Stop Woofer DBC-SW-DC638 User manual

Dear dog lovers, our company and its employees
love pets and don’t want to do any harm to them.
That’s why in our bark correction collars only
humane ways of influence such as sound warning
and vibration are used.
Based on testing different models of the
StopWoofer it achieves efficiency of 75-80%
with the dogs that stopped barking within
one week, 10-15% of dogs need up to two
Manual
Stop W oofer Dog Bark Collar
DBC-SW-DC638
Thank you for purchasing the
Stop W oofer Bark Collar
The product has been specifically
designed for dogs and their owners

IMPORTANT! In case our product
didn’t help you to solve the problem
with the excessive barking, please
feel free to contact our support
team [email protected] and
we will help you or reimburse the
purchase.
!
Vibration — the impact on the dog by
mechanical vibrations of the collar
Sound warning — the impact on the dog
with a “beep” sound
Digital display — the screen located on the
top panel of the collar showing the sensitivity
level, the level of vibration, the charging level.
On the digital display you can see the icons of
the modes the collar is in.
BASIC CONCEPTS:
weeks and about 5% of dogs need more time.
Unfortunately, 3-5% of dogs aren’t susceptible
to bark correction though exposure to sound and
vibration.

Digits from 1to 7are displayed when you
tune the sensitivity level, where 1- is the
minimum level of the sensitivity, 7- is the
maximum level of the sensitivity. While
making the settings in the sensitivity mode
the red icon is on the display.
The default setting is level 4.
S
Digits from 1to 5are displayed when you
tune the vibration force, where 1- is the
minimum level of the vibration, 5- is the
maximum level of the vibration. While making
the settings in the vibration mode the green
icon is on the display.
While tuning the vibration force in the
vibration+sound mode, the blue icon is
on the display. The default setting is level 5.
While charging the collar there is the icon
running on the display. It shows the level of
the battery charged.
Sensor — a highly sensitive component of
the collar that recognizes and detects throat
vibration (barking) of the dog.

Silicone contact point guards — are an
addition to vibration contact points. They
can help to reduce chafing of your dog’s skin
from direct contact with the vibration contact
points.
Collar sensitivity — the ability of the sensor
to catch the vibration of the dog’s throat.
Adjusting the level of sensitivity you adjust
how sensitive the sensor is to picking up the
vibration of your dog’s throat. The higher the
sensitivity level, the easier it will be for the
sensor to activate.
Dog’s sensitivity — the ability of the dog
to experience collar impacts and respond to
these influences.
The latest technology of the processor
protects the collar from false detection.
Vibration contact points — contacts
installed on the collar through which the dog
receives the vibration impact.

the STOPWOOFER bark collar
with an adjustable strap
2 pairs of silicone contact
point guards
User manual
USB cable
Testing device
LifeTime Warranty
Package box
EQUIPMENT

We provide a LifeTime Warranty on this
product. To activate it, please follow the
steps given in the LifeTime Warranty flyer
or on our Youtube channel. If you have any
questions feel free to contact our support
team [email protected]
It works in two modes “Vibration”
and “Vibration+Sound”
7levels of sensitivity
7levels of bark correction
in the mode “Vibration”
7levels of bark correction
in the mode “Vibration+Sound”
It is suitable for dogs ranging in size from
6-110 lbs
An adjustable strap from 5,9 to 21,65
inches
5levels of vibration
2vibratory motors
Rechargeable battery 500 mah
Waterproof
TECHNICAL CHARACTERISTICS

The main element of the StopWoofer bark
collar is the sensor. It recognizes and detects
throat vibration (barking) of your dog.
The sensor detects barking and the collar gets
activated and influences the dog with a vibration
or vibration & sound warning depending on the
selected mode of the bark collar.
WORKING PRINCIPLE
DOG’S
THROAT
VIBRATION
COLLAR
RECEIVER
SENSOR

The impact of the collar on each dog can vary
as each dog has a different level of sensitivity
to the impact, and it also depends on the
sensitivity, thickness and structure of the skin,
fat and muscles, nervous excitability etc.
In accordance with the requirements of
humanity the StopWoofer Bark Collar has a
special system of restrictions for the duration
and intensity of exposure to the dog.
IMPORTANT!
!

LEVELS OF CORRECTION IN THE MODE
“VIBRATION”:
1 bark: Vibration 0.5 second
2 bark: Vibration 1 second
3 bark: Vibration 1.5 second
4 bark: Vibration 2 seconds
5 bark: Vibration 2.5 seconds
6 bark: Vibration 3 seconds
7 bark: Vibration 4 seconds
8 bark: Sleep mode. For the dog’s safety
the collar turns off for 1 minute.
1 bark
Sleep mode
0.5 sec.
1 minute
1 sec.
1.5 sec.
2.5 sec.
2 sec.
3 sec.
Vibration
4 sec. 2 bark
3 bark
4 bark5 bark
6 bark
7 bark

LEVELS OF CORRECTION IN THE MODE
“VIBRATION+SOUND”:
1 bark: Sound Warning 1.6 second then
Vibration 0,5 second
2 bark: Sound Warning 2.8 seconds then
Vibration 1 second
3 bark: Sound Warning 5 seconds then
Vibration 1,5 second
4 bark: Sound Warning 5 seconds then
Vibration 2 seconds
5 bark: Sound Warning 5 seconds then
Vibration 2.5 seconds
6 bark: Sound Warning 5 seconds then
Vibration 3 seconds
7 bark: Sound Warning 5 seconds then
Vibration 3.5 seconds
8 bark: Sleep mode. For the dog’s safety the
collar turns off for 1 minute.

