Sunsky TGPS0504B User manual

1
GSM/GPRS/GPS TRACKER
MANUAL
Preface
Thank you for purchasing the tracker. This manual shows how to operate the
device smoothly and correctly. Make sure to read this manual carefully before
using this product. Please note that specification and information are subject to
changes without prior notice in this manual. Any change will be integrated in
the latest release. The manufacturer assumes no responsibility for any errors
or omissions in this document.

2
1. Summary
Working Based on existing GSM/GPRS network and GPS satellites, this
product can locate and monitor any remote targets by SMS or internet.
Specifications
Content
Specs
Dim.
63mm x 46mm x 21mm
Weight
39g
Network
GSM/GPRS
Band
850/900/1800/1900Mhz
GSM chip
MTK6261
GPS chip
U-blox 7020
GPS sensitivity
-159dBm
GPS accuracy
5m
Time To First Fix
Cold status 45s
Warm status 35s
Hot status 1s
Work voltage
5V
Storage Temp.
-40°C to +85°C
Operation Temp.
-20°C to +55°C
Humidity
5%--95% non-condensing
Main functions
·GSM quad-band frequency;
·Real time tracking by SMS/GPRS
·Low battery alarm;
·Geo-fence alarm ;
·move alarm
·SOS alarm ;

3
·Add Smart sleep save power Mode
·Add AGPS function,receive GPS signals faster
·Add built-in storage memory
·Add WATERPROOF and dust proof
·patented product
·Add Roll call positioning
·Add app set
2.Led indicator status
LED INDICATOR STATUS
MEANING
RED LED continuously work
Charging
RED LED not lit
Fully charged
Green LED Flashing
Success get GSM signal
Green LED continuously lit
Searching GSM signal
3.1 Notices:
1).GPS tracking can be worked outdoor. Must have mobile phone gsm signal
and have GPS signal, It can block GPS satellite signal when there are metal
or building above the GPS tracker
2).Pls make sure GSM 2g SIM card or compatibility 2G GSM network sim card,
supports making calls, sending messages, GPRS network.have money,Cancel
the PIN code

4
3.2 Quick using
Use mobile phone call the device and hang up
or sending message “smslink123456” to sim card in tracker ,then send
message “time zone123456 time”tracker reply positioning information,time is
loca time zone

5
Picture (1) have gps signal Picture (2) no gps signal
Pic(1)：Replied real-time tracking information
Lat:22.67533 lon:114.03913: Positioning of the latitude and longitude
Speed：000.1: device moving speed. The unit is km/h.
T:06/14/17 09:14 : real-tracking time, the Default is London time. You can
Set a time zone by sms command
Google Link: showing the position of the device.
Pic( 2) ：Replied last time position information. Now is LBS position
information. no gps signal
smcc:27a4 1223: Real-time LBS data.
Time:08/00/00 LBS positioning time.
If you received positioning information as picture 2, please take gps tracker go to ou
tdoor and Walking ,then you can receive the satellite signal
4:Support Website tracking and APP tracking
4.1 Scan APP and Download APP
1)scan QR code---open with browser--- choose Android or
IPHONE---Download-- installation app

6
2) Download iOS APP:login in app store---dagps---Install the dagps APP
4.2: login platform positioning
1)Open www.gps110.org
Use tracker ID login, default password 123456.
PC login APP login
4.3 register Administrator account and tracking multiple devices
operation ：register APP accounts--- Fill in the APP---login in registered accounts
device list----add device---fill in --OK

7
Registration fill in
Click vehicle list add device
If you add device more than two , continue to add ID number
If device online in platform, no need set apn commands

8
5. Set APN
SMS1: APN123456+space+Apn name
( APN name pls ask the sim card company ,for example tell you the apn name
is ABC,so send :APN123456 ABC)
(If have the APN user name and password, need plus APN user name and
password behind the APN name)
Eg: APN123456+space+APN name+space+ APN user name+space+ APN
password
It is Real time positioning,every 2min upload position by default,you can
change upload time interval
6 If use the other platform, start on line tracker
in advance Using mobile phone send SMS commands or app set online platform
(please set DNS and port,set apn)
(Use the default platform, don't need to operate 6)
7.Working mode
【Mode 1】：real-time positioning,Trajectory mode (default)
APP→instruction →mode switch→trajectory mode:every 2mins/1 times
positioning,(work 24 h)
【Mode 2】：Roll call positioning,save power mode
APP→instruction →mode switch→save power mode →point positioning→location
(Standby 7 days)

9
【Mode 3】：sms mode positioning
Use mobile phone call the device and hang up,you will receive positioning
or send “smslink123456 ”to sim card in tracker, you wil receive positioning
(Standby time 12 days)
【Mode 4】：vibration save power mode (optional,The default do not have this
function)
Upload the positioning data when device vibration and not sending the data
When device static,In order to save power and save gprs cost (can work 3days)
6.Command
NOTE:
1) Device default password:123456)
2)use of mobile phones APP or send message to the tracker about all set command
3)If you want standby time longer, pls don't open move alarm, and real-time
location tracking.etc
NAME
COMMAND
EXAMPLE
Set apn
apn123456 apn Name
apn123456 cmnet
apn123456 apn name user password
Apn123456 cmnet cmwap 66666
Set IP /DNS
port
adminip123456 IP port
Adminip123456 110.92.64.21 7018
Adminip123456 DNS port
Adminip123456 www.gps110.org
7018
parameter
Check123456
Get device status

10
INSTRUCTION
Example
REPLY
position
smslink123456
Get adress
Set admin number
admin123456 mobile number
admin ok
Cancel admin number
noadmin123456 mobile number
noadmin ok
SOS alarm
Long press SOS
Help me
Cancel SOS
nohelp me
nohelp
Set time zone
time zone123456 local time
Time zone ok
Set time zone(half time zone)
Time zone123456 8 30
time zone ok
set move alarm
move123456
(in order to save power,suggest not open)
move ok
Cancel move alarm
nomove123456
nomove ok
Open low battery alarm
Lowbattery123456 on
Low batter ok
Cancel low battery alarm
Lowbattery123456 off
Low batter ok
Cancel GPRS
sms123456
smsok
Set shock alarm(optional)
Shock123456
Shock ok
Cancel shock (opitional)
noshock123456
Noshock ok
Monitor (optional)
monitor123456
Monitor ok
Cancel monitor (optional)
tracker123456
Tracker ok
Cancel shock alarm
noshock123456
noshock ok
real-time tracking (default)
t002m***n123456
002m is every 2mins/1 times positioning
Can change the positioning time interval
T n ok
Reset factory
begin123456
begin ok

11
7.FAQ
FAQ
Instructions/Solutions
Fail to turn on
Please check if device has electricity and charge line to
be rechargeable
No GSM signal
Please check if SIM card installed correctly.
Please check if SIM card is 2G GSM network.
Cancel Sim card PIN code
no calls can be diverted
No GPS
make sure the device can receive the GPS signal
normally.in outdoor,or take device to walk around
No reply to SMS
command
SMS command password wrong or the format is
wrong. restore factory settings send “begin123456”
No reply & No
alarm message
Check if Authorized / admin phone number is incorrect
and sim card is normal
SMS position OK,
cannot positoning the
APP and web
Pls check if APN is correctly set And pls find out the
correct APN content

12
Platform position is
difference from the
actual position.
No uploading position time or no GPS signal,reply
position is last time. If it shows like Pic 2, pls make sure
the device can receive the GPS signal normally.in
outdoor,and take device to walk around