Prevue Hendryx 21006 User manual

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL cus omerservice @ prevuepe .com
21006 (WAVETOP) — 03 /20 — A4 M de in Chin for Prevue Pet Products, Inc., 224 N M plewood Ave, Chic go IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
Instructions online at www.prevuepet.com
1PIECES
2PIECES
Starting from the bottom, catch the extended
hooked wires of the side panel onto the back panel.
he notched wire stays on the interior of the cage
and acts as a backstop against the pull of the
hooked wires.
Link one complete seam together, then use the
same method on the other seam to finish.
21006 Southbeach Collection/WaveTop
ASSEMBLY
MODEL #
DETAIL OF INSIDE BACK, RIGHT CORNER
Place the removable grille into
the base and slide the removable
tray into the opening.
Set the assembled mesh into the base and
insert the extended loops along the sides of
the mesh into the open slots on the base.
Along the front and back edges, set the
mesh between the raised tabs and the rim.

21006 (WAVETOP) — 03 /20 — A4 For more wonderful c ges, toys, nd ccessories for c ts, birds, chickens, r bbits, ferrets, dogs nd sm ll nim ls, visit www.prevuepet.com
*CLEANING INS RUC IONS
o prolong the life of your new Prevue Pet Products cage, we
recommend:
→When cleaning the cage and parts, use a soft cloth or
non-abrasive scrub pad (such as Prevue’s Cage Saver (#109)).
→Wash all parts with warm water and a mild environmentally
friendly, pet-safe soap.
→Rinse thoroughly.
→Hand dry all parts completely with a soft dry cotton cloth before
reassembling the cage.
→Do not leave plastic parts in the sun to dry as they may warp.
3PIECES
4PIECES
Assembly completed. {
SNAP THE TWO-PIECE
CUPS TOGETHER
Assemble the two-piece cups.
Hold the hinged cup door up
and insert a cup into place.
Be cautious when closing the
door—keep it from snapping
down onto the cup.
Install perches on
horizontal wires at
an equal height.
When installing a
perch on a vertical
wire, set the
bottom to rest on
a horizontal wire
for stability.
Starting on one end, catch the roof on the looped
hooks along the side.
hen, catch the roof on the hooks along the front
and back panels. Finish with catching the rooftop on
the hooks at the opposite end.