The collar moves to the next level of correction
consistently and only if the dog continues to
bark. If the dog does not bark for 30 seconds,
then the collar returns to the first level of
correction.
After “sleep mode” activation the collar returns
to the first correction level.
1
2
IMPORTANT!
!
1 bark
Sleep mode
1 minute
0.5 sec.
1 sec.
1.5 sec.
2 sec.
2.5 sec.
3 sec.
4 sec.
2 bark
3 bark
4 bark5 bark
6 bark
7 bark
8 bark
1.6 sec.
2.8 sec.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec. Vibration
+Sound

DEVICE OVERVIEW
On/Off/
Level tune
Battery
charging level
Sensitivity
Mode of
operation
Vibration Vibration+Sound
S
Sensor
Silicone point
guards USB charging
port

IMPORTANT!
Step 1: Place the silicone contact point
guards on the vibration contact points (for
lessening of the chafing of the dog’s skin)
Step 2: Turn on the collar by pressing the
button on the top panel of the collar till the
digital display lights up.
Before using the collar please test the full cycle
of correction.
IMPORTANT!
If the icon is blinking, the battery is
discharged. Please charge the device. By default
when you turn on the collar the Sensitivity level
is 4, Vibration level is 5. In case after having set
the Sensitivity level you don’t choose any other
mode within 5 seconds, the collar automatically
goes to Vibration+Sound mode.
COLLAR SETTING
!
!

Step3: Test the collar
Activate the collar with the help of the Testing
device that comes with the collar. Put the
testing device’s speaker as close as possible to
the hole on the back panel of the collar (where
the sensor is) and turn on the testing device
(toggle the switch into ON position on the side
panel of it). The testing device will start to play
the sound of the dog barking.
To test the full cycle of correction in the mode
“Vibration+Sound” (blue icon on the screen)
you should keep the testing device turned on till
the full cycle of correction is over and the collar
activates “sleep mode” (after the 8th cycle of
correction).

Step 4: Tune the Sensitivity Level
By pressing the button choose the mode
of setting the level of sensitivity. The red icon
will be on the screen.
By pressing the button adjust the sensitivity
level from 1-7, where 1- is the minimum
sensitivity level, 7- is the maximum sensitivity
level.
To test the full cycle of correction in the mode
“Vibration” choose the mode “Vibration” by
pressing the button.
The green icon will be on the screen. Use
the testing device to check the full cycle of
correction in the current mode.
S

The higher the level of sensitivity the easier
the sensor will get activated. After turning off
and turning back on the collar your settings will
remain. While tuning the sensitivity, the numbers
will be on the digital display.
The collar setting should be individually
adjusted. We recommend starting with the
minimum level - 1, and level up gradually till
the maximum level - 7. You should choose and
apply that level of sensitivity, that will make
the collar get activated correctly on your dog’s
barking
Settings recommended for dogs of different
size and weight
size sensitivity levelweight
small 6-22 pounds 6-7
5-7
4-5
2-3
22-66 pounds
66-88 pounds
>88 pounds
middle
big
huge
IMPORTANT!
!

Step 5. Tune the vibration level
“Vibration” mode
By pressing the button choose the
“Vibration” mode. The green icon will be
on the screen. By pressing the button adjust
the vibration level from 1-5, where 1- is the
minimum vibration level, 5 -is the maximum
vibration level
“Vibration+Sound” mode
By pressing the button choose the
“Vibration+Sound”mode. The blue icon
will be on the screen. By pressing the button
adjust the vibration level from 1-5, where 1 - is
the minimum vibration level, 5- is the maximum
vibration level.
The correct settings of the sensitivity level
makes the efficiency of the collar’s work higher.
IMPORTANT!
!

The collar setting should be individually
adjusted. We recommend starting with the
minimum level - 1,and level up gradually till
the maximum level - 5. You should choose
and apply that level of vibration, that will make
the collar correct your dog’s barking and its
unwanted behavior most effectively.
IMPORTANT!
IMPORTANT!
The correct placement and settings of the collar
are important for its effective work.
Efficiency of the collar’s influence on the dog
depends on the correct vibration level setting.
If the icon is blinking, the battery is
discharged. Please charge the device.
Step 6: Put the collar on the dog
!
!
1

4
Put the dog in a comfortable position for it
and for you to apply the collar correctly
Put the collar on your dog — high under the
jaw and tighten the strap tight.The receiver
(main body) of the collar must be located
exactly in the middle of the neck, a couple of
centimeters above or below your dog’s Adam’s
apple
For your dog’s comfortable wearing, please
adjust the strap correctly. Put the collar on the
dog, leave a couple of inches so that the collar
will fit your dog’s neck when it grows up or
if it has thick fur. Then take it off, cut off the
excess and burn the cut with fire for a couple of
seconds. For the safety of your pet please do it
out of reach of your dog.
2
3

1 2 3
If you don’t tighten the strap tight enough, it
won’t work correctly. There will be no contact,
besides it can rub the dog’s neck. To check the
collar’s fit, insert your finger between the end
of the contact points and the dog’s neck. The
finger should be snug but the dog should not
experience breathing problems. In some cases it
may be necessary to shorten the fur around the
contact point for direct contact.
Let your dog wear the collar for a couple of
minutes and then check again if it fits well.
When the dog gets used to the collar, double
check the correct placement of the collar.
5
IMPORTANT!
!