Stryker SR-89MC User manual
A1.140107
CONTENTS
FUNCTIONS AND CHARACTERS.......................................................1
STANDARD ACCESSORIES................................................................2
OPTIONAL ACCESSORIES.................................................................2
INSTALLATION.....................................................................................2
Microphone connection................................................................................2
Antenna connection.....................................................................................3
Power connection ........................................................................................3
Fuse replacement........................................................................................3
Install Microphone hanger.............................................................................4
Intall external speaker..................................................................................4
Install earphone ...........................................................................................4
Install Remote PTT cable.............................................................................4
KNOW ABOUT THIS RADIO................................................................5
HOW TO USE THIS RADIO..................................................................6
Power on radio.............................................................................................6
Automatical Power on radio.........................................................................6
Channel control............................................................................................6
Choose Norms.............................................................................................6
Volume control (1-56 levels, Default level 54) .............................................7
Mute Function..............................................................................................7
Squelch control (1-28 Levels, Default Level 6)............................................7
ASQ control .................................................................................................7
LCD display .................................................................................................8
AM/FM mode ..............................................................................................8
Transmitting .................................................................................................8
Receiving.....................................................................................................8
Time Out Timer ............................................................................................9
LCD color.....................................................................................................9
Beep prompt ................................................................................................9
EMG channel...............................................................................................9
Keypad lock ...............................................................................................10
Frequency mode........................................................................................10
Scan...........................................................................................................10
Memory channel ........................................................................................10
Using Memory Channel .............................................................................10
DW channels ............................................................................................. 11
Using DW function..................................................................................... 11
Factory reset.............................................................................................. 11
12
Specication ......................................................................................
1
FUNCTIONS AND CHARACTERS
Full Aluminum body offer best heat radiation
Remote control microphone with Wide angle Dot matrix LCD
3 color display: Blue, Purple, Orange
Dual watch
Full channel scan
EMG Channel CH9/19
SQ and ASQ Control
4 Memory channels for each Norm
SQ, VOL, voltage level display
Field strength display
Automatic Power on/Manual Power on
Time Out Timer
Keypad lock
Channel and Frequency mode
Optional earphone for Microphone
Optional remote PTT control cable
2
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
INSTALLATION
Screws for bracket
Hanger
Pads for bracket
Self-tapping Screws
Adjusting knobs Pads
Fuse(2A,250V)
Choose a conveniet location to install the radio.
1. Mark the location for screws by tracing the bracket.
2. Attach the bracket using the supplied screws.
3. Secure radio base into install bracket and lock in position by tightning knobs.
Microphone connection
1. Plug microphone connector into jack.
2. Pull on the dustproof cover for microphone connector.
Earphone
HS03
Remote PTT Control Cable
EK01
3
Antenna connection
Power connection
Note: Never press PTT before install the antenna, it could damage the radio.
1. Screw on the PL-259 from your antenna into antenna jack.
2. For proper operation of this radio, it is necessary to install the antenna in a well
grounded place, and adjust the SWR.
* Please consult with your local dealer for choosing and intallation of suitable antenna.
This radio requires a 13.2V power supply.
Connect the red wire to the positive terminal of the battery, and the black wire to the
negative terminal of the battery.
Fuse replacement
This radio requires 2A, 250V fuse
1. Open the fuse holder
2A, 250V FUSE
IN-LINE
FUSE HOLDER
2. Replace the fuse and screw on the holder.
FUSE
IN-LINE
FUSE HOLDER
IN-LINE
FUSE HOLDER
IN-LINE
FUSE HOLDER
4
Intall Microphone hanger
Connecting an external speaker
Connecting hearphones
Connecting a Remote PTT cable
1. Choose suitable location and mark for screw point.
2. Attach the hanger using the supplied screws.
This radio can use a 4-8 ohm, 4W external speaker.
