Strymon Flint User manual

tremolo & reverb
QUICK START GUIDE

TOP PANEL FUNCTIONS
®
MIXINTENSITY
COLORSPEED
DECAY
‘61 harm
‘63
tube
‘65 photo
REVERB
BYPASS
TREMOLO
BYPASS
TREMOLO REVERB
‘60s
‘70s
‘80s
tremolo & reverb
TREMOLO
Switches between 3 tremolo types:
•‘61 harm - Harmonic band filtering
•‘63 tube - Power Tube Bias
•‘65 photo - Photocell
REVERB
Switches between 3 reverb types:
•‘60s - Spring Tank
•‘70s - Electronic Plate (solid state)
•‘80s - Studio Rack Hall
MIX
Controls the reverb wet mix from
100% dry at minimum to 100% wet
with no dry signal at maximum. Set
to 3 o’clock for 50/50 dry/wet mix.
COLOR
Varies the reverb tone from
darker at low settings, to
brighter at higher settings.
REVERB BYPASS
Engages and disengages reverb. LED
ON indicates eect is engaged.
INTENSITY
Controls the intensity or depth
of the tremolo eect.
SPEED
Varies the tremolo LFO
frequency from slow to fast.
TREMOLO BYPASS
Engages and disengages
tremolo. LED ON indicates
eect is engaged. DECAY
Varies the reverb time from short
to long. The ‘70s and ‘80s verbs
will approach ‘infinite’ decay at
maximum.

REAR PANEL CONNECTIONS
EXP
INPUT
9VDC
+-
RIGHT OUTLEFT OUT
INPUT
High impedance mono or TRS
stereo input (internal jumper
configurable).
EXP
Connect a standard TRS
expression pedal for continuous
control over any selectable knob
parameter. To select the knob
controlled by the expression
pedal, hold the TREMOLO
BYPASS footswitch during power
up. The first knob turned is then
assigned to the expression pedal.
The maximum position the knob
is turned up to becomes the
expression pedal “toe down”
maximum value.
STEREO OUTPUTS
Use left output for mono
operation.
ADD EVEN MORE CONTROL & FLEXIBILITY
Connect the optional Strymon Miniswitch to quickly access a saved favorite setting
or set a tap tempo for the tremolo. See strymon.net/support/flint for more details.
POWER
Use an adapter with the
following rating: 9VDC
center negative. 250mA
minimum.

SECONDARY FUNCTIONS & SAMPLE SETTINGS
MIXINTENSITY
COLORSPEED
DECAY
‘61 harm
‘63
tube
‘65 photo
TREMOLO REVERB
‘60s
‘70s
‘80s
MIXINTENSITY
COLORSPEED
DECAY
‘61 harm
‘63
tube
‘65 photo
TREMOLO REVERB
‘60s
‘70s
‘80s
MIXINTENSITY
COLORSPEED
DECAY
‘61 harm
‘63
tube
‘65 photo
TREMOLO REVERB
‘60s
‘70s
‘80s
MIXINTENSITY
COLORSPEED
DECAY
‘61 harm
‘63
tube
‘65 photo
TREMOLO REVERB
‘60s
‘70s
‘80s
MIXINTENSITY
COLORSPEED
DECAY
‘61 harm
‘63
tube
‘65 photo
TREMOLO REVERB
‘60s
‘70s
‘80s
MIXINTENSITY
COLORSPEED
DECAY
‘61 harm
‘63
tube
‘65 photo
TREMOLO REVERB
‘60s
‘70s
‘80s
TWEED SURF RUMBLE TUBE BIASED
NOTE: Secondary functions are accessed by holding both footswitches while turning control knobs.
TREMOLO BOOST/CUT Controls the +/- 3dB boost or cut to the
tremolo when it is engaged.
REVERB BOOST/CUT Controls the +/- 3dB boost or cut to the reverb
when it is engaged.
TAP DIVISION Sets the desired tap division for the tremolo LFO
when an external TAP footswitch is used.
EFFECT ORDER Sets the signal chain order of the reverb & tremolo.
®
‘61 harm
‘63
tube
‘65 photo
REVERB
BYPASS
TREMOLO
BYPASS
TREMOLO REVERB
‘60s
‘70s
‘80s
tremolo & reverb
(EFFECT ORDER)
(REVERB BOOST/CUT)
TREM
> VERB
VERB
> TREM
1/16
1/8
1/4
(TREMOLO BOOST/CUT)
(TAP DIVISION)
TRIPLET

REV C
strymon.net