STILFORD STMRT24WEK User manual

ASSEMBLY INSTRUCTIONS
Stilford Professional Meeting Room Table 2400,
3000 and 3600
STMRT24WEK / STPMR24OAK / STPMR24WNK /
STMRT30WEK / STPMR30OAK / STPMR30WNK /
STMRT36WEK / STPMR36OAK / STPMR36WNK
1/18
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call [phone] or email [email protected]
4 Cartons

2/18
Important
Estimated Assemble Time: 70min
Please check you have all hardware before assembling.
If you are missing any hardware, please contact Kyvas on [phone]
or email [email protected]
Please ensure you have the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
NOTE
Do not tighten screws before all screws are in the right place.
Do not use this product unless all bolts, screws and knobs are firmly secured.
Check that all bolts, screws and knobs are securely tightened at least
every 4
CAUTION
months.
If parts are missing, broken, damaged or worn stop using the product until
all repairs are made using manufacturer authorised parts.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials away from babies and children to
avoid danger of suffocation.
This item is not for outdoor use - unless stated otherwise.
Failure to follow these warnings could result in serious injury.
WARNING
CHILDREN MUST BE SUPERVISED.
DANGER
Officeworks Ltd.丨236-262 East Boundary Road 丨Bentleigh East VIC 3165 丨AUSTRALIA
Tools Required
CAUTION:
.
.
.
.
.
.
.
.
.
.
.
.
.
Do not use tools other than those required, as this can damage
your new item.
People Required General AdviceCustomer Service Contact Details
Assemble On A Clean Flat
Surface
More Than One Person Is Required
To Safely Assemble The Item
Spare Parts & Hardware
[phone]

8
8
8
6
6
6
6
6
6
7
7
7
72
2
2
2
2
2
4
4
5
5
5
3
3
3
3
1
1
Part Overview
3/18

2
4pcs
3
4pcs
5
2pcs
Part List
68
7
1
4/18
Parts located in Carton - STPRTB24B1
4pcs 2pcs2pcs
2
2pcs
4
2pcs
5
1pc
68
7
Parts located in Carton - STPRTB24B2
2pcs
2pcs 1pc
2pcs
Parts located in 2 xCarton -
STPMRT12WE / STPRMR12OA / STPRMR12WN /
STPMRT15WE / STPRMR15OA / STPRMR15WN /
STPMRT18WE / STPRMR18OA / STPRMR18WN

Adjust Feet
X 6pcs
GI
A
Hardware Pack located in Carton - STPRTB24B2
5/18
For missing hardware, please contact Kyvas on [phone] or email [email protected]
Other Hardware located in Carton - STPRTB24B2
(M6 x 16 mm)
X 44pcs
Connector
X 22pcs
Hardware Alocated in Carton -
Hardware List
STPMRT12WE / STPRMR12OA / STPRMR12WN /
STPMRT15WE / STPRMR15OA / STPRMR15WN /
STPMRT18WE / STPRMR18OA / STPRMR18WN
(M10 x 60 mm)
X 12pcs
B
Allen Key
M10-size
X 1pc
CD E F H
Allen Key
M8-size
X 1pc X 1pc
Plastic Cap
X 8pcs
(M8 x 16 mm)
X 44pcs

Step 1 6X
Step 2
I
6pcs
I
2
I
C
C
F
E
3
5
2X
3
CEF
8pcs 1pc1pc
2X
Step 3
8pcs 1pc1pc
C
E
F
C
F
E
3
2
3
2
C
CEF
6/18
Assembly

Step 4
CEF
4pcs 1pc1pc
C
4
4
5
C
E
F
4pcs 1pc1pc
C
E
F
C
E
F
C
2
24
4
Step 5
CEF
7/18

Step 6
B D F
4pcs 1pc 1pc
6
3
6
3
B
B
DF2X
B D F
2pcs 1pc 1pc
BB
DF
66
4
4
Step 7
8/18
Note: Do not tighten
the screw B fully
until you have
completed Step 12 or
Step15 or Step18 !
Note: Do not tighten
the screw B fully
until you have
completed Step 12 or
Step15 or Step18 !

