Sunjoy L-GZ1033PST User manual

Assembly Instructions
10x12 Woven Post Gazebo
Model: L-GZ1033PST
SKU: 2721825

Congratulations on your purchase of our SUNJOY 10x12 Woven Post Gazebo.
Our clear, easy to follow, step-by-step instructions will guide you through the
assembly process from start to finish.
IMPORTANT:
1. When installing and assembling your gazebo, it is recommended that two or more
adults are involved.
2. Do not use the gazebo during an electrical storm, as there is a remote chance of
getting struck by lightning.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious
injury, possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as possible
damage will occur to the structure.
5. Do not use lanterns that contain open flames.
6. This package contains small items and plastic bags that should be kept away from
children.
7. Ensure that all connectors & poles are firmly secured in position fully. It is
important to do so before use so as to avoid collapsing or damage to the item, which
could result in injury.
8. KEEP ALL FLAME AWAY FROM THIS SHELTER FABRIC. The fabric may burn
if it is exposed to prolonged contact with a flame source. The application of any
foreign substance to the fabric may render the flame-resistant properties ineffective.
USE & CARE:
1. This gazebo is not a permanent structure. The canopy top should never be left on
during periods of extended or heavy rain nor any inclement weather where high
winds or wind gusts can occur. If left up, damage to the gazebo and surroundings
can occur.
2. Do not repack your gazebo until completely dry.
3. Steel components for garden accessories and furniture are treated with rust
inhibiting paint that protects them from rust. However, due to the nature of steel,
surface oxidation (rusting) will occur if this protective coating is scratched. This is a
natural process. To minimize this condition, it is recommended that care be taken
when assembling and handling the product in order to prevent the paint from being
scratched. Surface rust can be removed easily using a very light application of
common cooking oil. If surface oxidation (rusting) occurs and no measures are taken
to correct it, the oxidation may start dripping onto the deck or patio, which may cause
damaging stains that may be difficult to remove.

Post
A
4
Long left beam
B1
2
Long right beam
B2
2
Short left beam
C1
2
Short right
beam
C2
2
Beam up
connector
D1
4
Beam down
connector
D2
4
Decorative
ferrule
E
4
Arch support
F
8
Long netting
pipe
G
4
Short netting
pipe
H
4
Oblique beam
down side
connector
I
4
Middle beam
down side
connector
J
4
Oblique beam
K
4
Oblique beam
down side
connector
L
4
Long middle
beam
M
2
Short middle
beam
N
2
Big top
connector
O
1
Small top
oblique beam
P
4
Parts List

Small top
connector
Q
1
Stake cover
R
4
Stake plate
S
4
Hook
T
1
Small canopy
U
1
Big canopy
V
1
Netting
W
1
Hardware Pack 1
AA
M6*15 Flat bolt
16 PCS
BB
M6 Washer
128 PCS
CC
M6*25 Hex bolt
48 PCS
DD
M6*70 Hex bolt
16 PCS
EE
M6 Nut
16 PCS
FF
M6*40 Hex bolt
32 PCS
Z
M6 Wrench
1 PCS

Fig.1: Insert the Stake cover (R) into the post (A) from bottom, then use bolt (AA) and washer
(BB) to fasten it with post.
Fig.2: Use bolt (CC) and washer (BB) to fasten the oblique beam down connector (I) on the
post (A).
Fig.3：Use bolt (DD), washer (BB) and nut (EE) to fasten the beam (B1, B2, C1, C2) through
beam connectors (D1, D2).

Fig.4：Use bolt (CC) and washer (BB) to fasten the assembled beam (B1, B2, C1, C2) on the up
side of post (A).
Fig.5-1：Use bolt (CC) and washer (BB) to fasten the middle beam down connector (J) with
long netting pipe (H, G) on the beam.
Fig.5-2: Use bolt (CC) and washer (BB) to fasten the long/short netting pipe (H, G) on the
Beam (B1, B2, C1, C2)
Fig.6：Firstly cover the decorative ferrule (E) from the bottom to up side on the connecting
part of beam. Then use bolt (CC) and washer (BB) to fasten it on the beam.
Fig.7-1：Use bolt (FF) and washer (BB) to fasten the arch support on the post (A).
Fig.7-2：Use bolt (FF) and washer (BB) to fasten the other side of arch support on the beam
(B1, B2, C1, C2).
Hardware Pack 2
BB
M6 Washer
16 PCS
EE
M6 Nut
8 PCS
GG
M6*40 Flat bolt
8 PCS

Fig.8：Attach the oblique beam (K) with down pipe (L) as pic. shows.
Fig.9：Insert the up side of assembled oblique beam (K) into the tube of big top connector (O).
Fig.10：Use bolt (GG), washer (BB) and nut (EE) to fasten the down side pipe (L) on the oblique
beam down side connector (I).
Fig.11：Insert the middle beam (N) into the big top connector (O), then attach the hook (T) on the
connector.
Fig.12：Use bolt (GG), washer (BB) and nut (EE) to fasten middle beam downside pipe (N) on the
connector (J). then cover the big canopy (V) on the top, but do not unfold it.
Fig.13：See as the pic. fix the small top oblique beam (P) with small top connector (Q).
Fig.14：Attach the assembled small top to pipe of big top oblique beam (K) through small top
oblique beam (P).
Hardware Pack 3
HH
Ring
52 PCS
II
￠8*180 Stake
16 PCS

Fig.15：Cover the small canopy (U) on the top, then button up the 4 sides of canopy on the oblique
beam (P).
Fig.16: Unfold the big canopy (V), button up the 4 sides on the oblique beam downside pipe (L).
Fig.17：Use rings (HH) to hook the netting on the netting pipe (H, G).
Fig.18：Use stake (II) to fix the assembled gazebo on the lawn.
Your 10x12 woven post gazebo is now ready for use.
Please do not return this product to the store. For technical assistance on assembly or
replacement parts call Sunjoy Industries at 1(866) 578-6569 from 8:00 AM to 8:00 PM EST or
Email [e-mail] or visit www.sunjoyonline.com to place your order or
fax your parts replacement order form together with your purchase receipt to 1 (740)
283-3549 for assistance.