Sunset Trading DLU-MC-TL-3660-DW User manual

MID CENTURY TABLE
Model : DLU-MC-TL-3660-DW (DWVT1940)
Size : 36" X 60" X 30"H
*Don't attempt to repair or modify parts
that are broken or defective.Please
contact the store immediatedly.
*Must tighten screws periodically.With
use screws will become loose.Check
tightness of all screws every 6-8 weeks.
Keep all hardware parts out of reach
of children.
*
Important Notes
Do not tighten all screw / bolt until all
completly assembled
*
Spanner 12.8mm
Flat Washer 5 16" x 22mm
List of hardware For 1 Set
List of Part For 1 Set
Spring Washer 5 16"
a
b
c
d1
Table Top 1
4
8
Notes
*Place all wooden parts on a clean
and smooth surface such as a rug or
carpet to avoid the parts from being
scratched.
Check to be sure that you have all
parts and hardware.
*
Remove all wrapping materials
including staples & packing straps
before you start to assemble.
*
PartCode Figure Qty.
Hardware
Code Figure Qty.
Leg
8
8
Step 1
Step 2
Assembly Completed !!
a
b
2
2
2
2
c
2
2
1
d
1
1
1
The Touch of a soft cloth is all
the maintenance your wood
pieces will ever need.
Never use harsh chemicals or
abrasive cleaner as they could
mark or destroy finish.
Care And Maintenance
*
*
*
Do not put hot pan or hot pot on
table top directly and please use
isolated pad.
ASSEMBLY INSTRUCTION
MADE IN MALAYSIA
Thank You for purchasing this Quality product. It has been
engineered for easy assembly yet constructed for durability.
Please take the time to read and follow the instructions while assembling.
Please be sure to read the Notes section at the bottom of the page before beginning Assembly.Thank You
Pls Check to make sure you have all
parts otherwise contact local retailer
or Sunset Trading customer service
at 877-364-8464''
**
Hexagon Nut
5
16" x 7mm

List of Part For 1 Set
ASSEMBLY INSTRUCTION
MODEL : DLU-MC-C45-DW-RTA (C1941RTA)
SIZE : 18 1/2" x 24" x 34 1/2" H
*Don't attempt to repair or modify
parts that are broken or
defective.Please contact the
store immediatedly.
*Must tighten screws
periodically.With use screws will
become loose.Check tightness
of all screws every 6-8 weeks.
Keep all hardware parts out of
reach of children.
*
Important Notes
*Do not tighten all screw / bolt
until all completely assembled.
The Touch of a soft cloth is all the
maintenance your wood pieces will ever
need.
Never use harsh chemicals or abrasive
cleaner as they could mark or destroy
finish.
MID CENTURY CHAIR W/STAIN RES FABRIC
11
Flat Washer
1
4" x 18mm
List of hardware For 1 Set
Chair Back
1
Front Leg 2
11
Spring Washer
1
4"
1
Code Figure Part Qty.
Code Figure Hardware Qty.
Spanner 10mm
4
Hex.Bolt
M6 x 80mm
4
3
1
1
A
Cushion Seat
Hex.Bolt
M6 x 60mm
Hex.Bolt
M6 x 40mm
Notes
*Place all wooden parts on a clean and
smooth surface such as a rug or carpet
to avoid the parts from being
scratched.
Check to be sure that you have all
parts and hardware.
*
Remove all wrapping materials
including staples & packing straps
before you start to assemble.
*
Care And Maintenance
*
*
2
3
B
C
D
E
F
Assembly Completed !!
Step 1
D
C
D
A
E
2
F
E
F
1
B
E
F
D
2
3
3
3
2
1
Thank You for purchasing this Quality product. It has
been engineered for easy assembly yet constructed for durability.
Please take the time to read and follow the instruction while assembling.
Pls Check to make sure you have all
parts otherwise contact local retailer
or Sunset Trading customer service
at 877-364-8464''
**
MADE IN MALAYSIA
Step 2
1
2