stex S25T User manual

S25 T Treadmill
Customer Support Services
Service manual

< 2 >
General
General
General
General Contents
Contents
Contents
Contents
1. Introduction
2. Component identification
3. Parts manual
4. Assembly instructions
Sectional
Sectional
Sectional
Sectional Contents
Contents
Contents
Contents

< 3 >
1.
1.
1.
1. Introduction
Introduction
Introduction
Introduction
Please check following special note before installation
1.
1.
1.
1. Assembly
Assembly
Assembly
Assembly introduction
introduction
introduction
introduction
Important safety installation of the STEX treadmills.
�Please confirm the horizontal floor.
Position the treadmill on a clear, level surface. Otherwise Not only Vibration will be occurred but also
User would
be wounded.
We strongly recommended laying a mat under the treadmill to prevent damage against the shock of vibr
ation
�DO
DO
DO
DO NOT
NOT
NOT
NOT locate the treadmill in areas with a high humidity and a lot of dust.
�
DO
DO
DO
DO NOT
NOT
NOT
NOT locate any inflammable liquid of material near the treadmill .
�Locate the treadmill with the enough intervals to operate easily and safely.
- Minimum space : Rear 1.2m, Left & Right 0.6m
2.
2.
2.
2. How
How
How
How to
to
to
to carry
carry
carry
carry the
the
the
the STEX
STEX
STEX
STEX Treadmill
Treadmill
Treadmill
Treadmill
To carry the STEX Treadmill
�Lift the rear of the treadmill for the easy movement.
3.
3.
3.
3. Parts
Parts
Parts
Parts included
included
included
included
�Operation Manual, Warranty Card
�
10mm T-Wrench, 6mm T-Wrench, 6mm L-Wrench
�Hexagon socket head(M8
×
20mm-SEMS)
×
14ea(Silver)
Hexagon socket head(M8 ×50mm-SEMS) ×4ea(Black)
�Main Frame
Display Console Assembly
Display Top Assembly
Display Support 1set
4.
4.
4.
4. If
If
If
If you
you
you
you have
have
have
have any
any
any
any problem
problem
problem
problem
If you have any problem for STEX treadmill S25T series, Please contact our sales dealer or our service ce
nter by

< 4 >
phone of E-mail. In order to reply promptly as for your particular issue situation, Please refer to the sampl
e of Claim
Report in the last page. It would be appreciated if you fill out the form like the sample. Then we will pro
ceed your
claim quickly.
3.
3.
3.
3. Part
Part
Part
Part manual
manual
manual
manual
3-1 Total assembly - S25T, S25TX
3-1 Description
No Parts
Parts No.
Q ’ TY Remark
S25T S25TX
1 Master main frame
21MF-TSN01 21MF-TSX01
1 ea
2 Master display
21DC-TSN01 21DC-TSX01
1 ea

< 5 >
3 Display support(LH/RH) 32M4-AL313/23 1 set
4 Hexagon socket head 33W1-1N820 14 ea M8 x 20 L (SEMS)
3-2 Assembly Main Frame (#1)
3-2 Description
No Parts
Parts No.
Q ’ TY Remark
S25T S25TX
1 1 ’ st main frame assembly
21MF-TSA0 1 21MF-TSC01
1 ea
2 Front motor cover 32M3-TS011 1 ea
3 Top motor cover 32M3-TS021 1 ea
4 Side motor cover-LH(RH) 32M3-TS031(41) 1 set
5 Safety guide 32M3-TS061 1 ea
6 Back cap 32M3-TS051 1 set
7 Side platform 32M4-AL101 2 ea
8 Frame side cover_LH(RH) 32M4-AL212/22 1 set
9 Non slip pad 32M3-RS201 2 ea
10 Platform fixer plate 02 32M1-TSE21 8 ea

