Strymon Lex-rotary User manual

QUICK START GUIDE

TOP PANEL FUNCTIONS
PREAMP
DRIVE
FAST ROTOR
SPEED
BYPASSSLOW/FAST
®
rotary
MIC DISTANCE
HORN LEVEL
FAST ROTOR SPEED
Controls the speed of the rotors
in FAST speed.
MIC DISTANCE
Varies the distance of the stereo
mics from the horn rotor and
the single mic on the woofer
rotor. Turn towards minimum for
a more pronounced, aggressive
horn sound with mics up close.
Turn towards maximum for more
ambience.
PREAMP DRIVE
Controls the drive of the rotary
cabinet’s tube preamp and
phase inverter stages. Turn up
for a more overdriven cab sound.
BYPASS
Engages and disengages eect.
Bypass mode is true bypass. LED
on indicates that the eect is
engaged.
SLOW/FAST
Changes the motor speed from
fast to slow. HOLD for brake.
HORN LEVEL
Controls the output level of the
high frequency horn rotor.

REAR PANEL FUNCTIONS
EXP
INPUT
9VDC
+-
RIGHT OUTLEFT OUT
INPUT
High impedance mono or TRS
stereo input (internal jumper
configurable - see full user
manual for details).
ADD EVEN MORE CONTROL & FLEXIBILITY
Connect the optional Strymon Miniswitch to quickly access a saved favorite setting or
toggle slow/fast rotary speeds remotely. See the full user manual at strymon.net/support
for more details.
POWER
Use an adapter with the
following rating: 9VDC center
negative. 250mA minimum.
EXP
Connect a standard TRS
expression pedal for
continuous control over any
selectable knob parameter.
To select the knob controlled
by the expression pedal, hold
the SLOW/FAST footswitch
during power up. The first
knob turned is then then
assigned to the expression
pedal.
STEREO OUTPUTS
Stereo outputs. Use LEFT
OUT for mono signal output.

SECONDARY FUNCTIONS & SAMPLE SETTINGS
PREAMP
DRIVE
FAST ROTOR
SPEED
BYPASSSLOW/FAST
®
rotary
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
(LEVEL)
(SLOW ROTOR
SPEED)
(CAB
DIRECTION)
PREAMP
DRIVE
FAST ROTOR
SPEED
BYPASSSLOW/FAST
®
rotary
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
(LEVEL)
(SLOW ROTOR
SPEED)
(CAB
DIRECTION)
PREAMP
DRIVE
FAST ROTOR
SPEED
BYPASSSLOW/FAST
®
rotary
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
(LEVEL)
(SLOW ROTOR
SPEED)
(CAB
DIRECTION)
MELLOWED OUT ROTARY BRAKE FAT HARMONICS
NOTE: Secondary functions are accessed by holding both footswitches while turning control knobs.
PREAMP
DRIVE
FAST ROTOR
SPEED
BYPASSSLOW/FAST
®
rotary
MIC DISTANCE
HORN LEVEL
( ACCELERATION )
( SLOW ROTOR
SPEED )
( CAB
DIRECTION )
( LEVEL )
REARFRONT
CAB DIRECTION Changes the position of the cabinet relative to the
microphones.
ACCELERATION Controls how quickly the rotors transition from Fast
to Slow and from Slow to Fast speed.
SLOW ROTOR SPEED Controls the speed of the rotors in SLOW
speed.
LEVEL Controls the +/- 6dB boost or cut when the pedal is engaged.

REV B
strymon.net