Philips HF3505/60 User manual

User manual
Manuel d’utilisation
Manual de usuario
HF3506, HF3505

3
IMPORTANT SAFETY INSTRUCTIONS
WARNING –To reduce the risk of FIRE, ELECTRIC SHOCK, OR INJURYTO PERSONS:
1. Never use the appliance if the lamp housing is damaged, broken or missing.
2. Heed all warnings.
3. Do not look directly at lighted lamp.
4. If the appliance, power supply cord or cord has been damaged in any way, liquid has spilled or objects have fallen into
the appliance, the appliance has been exposed to rain or moisture, does not operate normally or has been dropped or
damaged, it should not be operated.
5. Read this user manual carefully before you use the appliance and save it for future reference.
6. Water and electricity are a dangerous combination. Do not use this appliance in wet surroundings (e.g. in the bathroom
or near a shower or swimming pool).
7. Make sure the adapter does not get wet.
8. Do not let water run into the appliance or spill water onto the appliance.
9. Do not immerse the appliance in water or rinse under the tap.
10. The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this causes a hazardous
situation.
11. Do not use the adapter in or near a power outlet that contains an electric air freshener to prevent damage to the
adapter.
12. Only use the original adapter. If the adapter is damaged, do not use. Call 1-866-832-4361 for assistance.
13. This appliance is for indoor use only.
14. Make sure the vents on the appliance remain open during use.
15. Protect the power cord from being walked on or pinched, particularly at plugs, outlet and point where they exit from lamp.
16. The appliance has no on/off switch. To disconnect the appliance from the power source, remove the plug from
the wall outlet.
SAVETHESE INSTRUCTIONS

4
General / Allgemeines
What’s in the box
6
Important information
Introduction
Overview
11
First use Erste Anwendung
Setting clock time
12
Buttons
Adjusting time format
13
Setting display brightness
14
7
10
/Tasten
Light on/off button
die Lampe
15
FM
Radio on/off button
16
Alarm on/off button
17
Setting alarm sound
18
Snoozing
19
20
Demonstration mode

5
Storage
21
21
21
22
22
23
Disposal
Assistance
90-Day Money-Back Guarantee
Full Two-Year Warranty
Troubleshooting

6
What’s in the box

7
Important information
Warning
– Check if the voltage indicated on the adapter corresponds to the local voltage before you connect the appliance.
– This adapter transforms 100-240 volts to a safe, low voltage of less than 15Vdc.
– The appliance is suitable for a voltage of 120 V AC and a frequency of 50/60 Hz.
– Close supervision is necessary when this appliance is used by, or near children or invalids.
– Children should be supervised to ensure that they do not play with the appliance.

8
Caution
– Donotdroptheapplianceontheoor,hitithardorexposeittootherheavyshocks.
– Place the appliance on a stable, level and non-slippery surface.
– Do not use the appliance at room temperatures lower than 50°F/ 10°C or higher than 95°F/35°C.
– Consult your doctor before you start using the appliance if you have suffered from or are suffering from serious
depression.
– Do not use this appliance as a means to reduce your hours of sleep.The purpose of this appliance is to help you wake up
more easily. It does not diminish your need for sleep.
– This appliance is only intended for household use, including similar use in hotels. Do not use attachments not
recommended by Philips North America LLC.
General
– This appliance allows you to choose the light intensity level you want to wake up to.
– If you often wake up too early or with a headache, reduce the light intensity level and/or the sunrise simulation time.
– If you share a bedroom with someone else, this person may unintentionally wake up from the light of the appliance, even
though this person is further removed from the appliance.This is the result of differences in light sensitivity between
people.
– The power consumption of the appliance is lowest when the radio and the lamp are turned off.

9
FCC Information
– This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
– This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
– This Class B digital apparatus complies with Canadian ICES-005.

