Summit Inflexion User manual

PLUS MODEL ONLY
Chair Height Adjustment. The overall height of the chair is adjusted by lifting the
front of three levers located below the seat on the right hand side. Lift your weight
o the chair allowing it to rise and release the lever at the desired height. To lower
simply lift the lever.
Back Recline Adjustment. The back angle is independently adjusted by lifting the
rear of the three levers located below the seat on the right-hand side. It can be
locked at the required angle by pushing the lever down or left unlocked to follow the
user’s movements.
Seat & Back Angle Adjustment. The combined seat and back angle can be adjusted
by lifting the middle of the three levers located below the seat on the right-hand
side. The chair can be locked at the required angle by pushing the lever down or it
can be left unlocked to follow your movements. The tension of the recline can be
adjusted by turning the knob located under the front of the seat.
Back Height Adjustment. The back height is adjusted by lifting the back up a step at
a time for correct positioning of the lumbar support. When the back reaches the top
of its travel it will then drop back to the start position.
Inflatable Lumbar Support. The inflatable lumbar support is adjusted using the hand
bulb hanging under the left-hand side of the seat. Squeeze the bulb to inflate and
press the button on the bulb to deflate.
Arm Height Adjustment. The height adjustable arms have a lever located under
the outside edge of the arm pad. Press this in, set the arm at the desired height and
release the lever to lock.
Headrest Adjustment. The headrest can easily be adjusted for height, angle and reach
to provide tailored support to the neck and head. Just lift and rotate.
Inflexion & Inflexion Plus
Operating instructions,
care guide and warranty
User instructions
ALL ADJUSTMENTS SHOULD BE MADE WHILST SEATED
Inflexion instructions summit at home.indd 1Inflexion instructions summit at home.indd 1 16/12/2020 13:2516/12/2020 13:25

Frequent movement is
important, so try small
variations to your working
position whilst still sitting
upright to maintain an S
shaped spinal curve.
Adjust your seat height and
angle so your feet are flat on the
floor, your hips slightly higher
than your knees and your eyeline
is level with the top of the screen.
If necessary use a footrest or
adjust the height of the screen.
Need any help? / 01225 777 844 / [e-mail] / summitathome.co.uk /
Using the chair
ADVICE FOR HEALTHY SITTING
5
years
Vacuum regularly. Wipe clean with a damp cloth or shampoo
using proprietary upholstery shampoo
Care instructions
5
years
The fabric used on this product is match resistant and meets the
requirements of BS5852 ignition source 0 and 1 for domestic upholstery.
The foam used within this product is Combustion Modified (CMHR) and
complies with The Furniture and Furnishings (Fire) (Safety) Regulations.
Fire Retardancy
5
years This chair is structurally guaranteed for 5 years whilst in 8 hour per day
use. This excludes damage or failure caused by misuse. It also excludes
fair wear and tear. This chair is suitable for users up to 150kg.
Warranty
For better posture, avoid
slouching back in your chair or
leaning forward over your desk.
Inflexion instructions summit at home.indd 2Inflexion instructions summit at home.indd 2 16/12/2020 13:2516/12/2020 13:25

Get Comfortable
Welcome to your new chair!
To help you be the most comfortable, we’ve put together this guide for all the
operating functions and comfort wizardry this chair can offer. Work through each
setting until you are at your optimum comfort and the chair is set up perfectly for you.
We really want you to be comfortable!
Inexion
Operating Functions
6
Back angle
adjustment
Armrest height
adjustment
Seat recline
tension adjustment
Inatable
lumber pump
4
5
1
2
Seat angle
adjustment
Chair height
adjustment
3

Adjustment options
A photographic guide to Inexion adjustment functions. These functions enable you
to customise your chair to your requirements.
Back Angle Adjustment
Lift the lever to adjust the
angle of the back support.
Inatable Lumber Support
Pump the bulb to inate the lumbar
support. Press the button to deate.
Seat Angle Adjustment
Lift the lever to adjust the recline
angle of the seat.
Armrest Height Adjuster Button
Press the button under the edge
of the arm pad to adjust the height
of the armrests.
1
4
2
5
3
6
Chair Height Adjustment
Lift the lever to adjust the height
of the chair.
Seat Recline Tension Adjustment
Rotate the knob to adjust the tension
of the seat recline.
7Back Height Adjustment
Lift the back up a step at a time. At the
highest point the back will drop back
to the start position.
Chairology help
If you have any queries on how
to use your chair, please contact
our customer service team who
will be more-than-happy to help.
Email - [email protected]
Telephone - 01225 777844
Customer service - Monday-Thursday
8.30am - 5pm & Friday 8.30am - 3pm
Website - www.summitathome.co.uk