1. Install the external speaker in the desired location.
2. Plug in the speaker connector into the jack.
1. Open the jack cover
2. Plug in the hearphone into MIC/SP jack.
1. Open the jack cover
2. Plug in the Remote PTT cable into PTT jack.
5
KNOW ABOUT THIS RADIO
1FUNC/FRQ Function menu / frequency mode
2EMG/M1 EMG CH9 and CH19, or program with second function
3DW/M2 Dual watch, or program with second function
4SC/M3 Channel scan, or program with second function
5AF/M4 AM/FM selection, or program with second function
6VOL-, Squelch level - Decrease volume or Squelch level
7VOL+, Squelch level + Increase volume or Squelch level
8MT/SET Mute, Menu, Lock key
9PTT Transmitting
10 SQ, ASQ SQ/ASQ switch
11 POW Power key
12 UP Channel UP
13 DN Channel down
14 TX indicator
15 RX indicator
16 LCD
17 Ext MIC/SP jack
18 Ext remote PTT cable jack
19 Mike
20 Speaker
PTT
9
10
18
17
6
HOW TO USE THIS RADIO
Power on radio
Automatic Power on
Channel control
Choose Norms
1. Press key to turn on the radio.
1. Short Press key, F Icon appear and flashes.
2. Short Press key to enter Menu.
3. Repeatly short press key until LCD displays
BAND: XXX
4. Press or to choose the norms
5. Short press any other key to confirm and exit.
:
When the radio is on, hold esaelernehtdnaffosithgilbbbDCLehtlitnuyek
key, the radio will power off.
2. Adjust squelch level until you can hear background noise, refer to Page 7 for
Squelch level setup.
3. Adjust volume level to the desired level, refer to Page 7 regarding Volume level setup.
1. Short Press or key to choose
the desired channel.
2. Hold or key to choose channels faster.
DN
POW UP
1. Short Press key, F Icon appear and flashes.
2. Short Press key to enter Menu.
3. Repeatedly short press key until LCD displays
POR: XXX
4. Press or to choose POR: ON.
5. Short press any other key to confirm and exit.
Repeat the above operation will turn off Automatic power on.
7
ASQ control
1. Hold SQ/VOL key until the LCD displays AQ.
The ASQ function was turn on.
2. Repeat above function will switch between SQ and
ASQ, in ASQ mode, SQ squelch level setup menu
will disappear and LCD displays SQ : AQ
Volume control ( 1-56 levels, Default level 54 )
Mute Function
1. Press SQ/VOL key repeatedly, until LCD display VOL: XX
XX stands for volume level.
2. Short Press or key to choose wanted volume level.
3. Hold quickly increase volume level, hold will quickly decrease volume level.
1. Short press will quickly mute the speaker, and
LCD displays VOL:MT
2. Press again, the volume will resume to
previous volume level setting.
PTT
Squelch control ( 1-28 Levels, Default Level 6)
1. Choose a channel which is not busy.
2. Short Press SQ/VOL key repeatedly until LCD
displays SQ: XX
XX stands for Squelch level.
3. Short press or key to choose desired
squelch level.
4. Hold or results in faster adjustment of squelch level.
5. Short press key until the noise just appears, then short press until the noise
just disappears the squelch level setup is done.
The higher the squelch level selected, the stronger signal required to open the speaker and
hear.
8
LCD display
FM/AM Mode
Func
M1-M4:
Storage location
Scan
Volume level,
SQ:11 Squelch level
RX signal strength,
PWR: TX signal strength.
Current Voltage
Working norm
Current channel
1W/4W: Power level
CH9/19
Dual watch
ASQ
AM/FM mode
1. Short press key to switch between AM/FM
mode.
2. Corresponding mode will displayed in the LCD.
Keypad lock icon
Dot matrix LCD display for channel number, frequency and operations.
2 Digits for display of channel number and Norms
5 Digits for display of frequency and Norms
Transmitting
1. Hold [PTT] key, TX LED light will turn red.
morfyawa"57.tuobaenohporcimehtdloH.2
your mouth and speak in a normal tone.
edomXRotnrutoidareht]TTP[esaeleR.3
TX LED indicator light will off.
