Sunblaster LED STRIP LIGHTS User manual

We appreciate you choosing our SunBlaster
LED Strip Light for your growing application.
SunBlaster LED Strip Lights are designed for
maximum performance, economy and longevity,
while providing the best possible lighting for all
Indoor Horticultural applications.
Full spectrum 6400k lighting driven by
advanced LED technology.
Ideal for propagation and growth.
Key Benets
•Long life, high performance LED
•High Power Factor - Extremely ecient
•Sleek, rugged aluminum housing
•Self-Cooling Technology – Low heat
•Dust and splash resistant
•Zero Mercury content
•Silent operation
SunBlaster warrants the
LED Strip Light to be
free from defects in
materials and
workmanship for a
period of One Year.
Your original sales
receipt which will serve as your proof of
purchase and start date of your warranty.
SunBlaster will at our discretion, repair or
replace the LED covered under this warranty if it
is returned to the original place of purchase.
Misuse, abuse, failure to follow instructions or
operating in any fashion other than it’s intended
use is not covered, and will void this warranty.
SunBlaster’s warranty liability extends only to
the replacement cost of the product.
SunBlaster will not be liable for any
consequential, indirect, or incidental damages
of any kind.
For additional information regarding your
warranty and operating instructions please visit
us online.
www.sunblasterlighting.com
LED
STRIP LIGHTS
OWNER’S GUIDE
Full Spectrum Horticultural Lighting
Ideal for propagation and growth.

INSIDE THE BOX
We have included all the pieces you will need to
get you up and growing quickly.
Your kit includes:
1. LED Strip Light
2. 6’ Power cord with rocker on/o switch
3. Link cord 14”
4. 2 ush mount clips
5. 2 hanging clips
Operating your LED Strip Light
•Ensure adequate airow around your lighting
at all times.
•Use 18 gauge AWG extension cords only.
•You can interconnect up to 8 LED Strip Lights
if needed via the linking cords provided.
•Do not expose to water, drip or spray lines.
•Do not connect more than 8 units together
into one outlet.
•Do not force connections, they go one way
only, make sure they are in correctly.
•Do not look directly into lights while running.
Maintaining your LED
SunBlaster LED Strip Lights are virtually
maintenance free. You may wish to clear the lens
cover of any accumulated dust or perhaps other
debris. Unplug your lighting and use a clean dry or
slightly damp micro cloth to clean your xture and
the protective lens.
GET STARTED
Choose how you want to support your lighting:
We have included two types out mounting or
suspension clips in your kit. They snap on to the
top of the lighting xture.
LED Strip Light is included, it is a self contained
unit with no user serviceable parts.
6” Power cord with on/o switch is included with
your LED, use this to connect your LED to your
power outlet or timer if you are wanting to set the
timing of your lights to match dierent growing
cycles. Typical times on are 12/16/18 hours.
Flush Mount Clips are included to ax your LED
to a variety of locations where you might choose
to mount your lighting. Under cabinet is a typical
location. You can mount your lighting anywhere
you want with these handy clips.
Hanging Clips are also included, these clips are
very popular for growers who want to suspend
their lighting above their growing medium. With
the addition of “S” hooks, they can easy be
suspended in a variety of applications such the
very popular bakers racks for propagation and
growing of micro greens or cloning.
14” Link Cord is included, you can interconnect
up to 8 lighting xtures, daisy chaining, and run
them from a single power cord. This can be really
handy in many growing applications. If you nd
you need extra length we do have a 24” Link cord
available that is sold separately.
Power & Linking Connectors
Ensure you insert the correct end
of the power cord or linking cord
into the LED, they only go one way.
OPERATING TIPS
If you are using hanging clips, clip one hanging
clip to both ends of the LED Strip Light and
suspend the light in the desired position.
If you are using ush mounting clips, screw the
mounting clips to the mounting surface and clip
the LED Strip Light into the mounting clips. Be
sure to choose an appropriate length screw.
Connect the power cord to the male end of the
LED Strip Light.
Make sure the cords are rmly pushed into place
and do not feel loose. Use the switch on the cord
to turn the lights ON or OFF, or utilize a timer.
Link It cords can be used to connect up to 8
lights to a single power cord. Connect the female
end of the LED Strip Light to the male end of the
next light, and so on.
Additional Accessories
0900295
14” Link Cord - Linking cord
0900239
24” Link Cord - Linking cord
0900240
36” Link Cord - Coming soon!
SunBlaster LED Strip Lights - Lengths
0900700
12" SunBlaster LED - 12W
0900701
18" SunBlaster LED - 18W
0900702
2' SunBlaster LED - 24W
0900703
3' SunBlaster LED - 36W
0900704
4' SunBlaster LED - 48W
Propagation Accessories
1400232
1020 7” NanoDome
1400220
1020 Double Thick Tray
1400235
1020 Quad Thick Tray