10
CongratulationsonyourpurchaseandwelcometoPhilips!TofullybenetfromthesupportthatPhilipsoffers,registeryour
product at www.philips.com/welcome.
The Philips Wake-up Light helps you wake up more pleasantly.The light intensity of the lamp gradually increases to the set
level in the 30 minutes before the set wake-up time.The light gently prepares your body for waking up at the set time.To
make waking up an even more pleasant experience, you can use natural wake-up sounds or the FM radio to wake up to.
The effects of the Wake-up Light
The Philips Wake-up Light gently prepares your body for waking up during the last half hour of sleep. In the early morning
hours our eyes are more sensitive to light than when we are awake. During that period the relatively low light levels of a
simulated natural sunrise prepare our body for waking up and getting alert. People who use the Wake-up Light wake up more
easily, have a better overall mood in the morning and feel more energetic. Because the sensitivity to light differs per person,
you can set the light intensity of your Wake-up Light to a level that matches your light sensitivity for an optimal start of the day.
For more information about the Wake-up Light, see www.philips.com.
Introduction

11
Display brightness
0-4
Clock time
Sound 1
Sound 2
Alarm sound type:
FM
108.0
Mhz.
Light on/off Alarm on/off
FM on/off
1-10
87.5
Mhz.
tap to snooze
antenna
Overview
Fully
unwind
antenna

12
23
5
144
First use - setting the clock time
Youhavetosettheclocktimewhenyouplugintheapplianceforthersttimeandwhentherehasbeenapowerfailure.
16-20in/
40-50cm First use - placing the Wake-up light
Place the Wake-up Light 16-20in/40-50cm from your head, for example on a bedside table.

13
Adjusting the time format
Choose between a 12-hour and a 24-hour clock and then adjust the time.
Note:
When the 12-hour time format is selected, PM or AM will be displayed.
2 sec.
123

14
1
Adjusting the display brightness
Press the display brightness button to adjust the display brightness.You can adjust the display brightness from high,
medium, low to off. If you choose the display to be off, you can see the display again by touching it.
Note:We advise you to set the display contrast in a dark bedroom. Choose a contrast level that is optimal for you to see
the display at night.

15
Switching the light on/off
Press the lamp on/off button to switch on the light and use it as a bedside lamp.You can adjust the light intensity by pressing
the + and – buttons.To switch off the light, press the lamp on/off button again.
123

16
4
FM
12
Switching the FM radio on/off
Press the FM on/off button to switch on the FM radio.The current radio frequency is shown in the display for 5 seconds,
before clock time is shown again.To scan radio frequencies automatically, press and hold the arrow buttons for approx.
2 seconds.To set the volume level, press the volume increase or decrease button.You can choose a volume level between
1 and 10.
Tip:To get a good radio signal, fully unwind antenna and move it around until you receive the best reception.
3

17
Setting the alarm
123
4
Press the alarm button if you want to switch the alarm on or off.The alarm symbol appears on the display when you switch
on the alarm. It disappears when you switch off the alarm.When you switch on the alarm, the hour indication starts to blink
and you can adjust the alarm time.
Note:
PresstheAlarmbuttontoconrmsetalarmtimeorwait5seconds.

18
Setting your alarm sound
You can choose between 2 pre-set sounds or the FM radio as a wake-up sound.When switching to a new alarm sound or
radio, a preview of that sound/radio will be played for 5 seconds.
123

19
1
Snoozing
When the alarm sound is played at the set time, tap on the top of the Wake-up Light to snooze for 9 minutes.The lamp stays
on, but the alarm sound stops.After 9 minutes, the alarm sound is automatically played again. Do not hit the Wake-up Light
with too much force, as this may cause damage.

20
Demonstration mode
If you want a quick demonstration (90 seconds) of the gradually increasing light intensity and sound level, switch on the test
function of the appliance.
1. Press and hold the alarm button for at least 3 seconds.
2. The appliance starts the demonstration of the alarm.
3. To switch off the demonstration, press and hold the previously pressed alarm button for 3 seconds again.
1