Sunset Trading ANDREWS DLU-ADW-TDL-4242-AW User manual

ASSEMBLY INSTRUCTION
Model:DLU-ADW-TDL-4242-AW (DSD1939)
ANDREWS DROP LEAF SHELF TABLE
Size : 42" x 42" x 30" H
*Don't attempt to repair or modify
parts that are broken or
defective.
Please contact the store
immediatedly.
*Must tighten screws
periodically.With use screws will
become loose.Check tightness
of all screws every 6-8 weeks.
Keep all hardware parts out of
reach of children.
*
Important Notes
Do not tighten all screw /
bolt until all completely
assembled
*
MADE IN MALAYSIA
Thank You for purchasing this Quality product. It has been
engineered for easy assembly yet constructed for durability.
Please take the time to read and follow the instructions while assembling.
List of hardware For 1 Set
List of Part For 1 Set
Please be sure to read the Notes section at the bottom of the page before beginning Assembly.Thank You
*Place all wooden parts on a clean
and smooth surface such as a rug
or carpet to avoid the parts from
being scratched.
Check to be sure that you have all
parts and hardware.
*
Remove all wrapping materials
including staples & packing straps
before you start to assemble.
*
Notes
Pls Check to make sure you have all
parts otherwise contact local retailer
or Sunset Trading customer service
at 877-364-8464''
**
Step 1
Step 2
Step 3
12.8
D
12.8
Step 4
Assembly Completed !!
Table Top
1
Table Leg
1
4
Shelf 1
D
C
B
AFlat Washer
5
16" x 18mm
Spring Washer
5
16"
Spanner
12.8mm
12
12
12
1
Hex Com Bolt
5
16" x 21 2"
2
3
1
1
22
2
1
2
A
B
C
2
3
A
B
C
3
2
2
2
3
A
B
C
D
3
2
2
2
2
1
1
2
ABC
1
2
D
D

Assembly Completed !!
ASSEMBLY INSTRUCTION
List of Part For 1 Set
Model : DLU-ADW-C40-AW-RTA (C1939RTA)
ANDREW JUNIOR SIDE CHAIR RTA
*Don't attempt to repair or modify
parts that are broken or defective.
Please contact the store
immediatedly.
*Must tighten screws
periodically.With use screws will
become loose.Check tightness of
all screws every 6-8 weeks.
Keep all hardware parts out of
reach of children.
*
Important Notes
Notes
*Place all wooden parts on a clean
and smooth surface such as a rug
or carpet to avoid the parts from
being scratched.
Check to be sure that you have all
parts and hardware.
*
Remove all wrapping materials
including staples & packing straps
before you start to assemble.
*
*Do not tighten all screws / bolts until
all completely assembled.
Care And Maintenance
The Touch of a soft cloth is all the
maintenance your wood pieces will ever need.
Never use harsh chemicals or abrasive
cleaner as they could mark or destroy finish.
*
*
*Do not tighten all screw / bolt until
all completely assembled.
Thank You for purchasing this Quality product. It has
been engineered for easy assembly yet constructed for durability.
Please take the time to read and follow the instruction while assembling.
Pls Check to make sure you have all
parts otherwise contact local retailer
or Sunset Trading customer service
at 877-364-8464''
**
List of hardware For 1 Set
Step 1
Size : 17 1
2" X 21" x 34 3 8" H
MADE IN MALAYSIA
1
Left Leg Set
(FL) 1
Code Figure Part Qty.
1
Chair Back
1
Right Leg Set
(FR)
1
Center
Stretcher
2
3
4
Code Figure Hardware Qty.
A
B
C
D
JCBC Bolt
M6 x 30mm
E
Allen Key
F
JCBC Bolt
M6 x 45mm
JRN Nut 2
G
Wood Button 2
2
6
1
Spring Washer
1/4"
Flat Washer
1/4" x 13mm 6
6
FL
FR
Step 2
3
2
4
4
1
FL
FR
FR
FL
2
B
G
D
C
G
A
E
F
3
1
FR
FL
2
3