Sunnydaze Decor GSI-707 User manual

PQ5002 Page 1 / 2
2-TIER BLOOMING FLOWER
OUTDOOR WATER FOUNTAIN
GSI-707
Read assembly instructions carefully and follow the care instructions.
Save these instructions for future reference.
Select a smooth, level surface to place the fountain.

Note: When rst used, there may be air in the pump. It may take several moments for trapped air to escape, allowing water to ow.
NOTE: The water tubing is built into the decorative top. Take care
when handling the water tube; detaching the water tube from the decorative
top will damage the fountain and void the product warranty.
  
ADecorative Top 1
BTop Tier 1
CBottom Tier 1
DElectric Submersible Pump 1
EPedestal 1
ASSEMBLY
1. Place Bottom Tier (C) into Pedestal (E), twist bottom tier to lock onto pedestal.
2. Place Electric Submersible Pump (D) into Bottom Tier (C) and run the power cord through Bottom Tier (C)
and Pedestal (E).
3. Run the built-in tubing of Decorative Top (A) through Top Tier (B), twist decorative top to lock onto top tier.
4. With assistance, connect the tubing from Decorative Top (A) to the Electric Submersible Pump (D), twist top
tier to lock onto bottom tier.
5. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 1.5 gallons.
6. Plug the power cord into a properly grounded GFCI outlet.
10/2022
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
2-PERSON
ASSEMBLY
RECOMMENDED
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.

Page 2 / 2PQ5002 10/2022
• If water is not flowing within several moments of the fountain being plugged in, the pump may have air bubbles in it,
which can prevent water from circulating properly and can cause excess pump noise.
• Ensure that the pump is not suspended above the water. The pump must be fully submerged under the water.
• Check the flow control on the body of the pump, it may need to be adjusted to achieve the desired water flow rate.
• Inspect the pump and tubing for obstructions.
• Pump noise can be caused by trapped air, low water level, or the pump being too close to the sides of the fountain.
Check the pump. If necessary, add water or moving the pump helps to reduce noise.
• Check to make sure the power outlet is working; consult a certified electrician if in doubt about electrical connections.
Troubleshooting
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.

IMPORTANT SAFETY INFORMATION
• For outdoor use only.
• Keep fountain out of reach of children and pets.
• Make sure the power cord is away from traffic areas.
• Keep power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn
out the motor.
• Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
• For outdoor use only. Some splashing is normal; adjust the flow rate on the pump if the water rate is too high.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it
will burn out the motor.
• Some climates and weather conditions increase water evaporation, requiring water to be added more frequently.
Frequently check water levels during times of high temperatures, wind, and long-term exposure to direct sunlight to
ensure the pump does not run dry.
• Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required. Tap water is okay
to use, but avoid heavily chlorinated water as it may damage the pump and cause the finish to peel.
• Periodically change the water to keep the water, fountain, and pump clean. Remove scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use anything abrasive to scrub the fountain.
DO NOT use a pressure washer.
• Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never the power cord.
• During freezing weather, drain the fountain, disconnect the pump and store indoors; allowing ice to form may damage
the fountain in such ways as, but not limited to, fountain cracking and/or permanent pump damage.
Care & Maintenance
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.