Studio Tools Trolley User manual

Trolley
Assembly instructions
A
In case of any uncertainties or difficulty in understanding, please contact us before you start the assembly.
Diese Montageanleitung ist in Englisch verfasst. Falls Sie etwas nicht verstehen oder Unklarheiten bestehen,
kontaktieren Sie uns bitte bevor Sie mit der Montage beginnen.
Base panel (1x)
Side frames (2x)
Cross struts (4x)
Castors with brakes (2x) Felt sticky tape (2x)
Quick Connectors (12x)
Castors without brakes (2x)
G1
G2
G3
Scope of delivery
B C
D E F
G1, G2 & G3

!To prevent damage, assemble the object on a soft surface.
Quick Connector tips
8x G14x G2
2x B Side frames
8x G2
4x A Cross struts
8x G3
A + B See Quick
Connector tips
* *
G2
Optimum positioning of the steel dowel (G1).
Incorrect positioning. Loosen steel dowel (G1) until the holes are
aligned. The steel dowel (G1) does not have to be tightly screwed into
the preassembled steel socket (H), it can be loosened by up to a half
rotation.
A
B
B
A
Assembly of support handle
2 Trolley | Assembly instructions
Screw the steel dowel (G1) into the preassembled steel socket (H) as far as it will
go.
Push the housing (G2) into the hole in the wood. Make sure that the housing
(G2) is positioned in such a way that the hole in the housing (G2) is correctly
aligned and the two workpieces (G1 + G2) can be plugged together.
Screw the grub screw (G3) into the housing (G2).
If for any reason the positioning of the steel dowel (G1) is still incorrect or
too loose, the preassembled steel socket (H) can be loosened or tightened
accordingly.
G2 + G3
G1 + G2
G1 + G2
G1 + G2
G1 + G2
G2
G1 G1
G1
G1
G2
G2
H
G1
G3
G2
I

2x F
A + F
4x G1
CBase panel
!To prevent damage, assemble the object on a soft surface.
4x G3
B + C *See Quick
Connector tips
G1
G1 C
B
C
AA
F
Attach support handle to base
panel
Attach felt sticky tape to cross
struts
3 Trolley | Assembly instructions
G1 + G2
G1 + G2
G1 + G2
G1 + G2
G1
G1
E
E
D
G1
G1
G2 + G3
D
II III