Streetwize SWPET16 User manual

Folding Slanted Dog Crate
SWPET16 SWPET17
Medium
30” (76cm)
1. Remove the dog crate from its packaging and
dispose of the packaging in the correct manner.
Figure 1
Streetwize: Streetwize Accessories, Unit1, Royce Trading Estate, Ashburton Rd West, Trafford Park, Manchester, M17 1RY
For Product Support:
E: [email protected]
T: [phone]
For Trade Enquiries:
E: [email protected]
T: [phone]
www.streetwizeaccessories.com
Figure 2
2. To assemble the crate, first fully unfold the back and
the joint front/top panel. (See Figure 1 and 2)
Small
24” (61cm)
Assembly Instructions
Please note: Images below used for the instructions show the small crate. The medium-size crate follows the
same assembly instructions. To assemble the product, please follow the instructions below:

3. Assemble the back and ONE of the side panels
and join them together using the hooks found on
the side of the panels. Figures 3 and 4 shows the
side and back panel being joined together with the
hooks. And Figure 5 shows the back and side panel
assembled together.
4. Then, get the joint front/top panels and place it over
the top as shown in Figure 6 & 7.
Figure 3 Figure 6
Figure 7Figure 4
Figure 5
5. Ensure the front panel is hooked onto the side panel
that is assembled (Figure 8).

6. Then hook the top panel to both the back panel and
the side panel (Figure 9).
8. To finish, check to see if all hook points are properly
in place. Figure 11 shows all the hook points
(circled in red).
7. Once done, assemble the remaining side panel and
secure into the hooks (Figure 10).
9. To open the door, lift the handle (as shown in Figure
12) and pull (Figure 13).
Figure 8
Figure 9 Figure 12
Figure 13Figure 10
Figure 11

Placing The Crate In Your Boot
When placing the crate inside your boot, the doorway of the crate should be facing towards the boot door.
Important: To help your pet dog get used to being inside the crate, you may need to train your dog to
help him/her to become accustomed to the crate.
After you have finished the dog crate, simply disassemble and fold the crate. Store in a safe place for the future.
Maintenance
Cleaning the Tray Base
The dog crate comes with a pet-friendly tray base
that can be washed and clean. Carefully remove
the tray from the crate and wash the tray with
good quality washing up liquid.
Technical Specification
Manufacturer’s Warranty
This product comes with a 12 month manufacturer warranty which starts on the date of purchase. The
warranty covers technical faults during the 12 month period. Any issues caused by accidental damage
or wear and tear is not covered by this 12 month manufacturer warranty.
For any warranty queries, please contact the retailer where you purchased the product.
Health & Safety
• Dogs that suffer from anxiety or panic attacks
should not be left unattended in a cage as they
may harm themselves and damage the cage. You
must remove collars and harnesses from your pet
before putting into the crate
• This crate (when assembled) should NEVER
be placed on your vehicle’s rear seat or front
passenger seat with your pet dog inside. This
crate should only be inside the boot.
• The crate should never have more than one dog.
This crate should only hold one dog.
• When placing your pet dog inside the crate,
ensure they have enough room to sit, lie down
and stand. Measurement of your pet dog before
purchase is highly advised.
• Please ensure you have measured your vehicle’s
boot to make sure the crate comfortably fits.
• To help your pet dog get used to being inside the
crate, you may need to train your dog to help
him/her to become accustomed to the crate
Cleaning The Crate
To clean the crate, use a slightly damp cloth to
wipe the crate.
Product Streetwize Folding Slanted Dog Crate
Supplier Code SWPET16 (Medium) / SWPET17 (Small)
Crate Material Steel
Tray Base Polypropylene