Sub-Zero 600 Series BI-48SD User manual

Side-by-side Model BI-48SD offers
maximum refrigeration capacity along
with an ice and water dispenser through
the refrigerator door. Sub-Zero dual refrig-
eration along with new air purification and
water filtration systems guard the fresh-
ness of your food and water like nothing
before. Framed, overlay/flush inset and
stainless steel models are available. New
flush inset installation allows the unit to
sit flush with surrounding cabinetry.
New Built-In Model BI-48SD
Side-by-Side with Dispenser
Interior Features
Refrigerator
18.7 cu ft Capacity
Air Purification System
4 Adjustable Glass Shelves
1 Stationary Glass Shelf
1 High-Humidity Drawer with Divider
2 Storage Drawers with Divider
3 Adjustable Door Shelves
2 Stationary Door Shelves
Adjustable Dairy Compartment
Freezer
9.6 cu ft Capacity
Water Filtration System
Automatic Ice Maker with Dispenser
2 Adjustable Wire Shelves
1 Stationary Solid Shelf
3 Storage Drawers
5 Adjustable Door Shelves
Stainless steel Model BI-48SD shown with tubular handles.
Accessories
Louvered, panel and stainless steel grilles
for 83", 84" and 88" finished heights
Stainless steel front panels for framed and
flush inset applications with stainless steel
finish and handle options
Side panels in classic stainless steel and
white
Stainless steel tubular, pro or curved
handles and full-length extended handles
Dozen egg container with lid
90° door stop kit
Accessories are available through your Sub-Zero
dealer. To obtain local dealer information, visit the
Showroom Locator section of our website,
subzero.com.
Features
Framed, overlay/flush inset and
stainless steel design applications
Flush inset installation option allows unit
to sit flush with surrounding cabinetry
Through-the-door ice and water dispenser
Air purification system
Water filtration system
Dual refrigeration system
Flip-up grille for easy access to condenser
Door shelves are adjustable in one-inch
increments
Crisper and deli drawers form a special
low-temperature zone
Informational freshness cards inside unit
Max ice feature to increase rate of ice
production for a 24-hour period
Exceeds tough Department of Energy
standards
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Flip-Up Grille Air Purification System
Model Options BI-48SD/F BI-48SD/O BI-48SD/S/TH BI-48SD/S/PH BI-48SD/S/CH
Design Framed Overlay/Flush Inset Stainless Stainless Stainless
Grille Louvered Panel Stainless Stainless Stainless
Handle Full-Length * Tubular Pro Curved
*Handle not included to allow for design flexibility.

751/2"
(1918)
7"
(178)
6"
(152)
E
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
1/2"
(13)
18" (457)*6"
(152)
24" (610)
OPENING
DEPTH
263/16"
(665)
FLUSH INSET
DEPTH
SHUT-OFF
VALVE
OUTLINE
OF FLUSH INSET
APPLICATION WITH
3/4"(19) PANEL
18"
(457)
W
LOCATE WATER SUPPLY
WITHIN SHADED AREA
6"
(152)
FRONT VIEWSIDE VIEW
TOP VIEW
833/4"
(2127)
OPENING
HEIGHT
84"
(2134)
FLUSH
INSET
HEIGHT
1/4" (6) 23/16"
(56)**
3" (76)
471/2" (1206)
OPENING WIDTH
50" (1270)
FLUSH INSET WIDTH
11/4"
(32)
11/4"
(32)
23/16"
(56)**
24" (610)
OPENING
DEPTH
263/16" (665)
FLUSH INSET
DEPTH
*ANTI-TIP BRACKET MUST NOT
INTERFERE WITH WATER LINE.
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
**ASSUMES 3/4"(19) PANEL
THICKNESS.
EXTEND WATER LINE APPROX
36" (914) FROM BACK WALL.
WATER LINE
1/4"
(6)
11/4"
(32)
FLUSH INSET
DETAIL
23/16"
(56) 24" (610)
OPENING
DEPTH
Installation Notes
Built-In models may be used in a standard
installation or in a flush inset installation which
allows the unit to be flush with surrounding
cabinetry.
Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com.
Specifications
Overall Dimensions 48"W x 84"H x 24"D
Door Clearance 30"
Opening Width 471/2"
Flush Inset Width 50"
Opening Height 833/4"
Flush Inset Height 84"
Opening Depth 24"
Flush Inset Depth 263/16"
Electrical Requirements 115 V AC, 60 Hz
15 amp circuit
Plumbing Requirements 1/4" OD copper line
30–100 psi
Shipping Weight 610–656 lbs
751/2"
(1918)
7"
(178)
6"
(152)
E
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
18"
(457)
W
LOCATE WATER SUPPLY
WITHIN SHADED AREA
6"
(152)
FRONT VIEWSIDE VIEW
833/4"
(2127)
OPENING
HEIGHT
471/2" (1206)
OPENING WIDTH
3" (76)
24" (610)
OPENING
DEPTH
1/2"
(13)
18" (457)*6"
(152)
24" (610)
OPENING
DEPTH
SHUT-OFF
VALVE
OUTLINE OF
FRAMED, OVERLAY
OR STAINLESS
STEEL MODEL
TOP VIEW
*ANTI-TIP BRACKET MUST NOT
INTERFERE WITH WATER LINE.
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
EXTEND WATER LINE APPROX
36" (914) FROM BACK WALL.
WATER LINE
Flush Inset Installation
*Anti-tip bracket must not interfere
with water line. Extend water line
approximately 36" from back wall.
**Dimensions based on
3
/ 4 " (19)
panels.
Built-In Model BI-48SD Installation Specifications
Standard Installation
*Anti-tip bracket must not interfere
with water line. Extend water line
approximately 36" from back wall.
Dimensions in parentheses are in
millimeters unless otherwise specified.
Unit dimensions
may vary by
±
1
/ 8 " (3).
Overall Dimensions
48"
(1219)
84"
(2134)
24"
(610)
237/8"
(606)
BEHIND
FRAME
48"
(1219)
30"
(762)
471/4"
(1200)