< 6 >
11 Hexagon socket head 33W1-1B820 16 ea M8 x 20 L (SEMS),
⑧
,
⑩
12 Hexagon socket head 33W1-1B820 4 ea M8 x 20 L (SEMS), ②,⑥
13 Tapping truss head 33U6-6Z512 4 ea Φ 5 x 12 L , ④
14 Machine pan head 33T6-1B512 4 ea M5 x 12 L , ③
3-3-1 Assembly Main Frame (#2) – S25T

< 7 >
3-3-1 Description
No Parts
Parts No. Q ’ TY Remark
1 2 ’ nd main frame assembly 21MF-TSB01 1 ea
2 Incline motor 33S1-IS021 1 ea
3 Incline front fix shaft 32M2-T80W1 1 ea
4 Split pin 33N5-P0540 1 ea
5 Incline bushing 32M2-TS401 1 ea
6 Hexagon head 33T1-4BA45 1 ea M10 x 45 L
7 Lock nut 33N1-L1000 1 ea M10
8 Deck 32M2-TS501 1 ea
9 Running belt 32N3-RS101 1 ea
10 Guide finger(LH/RH) 32M1-TSN11/21 1 set
11 Deck washer 32M2-T8031 4 ea
12 Socket flat head 33W3-2B830 4 ea M8 x 30 L
13 Rear roller assembly 21RR-TW001 1 ea
14 Front roller assembly 21FR-TW001 1 ea
15 V-belt 33N3-V0300 1 ea
16 Hexagon socket head 33W1-1B835 2 ea M8 x 35 L (SEMS)
17 Hexagon socket head 33W1-2BBC0 2 ea M12 x 120 L
18 Washer-split lock 33N1-P1200 2 ea Φ 12
19 Washer-flat 33N1-F1200 2 ea Φ 12
20 Driving motor assembly 21DM-TW003 1 ea
21 Motor insulation bush 32M2-TS601 4 ea
22 Hexagon socket head 33W1-1B820 4 ea M8 x 20 L (SEMS)
23 Motor limit bush 32M2-TS701 2 ea
24 Auto tensioner assembly 21AT-TSO01 1 ea
25 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
26 Inverter-TM5(G100) 33S2-IS201 1 ea
27 Noise filter 33S2-F0002 1 ea
28 Breaking resister 33S2-R0002 1 ea
29 Machine pan head 33T6-1B512 8 ea

< 8 >
30 Front terminal assembly 21FT-TSP01 1 ea
31 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
32 Partition assembly 21PA-TSQ01 1 ea
33 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
3-3-2 Assembly Main Frame (#2) – S25TX

< 9 >
3-3-2 Description
No Parts
Parts No. Q ’ TY Remark
1 2 ’ nd main frame assembly 21MF-TSB01 1 ea
2 Incline motor 33S1-IS021 1 ea
3 Incline front fix shaft 32M2-T80W1 1 ea
4 Split pin 33N5-P0540 1 ea
5 Incline bushing 32M2-TS401 1 ea
6 Hexagon head 33T1-4BA45 1 ea M10 x 45 L
7 Lock nut 33N1-L1000 1 ea M10
8 Deck 32M2-TS501 1 ea
9 Running belt 32N3-RS101 1 ea
10 Guide finger(LH/RH) 32M1-TSN11/21 1 set
11 Deck washer 32M2-T8031 4 ea
12 Socket flat head 33W3-2B830 4 ea M8 x 30 L
13 Rear roller assembly 21RR-TW001 1 ea
14 Front roller assembly 21FR-TW001 1 ea
15 V-belt 33N3-V0300 1 ea
16 Hexagon socket head 33W1-1B835 2 ea M8 x 35 L (SEMS)
17 Hexagon socket head 33W1-2BBC0 2 ea M12 x 120 L
18 Washer-split lock 33N1-P1200 2 ea Φ 12
19 Washer-flat 33N1-F1200 2 ea Φ 12
20 Driving motor assembly 21DM-TW003 1 ea
21 Motor insulation bush 32M2-TS601 4 ea
22 Hexagon socket head 33W1-1B820 4 ea M8 x 20 L (SEMS)
23 Motor limit bush 32M2-TS701 2 ea
24 Auto tensioner assembly 21AT-TSO01 1 ea
25 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
26 Inverter-TM5(G100) 33S2-IS201 1 ea
27 Noise filter 33S2-F0002 1 ea
28 Breaking resister 33S2-R0002 1 ea
29 Machine pan head 33T6-1B512 8 ea
30 Front terminal assembly 21FT-TSP01 1 ea
31 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)

