Nags head hammocks Stowaway User manual

STOWAWAY BENCH

INSTRUCTIONS

• BACK ASSEMBLY

• FRONT PANEL

• REAR PANEL

• BOTTOM PANEL

• SEAT LID

• HARDWARE PACK

• LEFT LEG ASSEMBLY

• RIGHT LEG ASSEMBLY

• RUBBER MALLET

• PHILLIPS HEAD SCREWDRIVER

• DRILL

NOTE: TWO PEOPLE ARE RECOMMENDED FOR ASSEMBLY

MUST BE ASSEMBLED ON A FLAT SURFACE TO

KEEP PANELS UPRIGHT WHEN ASSEMBLING

(4) 1.5” BARREL BOLTS

(1) ALLEN WRENCH

HARDWARE PACK

BENCH PARTS BOX 1

BENCH PARTS BOX 2

SUGGESTED TOOLS

STEP 1. Slide the Front Panel into the slot on the Front Leg and the

Rear Panel into the slot on the Rear Leg, then use (4) 3” Screws to

fasten the panels to the Left Leg Assembly.

ASSEMBLY

LEFT ARMLEFT ARM

ASSEMBLYASSEMBLY

3” SCREW3” SCREW

REAR PANELREAR PANEL

FRONT PANELFRONT PANEL

(1) SQUARE-HEAD BIT

(10) 3” SCREWS

STEP 2. With the Front/Rear Panels fastened slide the Bottom Panel

into the frame, no fastening required.

STEP 4. Slot the Back Assembly into the Rear Leg and use (2) 1.5”

Barrel Bolts to fasten it to the Rear Leg.

STEP 3. Slide the seat on top of the Front/Rear Panel and into the

slot on the Rear Leg, use (1) 3” Screw to fasten the seat to the Leg

Assembly.

STEP 5. Use the Right Leg Assembly to cap o the other end. Make

sure all parts are slotted correctly then use (2) 1.5” Barrel Bolts for

the Back Assembly and (5) 3” Screws for the seat and panels.

ASSEMBLY

Congratulations on purchasing this Durawood Stowaway Bench. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 252-758-0641.

RESIDENTIAL WARRANTY - This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting, cracking, peeling,

chipping, insect infestation or other damage should ever occur, The Hammock Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any