06
The required buttons are: Setting button and buttons:
1. Setting Button: Long press to enter settings and press to confirm parameters
2. Buttons: Used to select parameter values.
Basic principle for setting up all functions is as follows:
1. Long press the function key to enter the setting for that specific function.
2. Rotate the top button to select the desired option.
3. Press the function key again to confirm and move on to the next parameter setting.
4. Repeat steps 2-3 to select and confirm all desired parameters.
Clock &Display Setting
Setting steps:
Long press to
start setting
Set
12H/24H
Set
the hour
Set
the minute
Step 1 Step 2 Step 3 Step 4
Set
the weekday
Step 5
Setting time display brightness:
1. Operation instruction: Press setting to switch display contrast.
2. There are four levels of time display brightness: O, Night, Day, and Auto.
Auto: The screen brightness is set to the Night level between 10:00 PM and 6:00 AM, and at the Day
level during all other times.
*Please note that the time display brightness in night mode can only be clearly seen in a completely
dark environment.
OFF Night Day Auto