< 10 >
32 Partition assembly 21PA-TSQ01 1 ea
33 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
34 Adapter bracket 33M1-TSR01 1 ea
35 Adapter fix bracket 32M1-TWT11 1 ea
36 Adapter 3B802P005 1 ea
3-4 Assembly Auto Tensioner (#3)
3-4 Description
No Parts
Parts No. Q ’ TY Remark
1 Tensioner bracket 01 32M1-TS011 1 ea
2 Tensioner bracket 02 32M1-T8182 1 ea
3 Tensioner bracket 03 32M1-T8171 1 ea
4 Tensioner hinge shaft 32M2-T80K1 1 ea
5 Tensioner hinge bushing 32M2-T80L1 2 ea
6 Hexagon socket head 33W1-1B855 1 ea M8 x 5 5 L (SEMS)
7 Nut-nylon insert lock 33N1-L0800 1 ea M8
8 Tensioner roller shaft 32M2-TS801 2 ea Φ 12
9 Tensioner roller 32M2-TS901 1 ea

< 11 >
10 Snap ring - C type 33N1-H4200 1 ea Φ 42
11 Ball bearing 33N2-Z6004 2 ea #6004ZZ
12 Hexagon socket head 33W1-1B855 1 ea M8 x 5 5 L (SEMS)
13 Nut-nylon insert lock 33N1-L0800 1 ea M8
14 Tensioner spring 32M2-T80T1 1 ea
15 Hexagon socket head 33W1-1B815 2 ea M8 x 1 5 L (SEMS)
3-5 Assembly Rear Roller (#4)
3-5 Description
No Parts
Parts No. Q ’ TY Remark
1 Rear roller pipe 32M2-TW401 1 ea
2 Rear roller shaft 32M2-TW701 1 ea
3 Ball bearing 33N2-D6305 2 ea #6305DD
4 Snap ring - C type 33N1-S2500 2 ea Φ 25
5 Snap ring - C type 33N1-R6200 2 ea Φ 62

< 12 >
3-6 Assembly Front Roller (#5)
3-6 Description
No Parts
Parts No. Q ’ TY Remark
1 Front roller pipe 32M2-TW801 1 ea
2 Front roller shaft 32M2-TWB01 1 ea
3 Ball bearing 33N2-D6305 2 ea #6305DD
4 Snap ring - C type 33N1-S2500 2 ea Φ 25
5 Snap ring - C type 33N1-R6200 2 ea Φ 62

< 13 >
3-7 Assembly Partition (#6)
3-7 Description
No Parts
Parts No. Q ’ TY Remark
1 Partition plate 32M1-TSQ11 1 ea
2 Antistatic 32M2-T80P1 1 ea
3 Machine pan head 33T6-1B510 3 ea M5x10L(SEMS)

< 14 >
3-8 Assembly Main Frame (#7)
3-8 Description
No Parts
Parts No. Q ’ TY Remark
1 Main frame assembly 32M1-TS005 1 ea
2 Incline leg assembly 32M1-TSL03 1 ea
3 Front wheel for S25T 33N5-M0160 2 ea
4 Hexagon socket head 33W1-1B815 2 ea M8 x 15 L (SEMS)
5 Oil less bearing for S25T 32N2-O2040 2 ea
6 Leg washer 32M1-T80V1 2 ea
7 Bearing shaft for S25T 32M2-TSL20 2 ea
8 Washer-split lock 33N1-P1200 2 ea Φ 12

