SunSun CHL Series User manual

User’s Manual
CHL Pump
55551–55556
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.

© by WilTec Wildanger Technik GmbH Item 55551–55556 Page 2
http://www.WilTec.de
http://www.aoyue.eu 01 2023-1
http://www.teichtip.de
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

© by WilTec Wildanger Technik GmbH Item 55551–55556 Page 3
http://www.WilTec.de
http://www.aoyue.eu 01 2023-1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Properties
•This product being multipurpose, it can be used for many applications: aquarium fish tanks,
garden fountains, water-cooled air conditioning, mechanical equipment cooling, etc.
•Integrated thermal protection chip
•Pump with flat-suction design
•Strong circulated suction of the water
•Streamlined carry handle
•Easy handling
•Sealed with high-quality resin adhesive, well insulated, and safe to use
•Equipped with rubber buffers that effectively reduce functional noise and absorb strongly
Safety instructions
CAUTION:
In and near standing water, garden ponds, and swimming ponds, the use of this device is only allowed
with a fault current protection switch with a triggering nominal current up to 30 mA (according to VDE
0100 Article 702 and 738).
The device is not suitable for use in swimming pools, paddling pools of any kind, or bodies of water in
which people or animals may stay during operation. Operation of the device with people being in the
danger area is not permitted. Contact an electrician.
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory, and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or follow the instructions made by this person on how to correctly
use the device. Children should be supervised to ensure that they do not play with the device.
ATTENTION:
•Perform a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•Only use the device accordingly to the intended purpose stated in this manual.
•You are responsible for the safety of the working zone.
•If the cable or plug is damaged due to external influences, the cable must not be repaired, but
must be replaced with a new one. This work may only be carried out by a qualified electrician.
•The voltage of 230 V AC indicated on the nameplate of the device must match the existent
mains voltage.
•Never lift, carry, or fix the device by using the power cable.
•Make sure that the electric plug connections are protected from flood and humidity.
•Always unplug the device before working on it.
•The user is responsible for complying with local safety and mounting regulations. If necessary,
ask a qualified electrician.
•The user must take appropriate measures (e.g., installation of an alarm system, a reserve pump,
etc.) to prevent damage caused by the flooding in case of device malfunctioning.
•In case of device failure, repairs can only be carried out by an electrician.

© by WilTec Wildanger Technik GmbH Item 55551–55556 Page 4
http://www.WilTec.de
http://www.aoyue.eu 01 2023-1
http://www.teichtip.de
•The device must never run dry or be operated with its suction line fully closed. The manufac-
turer’s warranty is void for damage to the device caused by dry running.
•Do not use this device to operate swimming pools.
•This device must not be integrated into any kind of domestic water circuit meant for potable
water.
WARNING:
Read all safety precautions and instructions. Failure to obey the safety precautions and instructions
might cause an electric shock, a fire, and/or severe injuries. Keep all safety precautions and instructions
for future use.
Technical specifications
Item num-
ber
Pump
Power supply
Power (W)
Max. lifting
height (m)
Flow
rate (ℓ⁄h)
Outlet opening
(㎝)
55551
CHL-1000
220–
240 V/50 Hz
15
1.4
1000
1,58 (5⁄8″)
55552
CHL-1500
25
1.8
1500
1,27 – 1,58 –
1,90 (½″ – 5⁄8″ –
¾″)
55553
CHL-2500
40
2.3
2500
1,27 – 1,58 –
1,90 (½″ – 5⁄8″ –
¾″)
55554
CHL-3000
55
2.8
3000
1.58 – 1.90 –
2.54 (½″ – 5⁄8″ –
¾″)
55555
CHL-3500
70
3.2
3500
1,58 – 1,90 –
2,54 (½″ – 5⁄8″ –
¾″)
55556
CHL-4500
100
3.8
4500
1.58 – 1.90 –
2.54 (½″ – 5⁄8″ –
¾″)

© by WilTec Wildanger Technik GmbH Item 55551–55556 Page 5
http://www.WilTec.de
http://www.aoyue.eu 01 2023-1
http://www.teichtip.de
Parts list
№
Name
№
Name
1
Outlet
5
Filter basket
2
Motor cover
6
Rubber pads
3
Housing
7
Lower cover position
4
Magnet rotor
8
Handle
Maintenance
Regularly clean the pump to allow it to keep its full power.
1. Remove the fixing screw at the bottom of the pump to open.
2. The rotor can be removed immediately.
3. Wipe the rotor off with a soft cloth, then rinse the pump housing with clean water to remove all
the dirt.

© by WilTec Wildanger Technik GmbH Item 55551–55556 Page 6
http://www.WilTec.de
http://www.aoyue.eu 01 2023-1
http://www.teichtip.de
Regulations for waste disposal
The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU was
implemented in the German law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed-
out wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with the
domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR (Stiftung Elektro-
Altgeräte Register) under the WEEE-registration number DE45283704.
Disposal of used electrical and electronic devices (in-
tended for use in the countries of the European Union
and other European countries with a separate waste
collection system for these devices).
The symbol on the packaging or the product itself indi-
cates that this product must not be treated as normal
domestic waste but must be disposed of at a recycling
collection station for electrical and electronic waste.
By disposing of this product correctly, you contribute to
the protection of the environment and the health of your
fellow people. Inappropriate disposal threatens the en-
vironment and health.
Material recycling helps to reduce the consumption of raw materials.
Additional information about the recycling of this product can be provided by your local commune, the
municipal waste disposal facilities, or the store where you purchased the product.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
52249 Eschweiler Germany
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.