Stirling STR-H200W User manual

Installation
Let’s get your new
198 L chest freezer ready to use!
Quick Start Guide
Model: STR-H200W
Connection
1
2
3
4
5
B
CAUTION! The freezer is heavy - transport it with care! To avoid back or other injury, we
recommend you ask someone for help or use a mechanical aid when moving it.
Getting it ready for use
Before you start installing the freezer, wipe the interior
surfaces and accessories with a damp cloth to remove
any dust from transit and storage. Dry thoroughly.
Installation
Tilt the freezer carefully – not more than 45 degrees – and
move it to its designated place. Use the roll wheels under
the back corners to help you position it in place and the
levelling feet at the front for adjustment, if necessary.
Avoid areas where the freezer would be exposed to direct
sunlight, heat, extreme cold ambient temperatures or
excessive moisture and high humidity. Installing it in the
coolest area of the room will save energy consumption
and running costs. Allow at least 10 cm clear space at the
back and sides of the unit, and 70 cm above, so air can
circulate freely around the freezer.
For comprehensive installation instructions, please consult the manual.
A
Turn over the page for a
description of the modes ...
Settling
Before plugging in your new freezer, let it stand upright for at least 4 hours to allow
the refrigerant gases to settle into the compressor.
Connection
Plug in the freezer and secure the power cord behind the unit, making sure the plug
is accessible after installation.
First use
The first time you turn the unit on, select the
appropriate mode (see overleaf) and set the
temperature control to the coldest temperature
in the range. Then, after 24 hours, adjust the
temperature to your needs.
5

Give us a call
Well done, you made it! Now sit back and relax ... your new 198 L chest freezer is
automatically covered by a 3 year in home warranty. V3.0
9
8
Digital control
C
7
Using the chest freezer
D
What? You mean this Quick Start Guide didn’t have ALL the answers? The manual has more
comprehensive instructions, or speak to us. Call our After Sales Support on 1300 112 534.
11
This appliance can be used as a chest
freezer, or as a refrigerated storage cabinet
for unfrozen food.
For convenient access and organised
storage, the cabinet is equipped with a wire
basket.
The control panel is located at the front of
the storage cabinet, in the bottom right-
hand corner. Use it to select your desired
cooling mode, adjust the temperature in
the cabinet and unlock the control panel.
(The system will be locked automatically
30 seconds after the last button operation.)
Press the FRIDGE button to use the
cabinet in “Fridge” mode and adjust
the temperature in the storage cabinet
between 2 °C and 6 °C. In “Fridge” mode,
the appliance is suitable for short-term
storage of fresh food. The temperature
range in this mode is low enough to
limit some bacterial growth, but it is
not suitable for long-term storage of
perishable foods.
Press the FREEZER button to use the cabinet as in “Freezer” mode and adjust the
temperature in the storage cabinet between -14 °C and -25 °C. In “Freezer” mode, the
appliance is suitable for freezing fresh food and long-term storage (up to three months)
of frozen food.
Press and hold the FRIDGE and FREEZER buttons for three seconds at the same time
to unlock the control panel. You can now select a mode or adjust the temperature.
Press the SUPER button to use the cabinet temporarily in “Super Freezing” mode. This
is recommended for fast freezing, for example, when you have added a large quantity
of fresh food to the freezer cabinet. Unless cancelled earlier, “Super Freezing” mode
will automatically revert to the previously set freezer temperature after 52 hours.
6
6
7
10
98
1110