Stirling GS14R-LS User manual

Filling the water tank
Let’s get your new 2-in-1 steam iron
& garment steamer ready to use!
Quick Start Guide
Model: GS14R-LS
Adjusting the steam head
3
1
2
This quick start guide contains basic instructions to get you started. For the full picture, please refer to the
supplied manual with comprehensive usage instructions and important safety advice.
A
Turn over the page for usage
instructions ...
Water usage
• To extend the product life, we recommend using purified water: distilled, demineralised, or cold, boiled
water. Always add cold water to the tank, hot water will damage the tank and the inside of the appliance.
• Never fill the water tank with chemical substances, perfumes, vinegar, mineral water, starch, descaling
agents, ironing aids, cleaning agents or liquids other than water when using the garment steamer. These
products may cause damage to the appliance.
• Before filling and refilling with water, always remove the plug from the mains power socket. Never refill the
water tank while the appliance is connected to the electricity supply as there is a risk of electric shock.
IMPORTANT: Prime the pump before rst use!
It is important that you prime the pump before using the garment steamer for the first time. This will ensure
steam is produced quickly when you need it. Please follow the instructions on page 13 in the manual.
Grip the water tank firmly and pull
it out of the main unit. Turn the
water tank over and twist open the
tank cap.
Fill the water tank with water, then
close the tank and tighten the cap.
Replace the closed water tank into
its space on the main unit.
B
The steam head position of your new garment steamer can be
rotated 90 degrees so you can steam items in vertical (hanging)
position, or steam-iron them on your ironing board.
5
5
4
12 3
Please refer to illustration (4) for the different buttons and to
illustration (5) for the rotation sequence.
With one hand, hold the steam head handle and press the
rotation button firmly until you hear the lock disengage. With
the other hand, grip the rotation support.
For horizontal ironing the steam head should be aligned
with the handle.
For vertical steaming the steam head should be rotated
90 degrees to the right.
Rotation support
Rotation button
Steam trigger
Steam self-lock button
4

What? You mean this Quick Start Guide didn’t have ALL the answers? The manual has more
comprehensive instructions, or speak to us. Call our After Sales Support on 1300 112 534.
Well done, you made it! Now sit back and relax ... your new steam iron &
garment steamer is automatically covered by a 1 year warranty. V1.0
D
C
6
9
7
Hang the garment to be steamed on a coathanger in a suitable area accessible
for steaming.
To start, plug in the appliance, turn the steam control knob to the desired
position and wait until the temperature light turns off.
Press down the steam trigger button for a burst of steam or press and pull it
towards you to lock for continuous steam.
Direct the steam away for a few seconds
before you start steaming your garment as
the initial steam may contain water droplets.
With one hand pull the garment flat and
steam it from top to bottom. We recommend
you put the anti-scald glove on the hand
you are using to pull the garment in place for
steaming.
Hold the steam head upright and direct the
steam towards the creases in the fabric.
Vertical steaming
Horizontal ironing
Make sure steam head is in the correct position for
horizontal ironing.
Place the garment on an ironing board and prepare
the appliance for use.
When the temperature light switches off, press the
steam trigger for a burst of steam or press and pull it
towards you to lock for continuous steam emission.
Guide the iron smoothly over the garment to
remove creases and wrinkles.
For dry-ironing, release the steam trigger
and the steam emission will stop.
To add a burst of steam when dry-ironing,
press the steam trigger briefly when the
temperature light is off, then release the
button. Repeat this action as required to
remove stubborn creases.
Release the steam trigger when you have
finished steaming/ironing the garment.
8
10
6
Press
and
hold the
steam
button,
or lock it
for con-
tinuous
steam
Temperature light
Steam button
78
Horizontal
ironing
9
10
If you need to replace the steam head on the main unit before the soleplate has cooled down, take utmost
care to avoid scalding. Only touch the rotation support when rotating the steam head.
CAUTION: Hot!
Give us a call