Sunnydaze Decor GSI-274 User manual

L
K
A
C
DE
B
F
G
H
I
J
CONNECT
Light
Pump
SPQ50043 Page 1 / 2
OUTDOOR FLOOR FOUNTAIN WITH CLOCK -NATURAL SLATE
GSI-274
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.

ASSEMBLY
1. Connect the lid to the fountain body, ensuring the water
tubing goes through the groove in the back of the lid.
2. Firmly connect the pump to the fountain body.
3. Place the light into the light insert.
4. Run the light cable through the front opening in the lid and set the light insert in the opening.
5. Gently place the assembled portions onto the basin, ensuring the light and pump cables run through the groove in the
back of the basin.
6. Secure the lid to the basin with the washers and bolts.
7. Hook the pendulum onto the clock and place the clock on the fountain
8. Gently lay the decorative stones on the lid.
9. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 3 gallons.
10. Plug the power cords into properly grounded GFCI outlets.
Note: When rst used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.
03/2020
  
ABasin 1
BSpotlight with AC Adapter 1
CBolt 2
DWasher 2
EElectric Submersible Pump 1
FLid 1
GWasher 2
HBolt 2
IFountain Body 1
JClock 1
KLight Insert 1
LDecorative Stones 1 PK
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerser[email protected], or via our contact us page at https://tiny.cc/SunnydazeContact
NOTE: The water tubing is built into the fountain body. Take care
when handling the water tube; detaching the water tube from the
fountain will damage the fountain and void the product warranty.
Slate is a natural product; the colors and texture of each piece
are unique, and no two fountains will look the same. The copper
components may patina; this is a natural characteristic of copper.
These natural characteristics of this fountain are not cause for return
or replacement.
2-PERSON
ASSEMBLY
RECOMMENDED
Ensure all parts are
accounted for before
disposing of packaging.

SPQ50043 Page 2 / 203/2020
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
TROUBLESHOOTING
• Ensure that the pump is fully submerged and add water to the reservoir if necessary.
• Check the pump and tubing for obstructions.
• Some splashing is normal. Check the flow control on the body of the pump; it may need to be adjusted to achieve
the desired flow rate.
• If water is not flowing evenly, it may be due to the porous nature of the slate material. Moisten the entire slate
surface beneath the downspout to even out water flow.
• If water is not flowing within several moments of the fountain being plugged in, the pump may have trapped air
which can prevent water from circulating properly. Simply unplug the power supply for a few moments and plug it
back in.
• If the light is not working, ensure the adapter is fully connected and is plugged in.
• Check to make sure the power outlet is working; if in doubt about electrical connections, consult a certified electrician.
If you are still experiencing issues, please contact our customer service team through one of the methods mentioned
at the top of page 1. To expedite response time, please have the item number and order information available.

USE & CARE
• For outdoor use only.
• The lighting feature of this fountain is optional. To turn the light off, simply unplug the 2-prong power cord.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as
it will burn out the motor.
• Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required, avoid heavily
chlorinated tap water as it may damage the fountain or pump.
• Periodically change the water to reduce scale and buildup — clean the fountain and pump regularly for optimal
performance and appearance.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use a pressure washer or abrasive materials to wash the fountain.
• Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
• During freezing temperatures, drain the fountain, disconnect the pump and store indoors; allowing ice to form may
crack the fountain and will damage the pump.
IMPORTANT INFORMATION