< 15 >
9 Hexagon socket head 33W1-4BB70 2 ea M12 x 70 L (CM)
10 Leveling foot 33N5-MRS01 2 ea
11 Silicon absorber 32M3-T80D2 4 ea
12 Rubber absorber 32M3-T80C1 2 ea
13 Hexagon socket head 33W1-1B815 6 ea M8 x 15 L (SEMS)
14 Tracking bush 32M2-TS301 2 ea
3-9 Assembly Display Frame (#1)
3-9 Description
No Parts
Parts No.
Q ’ TY Remark
S25T S25TX
1 Display console assembly 21DC-TSA01 1 ea
2 Display top assembly
21DC-TSB01 21DC-TS C 01
1 ea
3 Hexagon socket head 33W1-1B850 4 ea M8 x 50 L (SEMS)

< 16 >
3-10 Assembly Display Frame (#2)
3-10 Description
No Parts
Parts No. Q ’ TY Remark
1 1 ’ st Display console assembly 21DC-TSA11 1 ea
2 Bottom case assembly 21DC-TSB11 1 ea
3 Tapping pan head 33U5-6B516 10 ea Φ 5 x 16 L
4 Machine pan head 33T6-1B512 2 ea M5 x 12 L (SEMS)

< 17 >
3-11 Assembly Display Frame (#3)
3-11 Description
No Parts
Parts No. Q ’ TY Remark
1 Display bottom case 32M3-TS141 1 ea
2 COMM board 22BD-TS15D 1 ea
3 COMM fix bracket 32M1-TSV01 1 ea Φ 5 x 16 L
4 Machine pan head 33T6-1B408 2 ea M 4 x 8L (SEMS)
5 Tapping truss head 33U6-6Z512 2 ea Φ 5 x 12L

< 18 >
3-12 Assembly Display Frame (#4)
3-12 Description
No Parts
Parts No. Q ’ TY Remark
1 Console assembly 21DC-TSA31 1 ea
2 Middle case assembly 21DC-STA41 1 ea
5 Tapping truss head 33U6-6Z512 10 ea M5 x 12 L (SEMS)

< 19 >
3-13 Assembly Display Frame (#5)
3-13 Description
No Parts
Parts No. Q ’ TY Remark
1 Display middle case 32M3-TS131 1 ea
2 Emergency switch 32M3-TS161 1 ea
3 Emergency fix bracket 32M3-TS151 1 ea
4 Micro switch 33H1-TS011 1 ea
5 Tapping truss head 33U6-6Z520 2 ea Φ 5 x 20L
6 Tapping truss head 33U6-6Z516 1 ea Φ 5 x 16 L
7 Multi board bracket 323M-TS171 1 ea
8 IPOD cable 32Q1-TS1M1 1 ea
9 Front board 22BD-TS14A 1 ea

< 20 >
10 Multi fixer plate 32M1-TSAU1 1 ea
11 Machine pan head 33T6-1B408 4 ea M 4 x 8L (SEMS)
12 Fast track board 22BD-TS13A 1 ea
13 Tapping truss head 33U6-6B410 2 ea Φ 4 x 10L
14 Membrane switch(fast track) 32P5-TS021 1 ea
15 Emergency wire 32Q1-TSEW1 1 ea
3-14 Assembly Display Frame (#6)
3-14 Description
No Parts
Parts No. Q ’ TY Remark
1 Display main frame 32M1-TS0A3 1 ea
2 Heart rate bar assembly 21HR-TS0B1 1 set
3 Hexagon socket head 33W1-1B620 8 ea M6 x 20 L (SEMS)
4 Side handle _ LH(RH) 32M3-TSAQ1(R1) 1 set
5 Interface board 22BD-TS12D 1 ea
6 Machine pan head 33T2-1B410 2 ea M4 x 10 L (SEMS)