Sub-Zero 700BR User manual

Integrated refrigeration can be used
anywhere in the home. It merges
seamlessly into the décor, with no visible
hinges or grilles. Model 700BR is a 27"
wide base unit with refrigerator storage in
both drawers. This model is Energy Star
Qualified for energy efficiency.
Model 700BR
Integrated Refrigerator Drawers
Features
Integrated design blends invisibly into
custom cabinetry
Energy Star qualified
Microprocessor offers precise temperature
control
Electronic digital controls
Flat-to-the-ceiling bright interior lighting
Removable, clear-view crisper cover can
be used in either drawer
Open drawer alarm
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Accessories
Stainless steel drawer panels with
tubular handles available in three finishes
(see chart above for specifics)
Polished chrome handles for custom
panel applications
Crisper cover with lid
Dozen egg container with lid
Dual installation heater kit
Accessories are available through your Sub-Zero
dealer. To obtain local dealer information, visit the
Locator section of our website, subzero.com.
Interior Features
Refrigerator
1 Temperature Zone
2 Storage Drawers
Removable Crisper Cover
2 Removable Drawer Dividers
Classic CarbonPlatinum
Model 700BR
Design Integrated
Stainless Steel Panels Classic Platinum Carbon
Model 700BR

Installation Notes
Stainless steel drawer front panels with
handles are available as accessories. These
panels are not installed at the factory.
Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com.
Unit dimensions may vary by ±
1
/ 8 ".
Specifications
Overall Width 27"
Overall Height 341/2"
Overall Depth 24"
Drawer Clearance 191/2"
Refrigerator Capacity 5.3 cu ft
Opening Width 27"
Opening Height 341/2"
Opening Depth 25"*
Electrical Requirements 115 V AC, 60 Hz
15 amp dedicated circuit
Annual Energy Usage $31**
Shipping Weight 190 lbs
*Depth is 24" from the front of the unit to its back.
Your design may necessitate moving the unit
back, or cabinets forward to achieve a flush fit.
This will require a minimum opening depth of 25".
**Based on 9.06 cents per kilowatt hour.
ANTI-TIP
BRACKET*
*PLACEMENT OF THE
ANTI-TIP BRACKET
SHOULD BE 24" (610)
FROM THE FRONT OF THE
UNIT WITHOUT PANELS
TO THE BACK OF THE
ANTI-TIP BRACKET.
41/2"
(114)
21/2" (64)
151/2" (394)
1/4"
(6)
13" (330)
ANTI-TIP
BRACKET
LOCATE ELECTRICAL WITHIN
SHADED AREA – ORIENT GROUND
PRONG TO RIGHT AS SHOWN
25"
(635)
27"
(686)
341/2"
(876)
25"
(635)
11/2"
(38)
131/2"
(343)
TOP VIEW
SIDE VIEWFRONT VIEW
ANTI-TIP
BRACKET
NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO
PREVENT UNIT FROM TIPPING FORWARD
Installation Specifications
Overall Dimensions
Model 700BR
Integrated Refrigerator Drawers
DRAWER
MOUNTING DETAIL
34
1
/ 2 "*
(876)
93/4"
(248)
4"
(102)
FRONT VIEW SIDE VIEW
3/8"
(10)
131/4"
(337)
1/2"
(13)
101/4"
(260)
203/8"
(518)
27"
(686)
24"
(610)
(UNIT DIMENSION) (UNIT DIMENSION)
*
1/2"
(13) +
_ADJUSTMENT IN LEVELING LEGS
*
DRAWER PANEL THICKNESS NOT INCLUDED
DRAWER CLOSED
191/2"*
(495)
24"
(610)
257/8" (657)
TOP VIEW
Dimensions in parentheses are in
millimeters unless otherwise specified.