Sterling Plumbing 72230106 User manual

Features
•Compression molded from Sterling’s exclusive solid
Vikrell
®
material
•Modular 4-piece design
•Lightly pebbled bottom surface for sure footing
•Tongue-and-groove ″snap together″design
•Durable high gloss finish
•10 year consumer/3 year commercial limited warranty
•Convenient shelves provide generous storage
•Shaving ledge and foot rest added for comfort
•Wall surround allows for attachment of grab bars
•60″(152.4 cm) x 35-1/4″(89.5 cm) x 77″(195.6 cm)
complete unit rough-in dimensions include nailing
flange
•60″(152.4 cm) x 34″(86.4 cm) x 75-3/4″(192.4 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ANSI Z124.1.2
•IAPMO/UPC
•CSA B45
•ASTM F462 Slip Resistance
60″(152.4 cm) SHOWER RECEPTOR
AND WALL SURROUND WITH
BACKER BOARDS
72230106
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72230106 60″(152.4 cm) shower receptor and curve wall surrounds with backer boards ❑0❑Other_____
Model Wall Component Description Colors/Finishes
72232106 Back wall with backer boards ❑0❑Other_____
72235106 End wall with backer boards ❑0❑Other_____
ENSEMBLETM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1064361-4-A

Technical Information
Model Door maximum
width
Door maximum
height
72230106 56-5/8″(143.8 cm) 70-1/2″(179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
Attach grab bars at the specified backer board locations only.
42"
(106.7 cm)
Grab Bar
1-3/8" (3.5 cm)
at Midpoint
35-1/4"
(89.5 cm)
72-1/2"
(184.2 cm)
1-1/4"
(3.2 cm)
77"
(195.6 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
35-1/4"
(89.5 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
16"
(40.6 cm)
21"
(53.3 cm)
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm) OD
Drain Hole
4-1/2"
(11.4 cm) D.
Drain Cutout
Recommended Roofing
Nail Locations (4 total)
14"
(35.6 cm)
1"
(2.5 cm)
46"
(116.8 cm)
22" (55.9 cm)
2" (5.1 cm)
3"
(7.6 cm)
Note: Right and left end walls are the same, only mirrored.
60"
(152.4 cm)
42" (106.7 cm) Min
42-1/8" (107 cm) Max
13"
(33 cm)
13"
(33 cm)
1"
(2.5 cm)
Backer board locations
3"
(7.6 cm)
End WallBack Wall
3-1/2" (55.9 cm)
18" (45.7 cm) Grab Bar
42" (106.7 cm) Grab Bar
Product Diagram
ENSEMBLETM
ENSEMBLETM 60″(152.4 cm) SHOWER RECEPTOR AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1064361-4-A