Sterling Plumbing ENSEMBLE 72120106 User manual

Features
•Compression molded from Sterling’s exclusive solid
Vikrell
®
material
•Modular 4-piece design
•Lightly pebbled bottom surface for sure footing
•Tongue-and-groove ″snap together″design
•Durable high gloss finish
•10 year consumer/3 year commercial limited warranty
•Convenient shelves provide generous storage
•Shaving ledge and foot rest added for comfort
•Tile design
•Wall surround allows for attachment of grab bars
•48″(121.9 cm) x 35-1/4″(89.5 cm) x 77″(195.6 cm)
complete unit rough-in dimensions include flange
•48″(121.9 cm) x 34″(86.4 cm) x 75-3/4″(192.4 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ANSI Z124.1.2
•IAPMO/UPC
•CSA B45
•ASTM F462 Slip Resistance
48″(121.9 cm) SHOWER SYSTEM
WITH BACKER BOARDS
72120106
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72120106 48″(121.9 cm) shower receptor and wall surround with backer boards, center drain ❑0❑Other_____
Model Wall Component Description Colors/Finishes
72122106 Back wall with backer boards ❑0❑Other_____
72105106 End walls with backer boards ❑0❑Other_____
ENSEMBLETM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1065812-4-A

Technical Information
Model Door maximum
width
Door maximum
height
72120106 44-5/8″(113.3 cm) 70-1/2″(179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
Note: Right and left end walls are the same, only mirrored.
Backer board locations
1"
(2.5 cm)
1"
(2.5 cm)
10"
(25.4 cm)
3.5" (8.9 cm)
10" (25.4 cm)
2" (5.1 cm)
2" (5.1 cm)
2"
(5.1 cm)
2" (5.1 cm)
Front Wall End Wall
16" (40.6 cm)
48" (121.9 cm) Min
48-1/8" (122.2 cm) Max
35-1/4"
(89.5 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
24"
(61 cm)
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm)
Max OD
Drain Hole
4-1/2" (11.4 cm) D.
Drain Cutout
Recommended Roofing
Nail Locations (4 total)
1-5/8" (4.1 cm)
at Midpoint 35-1/4"
(89.5 cm)
48"
(121.9 cm)
1-1/4"
(3.2 cm)
72-1/2"
(184.2 cm)
5-1/2"
(14 cm)
77"
(195.6 cm)
4-1/2"
(11.4 cm)
18" (45.7 cm) Grab Bar
18" (30.5 cm)
or 24" (61 cm)
Grab Bar
12"
(30.5 cm)
Grab Bar
Product Diagram
ENSEMBLETM
ENSEMBLETM 48″(121.9 cm) SHOWER SYSTEM WITH BACKER BOARDS
Page2of2
1065812-4-A