Sunix EZG1200 User manual
2
User’s Manual
Copyright
Copyright© 2020 SUNIX Co., Ltd. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any
language, or transmitted in any from or by any means, photocopying, manual, or otherwise, without prior
written permission from SUNIX Co., Ltd.
Disclaimer
SUNIX Co., Ltd. Shall not be liable for any incidental or consequential damages resulting from the
performance or use of this equipment.
SUNIX Co., Ltd. Makes no representations or warranties regarding the contents of this manual. Information
in this manual has been carefully checked for reliability; however, no guarantee is given as to the correctness
of this content. In the interest of continued product improvement, this company reserves the right to revise
the manual or include change in the specifications of the product described within it at any time without
notice and without obligation to notify any person of such revision or changes. The information contained in
this manual is provided for general use by the customers.
Trademarks
SUNIX is a registered trademark of SUNIX Co., Ltd.
Other registered marks used herein are for identification purposes only and may be trademarks of their
respective owners.
Safety Information
1. Keep this User’s Manual for future reference.
2. Always read the safety information carefully.
3. Keep this equipment away from direct sunlight, or in humid or damp places.
4. Do not place this equipment in an unstable position, or on vibrating surface before setting it up.
5. Do not use or place this equipment near magnetic fields, televisions, or radios to avoid electronic interface
that affects device performance.
6. Do not attempt to disassemble or repair the equipment or the warranty would be useless.
7. To avoid damaging your system and equipment, please make sure that your computer is off before you
install the product.
3
Regulatory Compliance
FCC Class B Declaration
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense. Modifications not authorized by the
manufacturer may void users authority to operate this device.
This equipment meets the requirements of EC Electromagnetic Compatibility Directive
(2004/108/EC)
For EU (European Union) member users: According to the WEEE (Waste electrical
and electronic equipment) Directive, do not dispose of this product as household
waste or commercial waste. Waste electrical and electronic equipment should be
appropriately collected and recycled as required by practices established for your
country. For information on recycling of this product, please contact your local authorities, your household
waste disposal service or the shop where you purchased the product.
4
Table of Contents
1. Introduction .................................................................................................................................5
1.1 Overview ................................................................................................................................................. 6
1.2 Product Features..................................................................................................................................... 6
1.3 Product Specifications............................................................................................................................. 7
2. Installation ...................................................................................................................................8
2.1 LED display .............................................................................................................................................. 9
2.2 Environmental configurations (Default).................................................................................................. 9
2.3 Web operations..................................................................................................................................... 10
2.3.1 Home.............................................................................................................................................. 10
2.3.2 System settings.............................................................................................................................. 11
2.3.3 Device Port connection settings .................................................................................................... 14
2.3.4 Interface settings ........................................................................................................................... 16
2.3.5 IoT Central Device Template.......................................................................................................... 19
2.3.6 System update ............................................................................................................................... 20
3. Appendix .....................................................................................................................................21
3.1 Contact Information.............................................................................................................................. 21
5
1. Introduction
Welcome to use SUNIX Azure IoT Central Gateway. It is designed to work with Microsoft
Azure IoT Central. The customer leverage SUNIX communication protocol for establishing
direct connections with Azure IoT cloud
The following topics covered in this chapter:
1.1 Overview
1.2 Product Features
1.3 Product Specifications
6
1.1 Overview
The EZG1200 Azure IoT Central Gateway is designed to work with Microsoft Azure IoT
Central.
The customer leverage SUNIX communication protocol for establishing direct connections
with Azure IoT Central.
With Ethernet extensions, users can automate in an extremely easy way, allowing
companies to quickly introduce the Internet of Things to become more competitive.
The EZG1200 Azure IoT Central Gateway has the function of automatically enumerating
serial, digital and analogue IO devices, which can quickly search for terminal devices, thus
achieving plug-and-play functionality, allowing users to greatly improve the convenience of
system development.
1.2 Product Features
◼Built-in SUNIX EAZInet Technology for establishing direct connections with Azure IoT
Central.
◼Built-in dual 10/100 Ethernet ports for Ethernet cascading capability.
◼Support daisy chain topology, expand more fast and flexible.
◼Supports automatic enumeration mechanism for rear-end devices, making network
connection easier.
◼Support Wall Mounting & DIN-rail Mounting Installation.
7
1.3 Product Specifications
LAN
Ethernet: 2-port 10/100 Mbps RJ45 ports
Protection: 1.5 KV magnetic isolation
Protocols: SUNIX EAZInet
Physical Characteristics
Dimensions: 72.1 x 108 x 33.9 mm
(2.83 x 4.25 x 1.33 in)
Weight: 118 g
Mounting: DIN rail or wall
Power Requirements
Input Voltage: 12 to 24 VDC
Power Consumption: 1.6W @ 24 VDC
Connector: 2 PIN Terminal Block
Environmental Limits
Operating Temperature:
0 to 60°C (32 to 140°F)
Storage Temperature:
-10 to 70°C (-14 to 158°F)
Operation Humidity:
5 to 95% (non-condensing)
Standards and Certifications
•
EMC:
EN 55032, EN 55035
•
EMI:
FCC Part 15B Class B
•
EMS:
IEC 61000-4-2
•
ESD:
Contact: 4 kV; Air: 8 kV
8
2. Installation
This chapter includes information about hardware installation for SUNIX Azure IoT Central
Gateway.
The following topics are covered:
▪2.1 LED display
▪2.2 Environmental configurations (Default)
▪2.3 Web operations
2.3.1 Home
2.3.2 System settings
2.3.3 Device Port connection settings
2.3.4 Interface settings
2.3.5 IoT Central Device Template
2.3.6 System update
9
2.1 LED display
Power LED
Green
Power status
Fault
Off
Normal
On
Connection LED
Green
Status 1: Startup
status
Starting up
Off
Startup complete
On
Status 2: Central
connectivity
Connecting
Blinking
Connected
On
2.2 Environmental configurations (Default)
IP address: 192.168.111.254
Login account and password: admin/admin
10
2.3 Web operations
2.3.1 Home
1. Menu
2. Basic Gateway information (User Name, Model, Version)
3. Solution Kit applied and IoT Central connection status (Connected or Disconnect)
4. Guide and Support. Links to IoT Central and SUNIX webpage, respectively.
5. List of DPs connected to Gateway and connection status (Connected or Disconnect)
Table of contents
