Sunnydaze Decor SSS-176 User manual

MZ14198GA Page 1 / 2
ASSEMBLY
1. Locate the tubing inside the fountain and connect the pump to the tubing.
2. Connect the light cable to the short cable on the pump. Place the pump inside the fountain and run the
power cord out the opening in the back of the fountain.
3. Slide the access panel cover over the opening in the back of the fountain.
4. Securely connect the pump power cable to the AC adapter.
5. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 1.5
gallons.
6. Plug the power cord into a properly grounded GFCI outlet.
1/2021
Note: When rst used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.
You may need to add more water as the pump begins to circulate water through the fountain.
MODERN VOGUE
OUTDOOR WATER FOUNTAIN WITH LED LIGHTS
SSS-176
Read the assembly instructions carefully and follow the care instructions. Keep these instructions for future reference.
Select a smooth, level surface to place the fountain.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
 
Fountain 1
Access Panel Cover 1
Electric Submersible Pump 1
AC Adapter 1
NOTE: The water tubing is built into the fountain.
Take care when handling the water tube; detaching
the water tube from the fountain will damage the
fountain and void the product warranty.

Page 2 / 21/2021
TROUBLESHOOTING
• Ensure that the pump is fully submerged and add water if necessary.
• If water is not flowing within several moments of the fountain being plugged in, the pump may have trapped
air which can prevent water from circulating properly. Simply unplug the power supply for a few moments
and plug it back in.
• If water is not flowing check the tubing for kinks or obstructions. Also check the pump for obstructions.
• If water is splashing, check the flow control on the body of the pump; it may need to be adjusted to achieve
the desired flow rate.
• If water is not flowing evenly, ensure the fountain is on a smooth, level surface.
• If the light is not working, ensure the cables are fully connected and the seal is adequately tightened (do not
over-tighten). Ensure connector ends are completely dry before connecting and plugging the power cord
back into an outlet.
• Soft surfaces may cause the fountain to become unbalanced. A large stepping stone or paving stone (not
included) is recommended to help ensure the fountain remains evenly balanced.
• Make sure the power outlet is working; if in doubt about electrical connections, consult a certified electrician.
If you are still experiencing issues, please contact our customer service team through one of the methods mentioned at
the top of page 1. Please have the item number and order information available to help expedite response time.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
IMPORTANT INFORMATION
• For outdoor use only.
• Some splashing is normal; adjust the flow rate on the pump body if the water flow is too high.
• Check the water level and fill frequently to ensure the pump remains fully submerged; never allow the pump
to run dry as it will burn out the motor.
• Only use water in this fountain. Distilled water will help prevent mineral buildup, but is not required. Avoid
heavily chlorinated water as it may damage the fountain and pump.
• Periodically change the water to keep the fountain and pump clean. Remove scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use abrasive materials to scrub the fountain or pump.
DO NOT use a pressure washer to clean the fountain.
• Always shut the power supply off before cleaning and maintaining the fountain and pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
• During freezing weather, drain the fountain, disconnect the pump and store indoors; allowing ice to form may
damage the fountain in such ways as, but not limited to, the fountain cracking, permanent pump damage,
and/or lighting malfunctions.
• Over time, the finish may gradually mellow in color from sun exposure; this is part of the natural aging
process and is not cause for return.

MZ14198GA