JAY Ion 5247815 Rev.E
E N G L I S H
J AY I O N
EASY MAINTENANCE & CLEANING
Regular cleaning and maintenance may help extend the
life of your cushion.
During cleaning, component inspection is recommended.
Check the cover for tears and excessive wear and or any
other abnormalities.
Check the foam base to ensure foam consistency.
To clean cover
1. Remove the outer cover from the foam base and zip
closed.
2. Machine wash in warm water and drip or tumble dry on
low heat.
No ironing required.
NOTE: Do not dry clean covers or use industrial washers
and dryers to clean cover. Do not steam autoclave. Do not
bleach.
To refit cover after washing, fit cover back over foam base.
Ensure the back of the cover matches up to the back of
the foam base.
NOTE: If utilized in an institutional setting, write the
resident’s name with a permanent marker on the content
label of the covers. This will help to ensure the return of
the covers after washing.
To clean foam base
Remove the cover from the foam base. Wipe lightly with a
damp cloth. Do not use soap. Do not submerge in water.
Wipe off with a clean cloth. Let it completely air-dry before
reassembly.
NOTE: Avoid submersion of the foam base in water.
REASSEMBLING THE JAY ION CUSHION AFTER
CLEANING
Follow cleaning and maintenance instructions as described
in “Easy maintenance and Cleaning” then reassemble as
follows.
Insert the foam base into the inner cover with white label
down and zipper to rear of cushion. Then insert base plus
inner cover into the outer cover. Make sure white inner
cover label is down and zipper is to the rear. Ensure that
both zippers are at the rear of the foam base (the part
number tag should be to the rear of the foam base) where
the pelvis is typically located.
HYGIENE MEASURES WHEN BEING RE-USED
Prior to the wheelchair being re-used, it must be carefully
prepared. All surfaces which come into contact with the
user must be treated with a disinfection spray.
To do this, you must use a disinfectant as authorised/
recommended in your country, for rapid alcohol-based
disinfection for medical products and medical devices,
which must be disinfected quickly.
Please be aware of the manufacturer’s instructions for the
disinfectant you are using.
In general, a complete disinfection cannot be guaranteed
on seams. We therefore recommend that you dispose of
seat and back slings to avoid micro-bacterial contamination
with active agents according to your local infection
protection law.
CONDITIONS FOR SAFE STORAGE
• Products should be stored in a dry place: at 20 – 75%
Relative Humidity.
• Protect from direct sunlight and dust for long periods.
• Away from direct heat and at a temperature between
5°C (40°F) to 40°C (104°F)
• Position and stack the packaged products according to
the “this side up” arrows on the packaging.
• If a package is high and narrow and therefore
potentially unstable, ensure it is well secured on the
pallet or in the racking, to prevent it from falling down.
• Do not stack anything on top of the packaged products
when the “do not stack” mark on the packaging is
shown.
• Product should never be stored outside and subject to
the elements.
JAY ION CUSHION WARRANTY
Every JAY Ion cushion base is guaranteed to be free from
defects in materials and workmanship for a period of 24
months from the date of purchase, provided normal use.
Should a defect in materials or workmanship occur within
24 months from the original date of purchase, Sunrise
Medical will, at its option, repair or replace it without
charge.This warranty does not apply to punctures, tears or
burns, nor to the cushion’s removable cover.
The removable outer and inner covers are guaranteed
to be free from defects in materials and workmanship
for a period of six (6) months from the date of purchase,
provided normal use. Should a defect in materials or
workmanship occur within six (6) months from the original
date of purchase, Sunrise Medical will, at its option, repair
or replace it without charge.
Claims and repairs should be processed through the
nearest authorized supplier. Except for express warranties
made herein, all other warranties, including implied
warranties of merchantability and warranties of fitness for a
particular purpose are excluded.
There are not warranties which extend beyond the
description on the face hereof. Remedies for breach
of express warranties herein are limited to repair or
replacement of the goods. In no event shall damages
for breach of any warranty include any consequential
damages or exceed the cost of nonconforming goods sold.
