Sunnydaze Decor XSS-585 User manual

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion,
within the one-year warranty period. Proof of purchase, with the date of purchase as well as photos of the defective merchandise, must be provided. If you have any
questions, comments or concerns please feel free to contact us by phone at: 888-881-4668. You may also contact us by email: [e-mail],
or via our webpage at: www.serenityhealth.com/contact-us/
3-Tier Pebbled Edge Outdoor Fountain
PART
DESCRIPTION
QUANTITY
PART
DESCRIPTION
QUNAITITY
A
FOUNTAIN TOPPER
1
F
LED ROPE
1
B
MIDDLE PEDESTAL-SMALL
1
G
WATER PUMP
1
C
MIDDLE PEDESTAL-LARGE
1
H
LED ROPE LONG
1
D
FOUNTAIN BASIN
1
I
EVA STOPPLE
1
E
BASE PEDESTAL
1
J
ADAPTOR
1
ASSEMBLY INSTRUCTIONS:
Step 1: Place the base pedestal (E) and the fountain
basin (D) on a level surface, insert the fountain basin(D)
into the base pedestal (E) and twist clockwise to lock
the fountain basin(D).
Step 2: Route the water pump(G)’s power cord out
through the plastic tube in the fountain basin(D), lay the
water pump(G) in the bottom of the fountain basin(D),
and then route the water pump(G)’s power cord
through the base pedestal(E), the cord exits through the
bottom slot of the base pedestal(E). Lastly insert the
EVA stopple(I) in the top of the plastic tube.
Step 3: Insert, twist and lock the fountain topper(A) to
the small middle pedestal(B).
Step 4: Route the short LED rope(F) out through the
hole on the back side of the small middle pedestal, and
then route the short LED rope(F)’s power cord through
the plastic tube in the big middle pedestal(C). Press
both ends of the short LED rope in the slots that already
fixed in the big middle pedestal to fix the short LED
rope(F)

WARNING
Step 5: Insert, twist and lock the assembled fountain
topper(A) and small middle pedestal(B) to the big
middle pedestal(C), make sure the water pipe and the
short LED rope(F)’s power cord is visible on the bottom
of the big middle pedestal(C).
Step 6: Connect the water tube to the outlet nozzle of
the water pump(E).
Step 7: Route the long LED rope(H) through the hole on
the back side of the big middle pedestal(C), connect
both LED ropes to the water pump(G).
Step 8: Press both ends of the long LED rope (H) in the
slots that already fixed in the fountain basin (D), the
long LED rope (H) will be fixed around the big middle
pedestal (C).
Step 9: Insert, twist and lock the completed fountain
upper part to the fountain basin(D).
Step 10: Connect the adaptor (J) to the water pump
(G)’s power cord.
Step 11: Fill the fountain basin (D) and the smaller
basins on both middle pedestal with water. Make sure
the water pump is submerged in the water completely.
Step 12: Plug the pump in and enjoy the water fountain.