
3
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
1. EXPLANATION OF SYMBOLS
AND SAFETY INSTRUCTIONS
1.1. Explanation of symbols
CAUTION! - Important
recommendation or warning
concerning safety conditions
duringinstallationandoperationofboiler.
DANGER! - fault or improper use
may cause injury or be hazardous
tolifeofhumansoranimals.
FIRE HAZARD!- fault or improper
installation and operation may
causefire.
INFORMATION- Important
information on the proper
operationoftheproduct.
1.2. Requirements to stove installation
room.
This manual contains important
information for the safe and correct
installation, start-up and trouble-free
operationandmaintenanceoftheboiler.
ThePelletStovecanbeusedforheating
rooms only in the manner described in
thismanual.
The application and any other was the
areaofoperationisnotrecommendedby
the manufacturer and is not responsible
fortheoccurrenceofdefectsorfailures.
Notetheboiler typedataonthefactory
rating label and the technical data
providedinchapter10inordertoensure
properoperationoftheproduct.
1.2.1. Instructions for the installer.
During installation and operation, the
country-specific requirements and
regulationsmustbeobserved:
•Local construction regulations on
installation, air supply and exhaust
gas extraction as well as chimney
connection.
•Regulations and norms concerning the
fitting of the heating installation with
safetydevices.
•Installationofcarbonmonoxidedetector
isrecommended.
•Obligatory maintenance – the pellet
stove must be cleaned immediately
after each consumption of certified
pellets between 800 kg to 1000 kg or
ifusageislessatleastonceayear.This
maintenancemustbeperformedby an
authorizedbyBURNITservicecenter.As
longasthepelletstoveisinitswarranty
periodall themaintenance andservice
must be performed by the authorized
service who has performed the initial
installation.
iUse only original BURNiT parts
WARNING! Installation and setup
of the stove should be done
by an authorized specialist /
service shop and must follow the
safety instructions and rules of
operation.
DANGER of intoxication,
suffocation.
Inadequate inflow of fresh air to
the stove room may result in
dangerous leak of exhaust gases
during stove operation.
-Make sure the air inlets and
exhaust gas outlets are not
clogged or closed.
- If faults are not remedied
immediately, the pellet stove
must not be operated.
- The user must be provided with
written instructions on the fault
and the hazard it entails.
It is mandatory to assure a backup
power generator of corresponding
rated power! (see table 1)
Customer must undergo stove
operation/maintenance training
by authorized installer/service
shop.