Sunnydaze Decor SSS-306 User manual

MZ12912BC Page 1 / 1
1. Place the electric submersible pump in the fountain basin and run the power cord through the groove in the
back of the basin.
2. Locate the tubing that is built into the spout. Run the tubing through the hole in the top of the basin and rmly
connect the tubing to the pump.
3. Gently place the spout on the basin.
4. Fill the basin with enough water to keep the pump fully submerged during operation, approximately 1 gallon.
5. Plug the power cord into a properly grounded GFCI outlet.
(1)
(2)
(5)
(4)
04/2022
NOTE:

(3)
GLAZED CERAMIC FISH
OUTDOOR WATER FOUNTAIN
SSS-306
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.


Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
NOTE: The water tubing is built into the spout. Take care when handling the water
tube; detaching the water tube from the spout will damage the fountain and void the
product warranty.
Calming water sounds
 
Spout (Fish) 1
Basin 1
Electric Submersible Pump 1
Ensure all parts are
accounted for before
disposing of packaging.
ASSEMBLY
Over time, the nish may gradually mellow in color; this is part of the natural aging process
and is not cause for return.

04/2022 Page 2 / 2MZ12912BC

WARNING!
             


IMPORTANT SAFETY INFORMATION
• For outdoor use only.
• Keep fountain out of reach of children and pets.
• Prevent water loss and damage to electrical sockets by ensuring the power cord has a drip loop; a
diagram of a drip loop is shown on the right.
• Make sure the power cord is away from traffic areas.
• Keep power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to
run dry as it will burn out the motor.
• Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
Drip Loop
Drawing is for visual reference only,
cord placement and plug type
vary by fountain style.
• If water is not flowing within several moments of the fountain being plugged in, the pump may have air bubbles in the
filter, which can prevent water from circulating properly and can also cause excess pump noise.
• Ensure that the pump is fully submerged underwater; add water to the reservoir as necessary.
• Check the flow control on the body of the pump, as it may need to be adjusted to achieve the desired water flow rate.
• Inspect the pump and tubing for obstructions.
• Pump noise can be caused by trapped air, low water level, or the pump being too close to the walls of the fountain.
While the pump is fully submerged, try gently tapping the pump with your finger to help release the trapped air. Also,
check if adding water or moving the pump helps to reduce noise.
• Check to make sure the power outlet is working; consult a certified electrician if in doubt about electrical connections.
• For outdoor use only. Some splashing is normal; adjust the flow rate on the pump if the water rate is too high.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it
will burn out the motor.
• Some climates and weather conditions increase water evaporation, requiring water to be refilled more frequently.
Check water levels often during times of high temperatures, wind, and long-term exposure to direct sunlight to ensure
the pump does not run dry.
• Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required. Tap water is okay
to use; avoid heavily chlorinated water as it may damage the fountain or pump.
• Periodically change the water to keep the water, fountain, and pump clean. Remove scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use anything abrasive to scrub the fountain.
DO NOT use a pressure washer.
• Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never the power cord.
• During freezing weather, drain the fountain, disconnect the pump and store indoors; allowing ice to form may damage
the fountain in such ways as, but not limited to, the fountain cracking and/or permanent pump damage.
Care & Maintenance
Troubleshooting
If you experience issues with assembly, pump operation, or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.