SUNSET NEB402 User manual

Handheld Mesh Nebulizer
IFU-00073 REV 1.01
2023-04-13
NEB402
User Guidance

Notice
Add liquid medication before turning on device.
Do not use products containing oil or liquid
atomization.
Follow doctor's advice on medication selection, usage
and treatment time.
Use clean water for nebulization. Do not use distilled
water, multiple-filtered purified water or oil
substances.
Clean and maintain the device after each use.
Keep the device, medication cup and accessories dry
after each use.
Do not touch the mesh with sharp or hard objects or
with fingers.
Charge at least 30 minutes before first use.
1
2
3
4
5
6
7
8

To open lid, turn counter-clockwise.
Add proper liquid medication. Do not exceed
the max scale indication.
Operating Steps
1
2

Tighten the lid by turning clockwise.
Connect mask or mouthpiece.
3
4

Start nebulizing.
Tip: Before nebulizing, shake slightly to ensure
solution makes contact with nebulizer.
If the green light flashes three times, please ensure
you have enough liquid medication in the chamber.
If there is sufficient medication, wait until green
light flashes, then restart device with the power
button to finish treatment.
5

The provided USB cord is not meant to be used
with any other electronic equipment.
Keep all contact points clean and dry after use.

Turn the cap counter clockwise to loosen and remove
from unit. Remove mouthpiece or mask with a twist.
Open the lid and pour out any liquid
medication residue.
Cleaning Guidance
1. Preliminary Cleaning
1
2

Add appropriate amount of clean, warm
water (Below 104° F). Do not use distilled
water or multiple-filtered purified water.
Tighten the lid.
3
4

Run the nebulizer. Wipe the outside of the
machine with clean medical gauze after
nebulization cleaning. Do not touch the central
area of the mesh in order to avoid damaging.
Hold down the cup release (”PRESS”) button
and pull out the medication cup.
2. Regular Cleaning
5
1

Wash the outside and inside of the medication cup and
with clean water (Below 104° F). Dry with clean medical
gauze. Do not touch the center of the mesh to avoid
damaging it. Put the device and accessories back into the
included bag and store them as instructed in manual.
Tip: When cleaning device, nebulize with 3 parts of clean
water to 1 part white vinegar.
Notice: Diagram is for reference only. Device color
may be altered.
Clean the inside
of medication cup
Clean the outside
of the misting
connector interface
Clean the inside
of the misting
connector interface
2