset to zero. The maximum weighing
capacity of the scale is 5kg. The display will show ‘Err’
when the scale is overloaded.
Auto-Off Function
You may switch off the scale at any time by pressing
the On/Off button. In order to prolong the battery
life, the scale will be switched off automatically when
the weight reading is steady for about 180 seconds.
OFF ON
100mm 100mm 97mm