Sterling Plumbing 71224106 User manual

Features
•Compression molded from Sterling’s exclusive solid
Vikrell
®
material
•Modular 3-piece design
•Tongue-and-groove ″snap together″design
•Durable high gloss finish
•10 year consumer/3 year commercial limited warranty
•Allows for future attachment of grab bars
•Curved design
•Wall surround allows for attachment of grab bars
•Integrated shelving on back wall
•60″(152.4 cm) x 32″(81.3 cm) bath/shower or
whirlpool bath available separately
•60″(152.4 cm) x 33-1/4″(84.5 cm) x 55-1/4″(140.3
cm) complete unit rough-in dimensions include flange
•60″(152.4 cm) x 32″(81.3 cm) x 54″(137.2 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ANSI Z124.1.2
•IAPMO/UPC
•CSA B45
32″(81.3 cm) BATH/SHOWER
SURROUND WITH BACKER BOARDS
71224106
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Wall Component Description Colors/Finishes
71224106 32″(81.3 cm) complete wall set with backers ❑0❑Other_____
Model Complete Unit Description Colors/Finishes
71220116 Bath and complete wall set with backers, left hand drain ❑0❑Other_____
71220126 Bath and complete wall set with backers, right hand drain ❑0❑Other_____
71220118 Bath and complete wall set with backers, left hand AFD ❑0❑Other_____
71220128 Bath and complete wall set with backers, right hand AFD ❑0❑Other_____
ENSEMBLETM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1063920-4-A

Technical Information
Model Door maximum
width
Door maximum
height
72130106 57-11/16″(146.5 cm) 55-1/2″(141 cm)
Installation Notes
Install this product according to the installation guide.
End stud positioning is critical if nailing-in flanges are to be
used.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
42"
(106.7 cm)
Grab Bar
18"
(45.7 cm)
Grab Bar
Backer board locations
Note: Right and left end walls are
the same, only mirrored.
46" (116.8 cm)
22"
(55.9 cm)
3-1/2" (8.9 cm) 3-1/2" (8.9 cm)
13" (33 cm)
2-1/2" (6.4 cm)
1" (2.5 cm)
1" (2.5 cm)
3-1/2" (8.9 cm)
22-1/2"
(57.2 cm)
4"
(10.2 cm)
30" (76.2 cm)
33-1/4"
(84.5 cm)
15-1/2"
(39.4 cm)
8-1/2"
(21.6 cm)
8-1/2"
(21.6 cm)
16" (40.6 cm)
2" (5.1 cm) D. Drain
6" (15.2 cm)
(Typical)
14"
(35.6 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
8"
(20.3 cm)
Recommended Support Clip or
Roofing Nail Location (5 Total)
2" (5.1 cm)
1-1/4" (3.2 cm)
33-1/4"
(84.5 cm)
60"
(152.4 cm)
54"
(137.2 cm)
21"
(53.3 cm)
18"
(45.7 cm)
20" (50.8 cm)
75-1/4"
(191.1 cm)
Back Wall End Wall
42"
(106.7 cm)
Grab Bar
Product Diagram
ENSEMBLETM
ENSEMBLETM 32″(81.3 cm) BATH/SHOWER SURROUND WITH BACKER BOARDS
Page2of2
1063920-4-A