Studymate SMKIDPLAYT User manual

ASSEMBLY INSTRUCTIONS
SMKIDPLAYT
KIDS PLAY TABLE
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
1/6

Officeworks Superstores Pty Ltd. I 236-262 East Boundary Road I East Bentleigh I 3165 I AUSTRALIA
Please check you have all hardware before assembling.
If you think you are missing any hardware please contact the store of purchase.
Please ensure you have the name of the item and hardware part required and quantity.
Please retain your receipt for proof of purchase to validate warranty. Enjoy your new purchase.
At least every 4 months, check all bolts, screws and knobs to be sure they are tight.
If parts are missing, broken, damaged or worn, stop use of the product until repairs are made,
using factory authorized parts.
Failure to follow these warnings could result in serious injury.
WARNING
.
.
.
.
Loosely tighten all hardware until all parts are in place, and then firmly tighten all hardware
before use.
Do not use this table unless all bolts, screws and knobs are firmly secured.
2/6
.
.
.
.
.
Recommend 2 Adults to Assemble
Assemble Item On a Clean Flat Surface

3/5
A B C D
x8pcs
E
x1pc
1 2 3
x1pc x4pcs
PARTS LIST
HARDWARE LIST
x4pcs
x8pcs
FG
x8pcs x4pcs
x1pc x4pcs
o
6x40mm
o
6x12mm
M4
M6
o
16x1mm
A
x4pcs
G
x4pcs
Step 1
A
A
G
G
x4
2

4/6
Step 2
3
3
2
ABC
BC
x8pcs x8pcs
A
x4pcs
A
BC
E
F
x4
2.
3
3
2
BC
BC
E
F
x4
1.
Attention: Loosely attach nut C during this step for easier
assembly on the following steps.

5/6
Step 3
1.
2.
lock 100%
x8
E
D
DD
D
D
D
x4pcs
1
Step 4
C
C
x8

6/6
Step 5
CAUTION: This product is intended to hold the maximum weight indicated. Exceeding the
maximum weight will result in instability and may cause injury.
lf you’d like to know more about Officeworks’ furniture product, please visit our website.www.offceworks.com.au
Thank you for purchasing our product! Please retain your receipt to validate warranty
1.Assembly should be done by two adults.
2.During assembly children should be kept away from the product due to possible risk of injury.
MAXIMUM WEIGHT CAPACITY
NOTE: 40kg maximum
weight capacity
C
Step 6
If the table is not level after assembly, loosen nut C and place table on level ground.
Ensure all legs are in proper contact with the ground and tighten nut C.