hatch RESTORE User manual

Personal Sleep Routine, Sleep Sounds,
Reading Light, & Sunrise Alarm
GET T I N G S T ARTED
GET T I N G TO KNOW HATCH RESTORE
Plug in Restore
Connect the custom power
cable to Restore, then plug it
into your power outlet.
1Download the app
Search for the Hatch Sleep app
on the Apple App or Google Play
store and download it to your
phone or tablet.
2Connect your Restore
Open the Hatch Sleep app
and follow the steps to connect
your Restore.
3
Touch Sensor
Tap the top of your Restore at bedtime to begin your sleep routine. Press and
hold to turn off Restore.
Power Cable Port
Keep your device plugged in for normal use.
Brightness Control
Press the brightness control buttons to increase or decrease brightness.
Volume Control
Press the volume control buttons to increase or decrease volume.
Clock
Illuminate, dim, or turn off the clock by using your Hatch Sleep app.
Reset Button
Press and release with a paperclip to reset the device.
Brightness
Control
Volume
Control
Touch Sensor
FCC ID:2AFYZ-RESTORE01

THINGS TO TRY
NEED HELP?
CARE & SAFETY
Set up your Routine
Personalize how you fall asleep, stay asleep, and wake up. Each part of your
routine can be turned on or off and customized to meet your sleep needs.
Read: Reading a book (not your phone!) for at least 20 minutes before
bedtime is a wonderful way to wind down. You can create a custom shade or
select our Reading Light color, designed to be bright enough to read by but
not blue enough to keep you awake.
Wind Down: Relax with the Wind Down content included on your Restore, or
explore Hatch Premium in the app for unlimited access to snooze-inducing
meditations, sleep stories, soundscapes, and music.
Sleep: Select from a variety of soothing sounds — white noise, water, wind,
whatever you like best. If using Restore as a nightlight, yellow to red hues are
recommended by sleep experts to promote more restful sleep.
Wake Up: The sunrise alarm lets you wake to your own sunrise, with light that
gradually brightens 30 minutes before your alarm sounds.
Our support team can help!
Email [email protected]. No need to return to the store. Learn more about Hatch Warranty.
www.hatch.co
Care Instructions
Unplug Restore before cleaning. Clean the surface with a damp cloth, avoiding the power cable port.
CAUTION: Restore may be damaged if the power cable port comes into contact with liquid.
For Your Safety and Your Child’s Safety
Always keep Restore at least three feet away from children as the cord can pose a strangulation hazard. Do not use
near or place in water.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with
Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
FCC ID 2AFYZ-RESTORE01/ IC 23920-RESTORE01

FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment. The
antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures: 1) Reorient or relocate the receiving antenna. 2)
Increase the separation between the equipment and receiver. 3) Connect the
equipment into an outlet on a circuit different from that to which the receiver is
connected. 4) Consult the dealer or an experienced radio/TV technician for
help.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.