90°
Note: Tighten the screws C fully after
you confirmed the part 7 & 8 are at
right (vertical)angle.
CEF
16pcs 1pc1pc
C
E
FC
C
E
FC
C
C
C
E
E
F
C
E
8
7
7
7
8
7
8
B
B
B
B
B
B
B
DF
B D F
6pcs 1pc1pc
Step 8
Step 9
9/18

Note: Assemble 3 different table sizes by adjusting the frame.
Option 1, size: W2400*D1200*H750mm
13-14
15-16
Option 2, size: W3000*D1200*H750mm
Option 3, size: W3600*D1200*H750mm
10/18
11-12

Step 10
1200
1200
Note: Adjust part 7 to be suitable for the table top
by below pre-drilled (marked in black)
G
6pcs
A
12pcs
H
8pcs
1
A
G
A
G
A
G
A
G
A
G
A
G
1
1
A
G
7
7
7
7
H
H
H
H
For W2400*D1200*H750mm Table
11/18

Step 11
Note: Tighten the screw B fully
after adjusting the leg at correct position.
DE
1pc 1pc
F
1pc
G
16pcs
A
32pcs
For W2400*D1200*H750mm Table
A
G
A
G
A
G
A
G
G
A
A
GA
G
A
G
A
G
A
G
A
GA
G
A
G
Step 12
For W2400*D1200*H750mm Table
DF
E
E
12/18
B

Step 13
Note: Adjust part 7 to be suitable for the table top
by below pre-drilled (marked in black)
G
12pcs 6pcs
H
8pcs
A
G
A
G
H
H
H
H
1
1
A
G
A
G
A
G
A
G
A
G7
7
7
7
1200
1500
1
For W3000*D1200*H750mm Table
13/18
A

Note: Tighten the screw B fully
after adjusting the leg at correct position.
G
16pcs
A
32pcs
Step 14
For W3000*D1200*H750mm Table
Step 15
For W3000*D1200*H750mm Table
DE
1pc 1pc
F
1pc
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
A
G
DF
E
E
14/18
B

Step 16
Note: Adjust part 7 to be suitable for the table top
by below pre-drilled (marked in black)
G
12pcs 6pcs
H
8pcs
A
G
7
7
For W3600*D1200*H750mm Table
1200
1800
A
G
A
G
A
G
A
G
A
G
A
G
H
H
H
H
7
7
1
1
1
15/18
A

E
G
16pcs
A
32pcs
Step 17
For W3600*D1200*H750mm Table
AG
AG
A
GA
G
A
G
AG
A
GA
G
A
GAG
AG
AG
A
GA
G
AG
AG
A
G
Note: Tighten the screw B fully
after adjusting the leg at correct position.
Step 18
For W3600*D1200*H750mm Table
DF
DE
1pc 1pc
F
1pc
16/18
B

Maximum Load Capacity: 50kg
is now complete and ready for use
17/18
Care Advice
Care Instructions - PVC/ Melamine Finish Desk
Keep away and protect from direct sunlight and heat.
Do not place sharp materials(knife, fork, etc) directly onto your furniture as sharp
material may scrape and damage the finish.
Clean up spills quickly. Water left over a prolonged period of time may cause
damage. Alcohol, perfume, nail polishes, aftershave and some medication may
cause severe finish damage if not cleaned immediately.
Use a clean, soft, dry, lint free absorbant cloth to clean your furniture. Do not use
any detergent as they may contain ingredients that may react and damage the finish.
Clean, check and tighten all parts regularly.
.
.
.
.
.
Safety Warning
.CAUTION - This product is intended to hold the maximum weight indicated.
Exceeding the maximum weight will result in instability and may cause injury.
Your Stilford Professional Meeting Room Table 2400, 3000 and 3600

Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
Warranty 15 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as intended
for 15 years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
.
18/18
to cosmetic damage;
to damage caused by consumables used in connection with the product (such as
cleaning products);
where the product has not been used in accordance with all provided instructions;
to damage arising from fair wear and tear;
where the product has not been subject to reasonable use;
where the product has been intentionally or negligently damaged;and /or
if the customer has attempted to repair the product.
.
.
.
.
.
.
To make a claim under this warranty, please return your product with your receipt or proof
of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty if provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
RECYCLE