Sunset Trading DLU-TPD-4242-B User manual

Remove the plastic
cover from the
Pedestal and Footings.
03
12.8
Assembly Completed !!..
03 03
03
02
02
a
b
c
d
Model : DLU-TPD-4242-CB (PTSD-0915)
Round Drof Leaf Dining & Pub Table
ASSEMBLY INSTRUCTION
*Don't attempt to repair or modify parts that are
broken or defective.Please contact the store
immediatedly.
*Must tighten screws periodically.With
use screws will become loose.Check tightness of
all screws every 6-8 weeks.
Keep all hardware parts out of reach of
children.
*
Important Notes
Do not tighten all screw / bolt until all completly
assembled
*
Thank You for purchasing this Quality product. It has
been engineered for easy assembly yet constructed for
durability.Please take the time to read and follow the
instruction while assembling. Ø 42" x ( 2-9'' Drop Leaf ) x 30'' & 36'' H
Pls Check to make sure you have all parts
otherwise contact local retailer or Sunset
Trading customer service
at 877-364-8464''
* *
1Turn the under side of the Table Top over
and place it on a clean and smooth surface
such as rug or carpet to avoid the Table Top from
being scratched .
2Fix the Footing to the Pedestal with
the Flat Washer,Spring Washer And Hex Nut
using the Spanner to tighten it.
3Repeat the same step for the other three Footing .
MADE IN MALAYSIA
4Fix the Pedestal with Flat Washer,Spring Washer & Hex Nut
using the Spanner to tighten it.
Hexagon Nut
5
16" x 7mm
Spanner
12.8mm
Flat Washer
5
16" x 22mm
12.8
List of hardware For 1 Set
List of Part For 1 Set
Table Top
Pedestal
Table Leg
With Leveler
Spring Washer
5
16"
a
b
c
d
01
02
03
1
1
4
1
12
02
03
Mouting Plate
a
b
c
d
01
03
12.8
01
01 01
Model : DLU-TPD-4242-B (TSD-0915)
Remove the strip before start Assembly .
12
12

ASSEMBLY INSTRUCTION
List of Part For 1 Set
Model : DLU-ADW-C50-RTA (C-1309)
ANDREWS NAPOLEON CHAIR
18 "(W) x 22" (D) x 38"(H)
*Don't attempt to repair or modify
parts that are broken or defective.
Please contact the store
immediatedly.
*Must tighten screws periodically.With
use screws will become loose.Check
tightness of all screws every 6-8
weeks.
Keep all hardware parts out of reach
of children.
*
Important Notes
Notes
*Place all wooden parts on a clean and
smooth surface such as a rug or carpet
to avoid the parts from being
scratched.
Check to be sure that you have all
parts and hardware.
*
Remove all wrapping materials
including staples & packing straps
before you start to assemble.
*
*Do not tighten all screws / bolts until all
completely assembled.
Care And Maintenance
The Touch of a soft cloth is all the maintenance
your wood pieces will ever need.
Never use harsh chemicals or abrasive cleaner
as they could mark or destroy finish.
Step 1
Step 2
f
d
e
c
d
a
e
01
02
*Do not tighten all screw / bolt until all
completely assembled.
Thank You for purchasing this Quality product. It has
been engineered for easy assembly yet constructed for durability.
Please take the time to read and follow the instruction while assembling.
Pls Check to make sure you have all
parts otherwise contact local retailer
or Sunset Trading customer service
at 877-364-8464''
**
10
Flat Washer
1
4" x 18mm
01
List of hardware For 1 Set
b
a
Chair Back 1
Front Leg (R) 1
10
Spring Washer
1
4"
e
f1
Code Figure Part Qty.
Code Figure Hardware Qty.
Spanner
10mm
c
d
4
Hex. Bolt
M6 x 80mm
4
Hex. Bolt
M6 x 60mm
2
Hex. Bolt
M6 x 40mm
02
03
Seat Frame 1
Front Leg (L) 1
04
01
01
02
05
03
05
02
g
g
04
01
b
03
e
f
d
Assembly Completed !!..
PHRS Screw
#8 x 1 1 4"4
g
05 Side Stretcher 2
02
04
g
g
g
g