STORZ & BICKEL Volcano Hybrid Instruction manual

2. Switch heat on
3. Choose temperature
2. tap
[ HEAT ]
3. tap
[+] / [ - ]
7. Put Tube on Filling
Chamber
4. Screw on Filling Chamber
5. Preheat substance for
approximately 5 sec.
9. Inhale
7.
6. tap
[ AIR ]
ok
6. Pull Valve Balloon tight
7. Put Valve Balloon on
Filling Chamber
8. Observe vapor density
9. Turn off Air Pump 14. Inhale 11. Detach Valve Balloon
from Filling Chamber
13. Attach Mouthpiece
to Valve Balloon
2. Switch heat on
3. Choose temperature
tap
[ AIR ]
Do not overll!
Do not overll!
4. Screw on Filling Chamber
5. Preheat substance for
approximately 5 sec.
5. tap
[ AIR ]
5. tap
[ AIR ]
4.
4.
6.
10. Unscrew Filling Chamber
with full Valve Balloon
10.
7.
1. Fill Filling Chamber with
ground substance and screw
on Filling Chamber Cap
6. Turn off Air Pump 8. Clean Mouthpiece
This QUICK START MANUAL will guide you through the
main steps on how to use your new VOLCANO HYBRID
with the new Tube or the Valve Balloon. For detailed
directions always refer to the included Instructions for
Use or contact us at [email protected].
Please clean the Mouthpieces before use.
BALLOON
TUBE
2. tap
[ HEAT ]
3. tap
[+] / [ - ]
12. Clean Mouthpiece
QUICK START MANUAL
1. Fill Filling Chamber with
ground substance and screw
on Filling Chamber Cap

QUICK START MANUAL
SN
Control your HYBRID via App
Save serial numbers
Adjust auto-shutoff
Personalize settings
Create workows
STORZ & BICKEL APP
Compatible with Android 6.0 and above
For more information visit www.storz-bickel.com
Get rmware updates
180 C
15 min
Workows Iterations
Temperature Settings VOLCANO Information
STORZ & BICKEL GmbH & Co. KG · In Grubenäcker 5-9 · 78532 Tuttlingen · Germany · © by STORZ & BICKEL GmbH & Co. KG · VHAL-30-092 12-2019 · Subject to alterations · All rights reserved