Sunso WTP-801 User manual

WTP-801
Quick Start Guide
Packing List
CD
Power Cord
Quick Start Guide
Printer USB Cable
Note:
The power adapter and power cord vary by local or region.
Power AdapterSerial Cable Roll Paper
Appearance and Components
Front
Inside
Printer Cover
Control Panel
Rear
Power supply interface
USB interface Cash drawer interface
Serial interface
Ethernet interface
LED Indicator


Platen

1
2
3



3.Pull out some roll paper, and close the printer cover.
1.Connect power adapter to printer.
2.Connect power adapter to power cord.
3.Plug the other side of power cord into the socket outlet.
Power Cord
Power Adapter

Power Supply
Bluetooth/Ethernet/Wi-Fi 

Default name: BT Printer
Default password: 0000 or 1234
Refer to POS Printer Bluetooth Manual for more details.

Printer WiFi factory default is AP mode with IP address

phone is connected to printer successfully, users can click


Access password: 12345678
.

Connect Ethernet to the printer.

“192.168.0.31”, Subnet mask “255.255.255.0” and Default
gateway “192.168.0.1”.



