VIRTUFIT Elite TR-1000i User manual

Elite TR-1000i Treadmill
ENG
User manual

ENG
VirtuFit Elite TR-1000i Treadmill
2
INDEX
Safety instructions 3-4
Checklist 5-6
Assembly instructions 7-11
Folding instructions 12-13
Maintenance treadmill 14-15
Problem solutions 16
Control panel 17-23
Kinomap 24
Program speed table 25-26
Training instructions 27
Exploded drawing 28
Part list 29-32

ENG
VirtuFit Elite TR-1000i Treadmill
3
SAFETY INSTRUCTIONS
WARNING: We suggest that you should consult with your health professional before
starting your workout, especially for the age up to 35 old or people
with health problems. We do not take responsiblity for any problems or injuries if you
don’t follow our instructions.
– Ensuring the safety clamps were attached to the clothing or belts before using the treadmill.
– Please do not insert any items to any part of the equipments, which would damage the equipment.
– Position the treadmill on a clear, level surface. Do not place the treadmill on thick carpet as it may
interfere with proper ventilation. Do not place the treadmill near water or outdoors.
– Never start the treadmill while you are standing on the walking belt. After turning the power on and
adjusting the speed control, there may be a pause before the walking belt begins to move, always
stand on the foot rails on the sides of the frame until the belt is moving.
– Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose tting clothing
that may be caught in the treadmill. Always wear running or aerobic shoes with rubber soles.
– Keep the children and pets away from the treadmill while starting workout.
– Don’t exercise in 40 minutes after dinner.
– The equipment is suitable for adults, children need be accompanied with adults while workout.
– You must hold on to the handrails until you become comfortable and familiar with the treadmill
when it is your rst workout.
– Treadmill is indoor-using equipment, not outdoor-using for avoiding damage. Keep the store-place
clean and at, drying. Prohibiting the other purpose using, only for workout.
– Please purchase the power-line to the distributor or contact with our company directly, for the
powerline only equip to the treadmill.
ATTENTION

ENG
VirtuFit Elite TR-1000i Treadmill
4
SAFETY INSTRUCTIONS
– The treadmill is for indoor and not outdoor use to prevent damage on the product. Keep the storage
area dry, clean and at. It is forbidden to use the device for other purposes than before training.
– Only use the power cable supplied by the supplier for the treadmill. If the cable is missing, please
contact our company.
– If the treadmill should suddenly increase in speed due to an electronics failure or the speed being
inadvertently increased, the treadmill will come to a sudden stop when the pull pin is disengaged
from the console.
– Do not connect line to the middle of cable; do not lengthen cable or change the cable plug; do not
put any heavy thing on cable or put the cable near the heat source; forbid using socket with several
holes, these may cause re or people may be hurt by the power.
– Cut o the power when the equipment is not used. When the power is cut o , do not pull the
power line to keep the wire unbroken. Insert the plug to the socket with the safety ground circuit,
for the power-line is professional equipment .You must contact with the professional people directly
while the line is damaged.
– This Treadmill only for home-using, the max user weight is 155 KGS.
– Please keep the space at least 1 X 2 meter at the end of base frame to escape any accidents!

ENG
VirtuFit Elite TR-1000i Treadmill
5
CHECKLIST
TOOL KIT
Main Frame
Display
Manual
Upright Post Frame ( L & R )
Base frame cover
Hardware bag
Safety key
Console
Console rear cover
Silicon oil

ENG
VirtuFit Elite TR-1000i Treadmill
6
CHECKLIST
TOOL KIT
Allen C.K.S half thread screw (M8*60*20 ) 4cps
Philips C.K.S. self-taping screw ( ST4*16 ) 4 pcs
Allen C.K.S full thread scw ( M8*15 ) 8pcs
Allen C.K.S half thread screw ( M8*30*20) 2pcs
Allen C.K.S full thread screw ( M8*20 ) 2pcs
T shaped wretch ( S6 ) 1 pcs
Philips C.K.S self-taping screw ( ST4*12 ) 2pcs
Cross Wrench 1pcs

ENG
VirtuFit Elite TR-1000i Treadmill
7
ASSEMBLY INSTRUCTIONS
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the treadmill. Some parts (bolts, screws, etc.) are already attached to / in the treadmill.
Socket screws: The treadmill contains socket screws, make sure that the allen key is rmly in the bolt
before you apply force to the key. In this way you prevent the head of the socket head screw from being
rotated.
– Take out the machine from box and put in on a at oor;
– Connect communication wire of the console with the right upright post. Insert the left and
right upright post on the base frame, and then x the each upright post with 2pcs M8*60*20
screw and 1pc M8*20 screw.
STEP 1

ENG
VirtuFit Elite TR-1000i Treadmill
8
– Fold up the treadmill, (Note: Before assemble the base frame cover, please ensure the screws
for base frame and upright post are xed completely);
– Put the base frame covers in the left and right side of upright post, then clip-on
the covers together;
– Last, x the covers by 1pc ST4*12 screw.
STEP 2
ASSEMBLY INSTRUCTIONS

ENG
VirtuFit Elite TR-1000i Treadmill
9
– Insert the console on the upright post. See above picture. (Note: Please connect the
communication cables in the right handlebar and upright post, avoid damaging the cable);
– Use 2pcs M8*15 screw to x each upright post, and then use 1pc M8*30*20 screw to x the hole
under each handlebar. (Note: The screw M8*30*20 is for adjusting the handlebar, it can not be
xed tightly, or else the tube will be damaged).
STEP 3
ASSEMBLY INSTRUCTIONS

ENG
VirtuFit Elite TR-1000i Treadmill
10
– Put the display on the console, and lock the two parts together with 4pcs M8*15 screw.
STEP 4
ASSEMBLY INSTRUCTIONS