Sterling Plumbing 61040116 User manual

Features
•Compression molded from our exclusive solid Vikrell
®
material
•Convenient shelving and acrylic towel bar on back
wall
•Modular 4-piece design
•Tongue-and-groove 4-piece modular design allows for
easy ″snap together″installation
•Durable swirl-gloss finish
•10-year consumer/3-year commercial limited warranty
•Caulk required for installation
•Allows for future attachment of grab bars
•60″(1524 mm) x 31-1/2″(800 mm) x 74″(1880 mm)
complete unit rough-in dimensions include flange
•60″(1524 mm) x 30″(762 mm) x 72-3/4″(1848 mm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ANSI Z124.1.2
•CSA B45
•HUD, UM Bulletin 73A
•NAHB Research Foundation, Inc.
60″(1524 mm) BATH/SHOWER
SYSTEM WITH BACKER BOARDS
61040116
ALSO 61040126, 61040516, 61040526
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
61040116 60″(1524 mm) bath and wall surround with backer boards, left drain ❑0❑Other_____
61040126 60″(1524 mm) bath and wall surround with backer boards, right drain ❑0❑Other_____
Model Wall Component Description Colors/Finishes
61044106 Complete wall set with backer boards ❑0❑Other_____
ALL PRO
®
Page 1 of 2
1065811-4-B
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING

Technical Information
Fixture:*
Bathing
well
Basin area,
bottom
40″(1016 mm) x 21″(533 mm)
Basin area,
top
52″(1321 mm) x 29″(737 mm)
To
overflow
Water depth 9-3/8″(238 mm)
Capacity 44 gal (166.6 L)
* Approximate measurements for comparison only.
Door width 57-1/2″(1461 mm)
Door maximum height 57-3/4″(1467 mm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
45"
(1143 mm)
21"
(533 mm)
2" (51 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
10"
(254 mm)
10"
(254 mm)
Dimensions are taken
from the center of the
grout lines.
2-7/8" (73 mm)
3-1/2" (89 mm)
30" (762 mm)
1-5/8"
(41 mm)
1-1/4"
(32 mm)
8"
(203 mm)
14"
(356 mm)
14"
(356 mm)
3-1/2"
(89 mm)
31-1/2"
(800 mm)
60" (1524 mm) Min
60-1/8" (1527 mm) Max
74"
(1880 mm)
60"
(1524 mm)
31-1/2"
(800 mm)
59"
(1499 mm)
39"
(991 mm)
2-5/8"
(67 mm)
End Wall
Back Wall
18"
(457 mm)
Grab Bar
42"
(1067 mm)
Grab Bar
2-1/2"
(64 mm)
42"
(1067 mm)
Grab Bar
Note: Right and left
end walls are the
same, only mirrored.
Backer board
locations
4" (102 mm)
16"
(406 mm)
30"
(762 mm)
Drain Cutout
22" (559 mm)
6-1/2"
(165 mm)
Ø 2"
(51 mm)
Drain 7-3/4"
(197 mm)
3-1/2"
(89 mm)
1-1/2"
(38 mm)
15-1/2" (394 mm)
15" (381 mm)
1" (25 mm)
Product Diagram
ALL PRO
®
ALL PRO
®
60″(1524 mm) BATH/SHOWER SYSTEM WITH BACKER BOARDS
Page2of2
1065811-4-B