Receiving
The radio will stay in RX mode when it is not
transmitting, the RX LED indicator light will on.
9
Time Out Timer
1. Short Press key, F Icon appear and flashes.
2. Short Press key to enter Menu.
3. Repeatly short press key until LCD displays
TOT: XXXX
4. Press or to adjust the TOT time.
5. Short press any other key to confirm and exit.
LCD color
Beep Prompt
1. Short Press
2. Short Press key to enter Menu.
3. Repeatly short press key until LCD displays
COL: X
4. Press or to choose the color.
5. Short press any other key to confirm and exit.
1. Short Press key, F Icon appear and flashes.
2. Short Press key to enter Menu.
3. Repeatly press key until LCD displays
BEEP: XX
4. Press or to choose ON or OFF.
5. Short press any other key to confirm and exit.
EMG channel
1. First short press will choose CH9, the LCD
displays EMG Icon.
2. Short pressing again will choose CH19.
3. Third short press of will resume to last non
EMG channel.
flashes.key, F Icon appear and flashes.
10
Keypad lock
1. To avoid wrong operation of keys, you can hold
key to lock the keypad.
2. The LCD displays .
3. Repeat the above function to unlock the keypad.
Frequency mode
1. Hold for over 5 seconds, the display will
change to frequency mode.
2. Repeat hold for over 5 seconds, the display
will change to channel mode.
Scan
1. Set SQ or ASQ firstly.
2. Short press
SC/M3
key to start scanning the LCD
displays SC.
3. Press any key to stop scan, SC disappear.
Memory channel
In each band, you can store 4 channels into M1, M2, M3, M4 for fast selection.
1. Choose the channel to be stored
2. Hold the memory key (M1, M2, M3, M4) to store it.
3. The corresponding memory channel will show on
LCD, the storage is done.
Using Memory Channel
1. Short press key F appears in LCD and flashes.
2. Short press the memory key ( M1, M2 ,M3, M4 )
3. F disappears, the memory channel you chose will display in LCD.
11
DW channels
Two channels need be pre-stored for dual watch function.
1. Short Press key, F Icon appear and flashes.
2. Short Press key to enter Menu.
3. Repeatly short press key until LCD displays
DW0: XX
4. Press or to choose first channel for
DW.
5. Repeatly short press key until LCD displays
DW1: XX
6. Press or to choose second channel for DW.
7. Short press any other key to confirm and exit.
Using DW function
1. Short press
DW/M2
key, the DW flashes in LCD, the
radio enter Dual watch mode.
Factory reset
1. Hold to Power off radio.
2. Hold key, then press key and hold
key until LCD disaplays RE S.
3. Release , the radio reset to factory defualt
and automatically powered off.
12
TRANSMITTER
Power Output 4/8W
Transmission interference inferior to 4nW(-54dBm)
Frequency Response 300-3000Hz
Modulated signal distortion inferior to 5%
Output Impedance 50 ohms
RECEIVER
Sensitivity Less than 1uV for 10dB(S+N)/N
Image Rejection 70dB
Adjacent Channel Rejection 60 dB
IF Frequencies 1st 10.695MHz
2nd 455KHz
Automatic Gain Control(AGC) Less than 10dB change in audio
Output for inputs from 10 to 50000uV
Squelch less than 1uV
Audio Output Power 2Watts
Frequency Response 300-3000Hz
Specication
GENERAL
Modulation Mode AM/FM
Frequency Range 28.000-29.700Mhz
Frequency Tolerance 0.005%
Input Voltage 13.2V
Dimensions(in mm) 112mm(L) x 143mm(W) X 30mm (H)
Weight 785g
Ferquency Control PLL Synthesizer
Operating Temperature Range -20° C TO + 55° C
Current Drain
Transmit 1.4A MAX
Receive Squelched 0.4A
VOL Max 1.3A
Antenna Connector UHF,SO-239
Table of contents
Other Stryker Transceiver manuals
