Stompa STK 4433-02 User manual

®
1
If you need help or have damaged or missing parts, call the Customer Helpline:
- Compact Bunk Bed
Ladder can be fitted right or left side.
Length - 196,8 cm
Depth - 105,0 cm
Height - 141,0 cm
Assembly Instructions - Please keep for future referenceSTK 4433-02
Dimensions
Important – Please read these instructions fully before starting assembly
E-mail:
04.02.2020
[email protected] 0844 8008475

2
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Assembly to be carried out by
a competent adult only.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• During assembly children
should be kept away from the
product due to possible risk of
injury.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Do not use this item if any
components are missing or
damaged
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Regularly check all fastenings
to ensure that they properly
tightened.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Safety and Care Advice
IMPORTANT
must be fitted with 4 safety-rails and a ladder or platform for the upper bunk.
The high bed / bunk bed meets the European EN 747:2012 A1:2015 standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 190 cm long and 90 cm wide. The total thickness must not
exceed 15,5 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of
injury from falls. Bunk beds and high beds can present a serious risk of injury from strangulation if not used
correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the
bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags.
Children can be become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining
pieces of furniture (e.g. cupboards) and the like. To avoid risk of serious injury the distance between
the top safety barrier and the adjoining structure shall not exceed 75 mm or shall be more than 230 mm.
Do not use the high bed / bunk bed if any structural part is broken or missing.
MAINTENANCE INSTRUCTIONS:
Ventilation of the room is necessary in order to keep the humidity low and to prevent mould in and
around the bed.
Always follow the manufacturer s instructions. Current legislation requires that the high bed / bunk bed
ASSEMBLY:
injury from falls.
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of
WARNING:
'
Check regulary that all assembly fastenings are properly tightened.
- READ CAREFULLY
- RETAIN FOR FUTURE REFERENCE

3
Please check you have all the fittings listed below
Components - Fittings
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Rulers - Use this ruler to help correctly identify the screws
23456789101112131415161718
234567 1 inch
1cm
A
x62
10x40x4 15x75
Tools reqiured
B
x8
C
7x60
D
x8
35x14x11 M6x80
E
x11
F
M6x10x13
G
x18
7x50x8 3,5x25
H
x56
I
3,5x35
J
x4
3,5x30
L
MNO
PQ
Philips screwdriver (medium)
Flathead screwdriver (medium)
Allen key (incl)
Small hammer
Rubber hammer
x2
71x20x20
R
x1
4mm
x8
D35
x11
D15
x4
D15x18
x16
D10x15
x24
D8x13
x14
D4x13
K

4
Please check you have all the panels listed below
Components - Panels
1
1
2
2
3
4
5
65
5
6
5
6
6
7
8
8
9
9
10
10
11
12
13
13
13
14
14
15
QTY PART LISTDIMENSIONBOX NUMBER
21900 x 148 x 19 mm2 of 2
2
11900 x 148 x 19 mm
11531 x 148 x 19 mm
4
4
2620 x 90 x 34 mm
2620 x 90 x 34 mm
2790 x 90 x 34 mm
2
1
11110 x 90 x 19 mm
1900 x 148 x 19 mm
802 x 148 x 19 mm
802 x 148 x 19 mm
790 x 90 x 34 mm
895 x 90 x 19 mm
3
28
1
360 x 70 x 25 mm
895 x 68 x 19 mm
NO.
1
2
3
4
5
6
7
8
9
10
11
Front bed rail
Rear bed rail
Rear safety rail
Leg
Leg
Leg
Short ladder rail
Long ladder rail 12
Front safety rail
End rail
End rail
Leg
13
14
15
Step
Slats
Vertical guard rails
1
320 x 45 x 19 mm
16Fittings
7
1 of 2
1 of 2
1 of 2
1 of 2
1 of 2
1 of 2
1 of 2
2 of 2
2 of 2
2 of 2
2 of 2
2 of 2
2 of 2
2 of 2
2 of 2

5
1
A
x62
10x40
1
2
3
4
5
x2
x2
x4
2xA
2xA
2xA
3xA
6x4
2xA
2xA
3xA
2xA
2xA
2xA
2xA

6
2
x8
C
7x60
10
x2
9
x2
8
x2
7
x2
C
CCC
4mm
3
4mm
D
x4
35x14
P
x4
D35
10
9
5
6
x2
P
D
D
P
P
D
35 mm

7
4
4mm
D
x4
35x14
P
x4
D35
7
5
6
x2
8
5
4mm
x4
M6x80
E
x4
F
M6x10x13
O
x4
D15
1
2
P
D
D
P
P
D
E+O
E+O
E+O
F
F
F
F
F
E+O

8
6
4mm
x6
M6x80
E
x6
F
M6x10x13
O
x6
D15
E+O
E+O
E+O
F
F
F
F
E+O
F
F
E+O
F
E+O
x4
15x75
B
x8
3,5x25
H
B
B
B
B
H
H
H
H
H
H
H
H
B
H
H
7
1
2
3

9
8
4mm
G+K
2x
G+K
2x
G+K
2x
G+K
2x
G+K
2x
G+K
2x
Ladder
right side
Ladder
left side
G+K2x
G
G
13
13
13
12
11
4
G
x12
7x50x12 D4x13
K
9
4mm
x1
M6x80
E
x1
F
M6x10x13
O
x1
D15
x2
D4x13
K
G
x6
7x50
J
x4
3,5x30
J
4x
15
L
x10
D8x13
M
x10
D10x15
L
2x
M
2x
L
2x
M
2x
L
2x
M
2x
L
2xM
2x
G
G
M
2x
L
2x
E+OF

10
10
L
x4
D8x13
x56
I
3,5x35
I
I
R
R
846 mm
846
14
1°
14
1°
x2
71x20x20
R
R
R
R
R
2°
14
60 - 73 mm 60 - 73 mm
56xI
L
L
L
L
14
14

11
10
4mm
10
9
56
P
D
D
P
10
9
56
P
D
D
P
x8
M6x80
E
x8
F
M6x10x13
O
x8
D15
L
x24
D8x13
M
x16
D10x15
D
x4
35x14
P
x5
D35
11
4mm
E+O
E+O
F
F
1
2
F
E+O
F
F
N
x4
D15x18
N
N
E+O
M
2x
L
2x
M
2x
L
2x
M
2x
L
2x
M
2x
L
2x
x2
x2
L
L
L
L