Extraflame COMFORT P70 AIR User manual

MADE IN ITALY
design & production
INSERTO COMFORT P70 AIR - P70 AIR PLUS
004280424 - Rev 000
UK PELLET STOVES USER MANUAL

2ENGLISH
APPLY TECHNICAL
DATA LABEL

3ENGLISH
ENGLISH........................................................................................................................................................................................................................................ 4
WARNINGS.................................................................................................................................................................................................................................... 4
SAFETY.......................................................................................................................................................................................................................................... 4
ROUTINE MAINTENANCE............................................................................................................................................................................................................ 6
INSTALLATION.............................................................................................................................................................................................................................. 7
PREPARATIONS FOR MAINTENANCE....................................................................................................................................................................................................................................7
DETAILS OF INSERTO COMFORT P70 AIR.................................................................................................................................................................................. 9
COMFORT P70 AIR PLUS INSERT DETAILS .............................................................................................................................................................................. 10
INSTALLATION INSERTO COMFORT P70 AIR -P70 AIR PLUS ................................................................................................................................................11
GENERAL........................................................................................................................................................................................................................................................................................11
MINIMUM CLEARANCE............................................................................................................................................................................................................................................................11
INSTALLATION.............................................................................................................................................................................................................................................................................12
FRESH AIR DUCTS ...................................................................................................................................................................................................................... 14
EXISTING INSTALLATION.........................................................................................................................................................................................................................................................14
NEW INSTALLATION..................................................................................................................................................................................................................................................................15
SAFETY LATCH............................................................................................................................................................................................................................ 16
EXTRACTION OF INSERT AND PELLET LOADING ................................................................................................................................................................... 17
PELLETS AND FEEDING .............................................................................................................................................................................................................17
OPTIONAL LOADING ACCESSORIES ........................................................................................................................................................................................ 18
FRONT PELLET LOADING KIT.................................................................................................................................................................................................................................................18
UPPER/SIDE PELLET LOADING KIT ......................................................................................................................................................................................................................................18
BULB THERMOSTAT REARM...................................................................................................................................................................................................... 18
FUSE ............................................................................................................................................................................................................................................18
COMFORT P70 AIR PLUS HOT AIR DUCTING........................................................................................................................................................................... 19
ADDITIONAL THERMOSTAT TO CONTROL THE DUCT MOTOR ................................................................................................................................................................................19
OPERATION IN AIR DUCTING WITH THERMOSTAT OR PROBE (OPTIONAL)........................................................................................................................20
EMERGENCY MODULE............................................................................................................................................................................................................... 21
RADIO CONTROL........................................................................................................................................................................................................................ 22
CONFIGURATION........................................................................................................................................................................................................................................................................22
RADIO CONTROL ROOM PROBE CALIBRATION.............................................................................................................................................................................................................22
BATTERY TYPE AND REPLACEMENT...................................................................................................................................................................................................................................22
RADIO CONTROLFEATURES..................................................................................................................................................................................................... 23
DISPLAY ...................................................................................................................................................................................................................................... 24
GENERAL MENU .........................................................................................................................................................................................................................25
GENERAL WARNINGS................................................................................................................................................................................................................................................................25
FIRST IGNITION SETTINGS........................................................................................................................................................................................................ 26
DATE/TIME ....................................................................................................................................................................................................................................................................................26
LANGUAGE....................................................................................................................................................................................................................................................................................26
DEGREES........................................................................................................................................................................................................................................................................................26
OPERATION AND LOGIC ............................................................................................................................................................................................................ 27
MODES ................................................................................................................................................................................................................................................................ 28
FRONT AIR .......................................................................................................................................................................................................................................................... 28
AIR DUCTING (P70 AIR PLUS ONLY)............................................................................................................................................................................................................. 28
AIR ZONE CONTROL (P70 AIR PLUS ONLY)................................................................................................................................................................................................. 28
EASY SETUP........................................................................................................................................................................................................................................................ 28
CHRONO ............................................................................................................................................................................................................................................................. 29
ENABLING.................................................................................................................................................................................................................................................. 29
PRG 1-4....................................................................................................................................................................................................................................................... 29
SETTINGS............................................................................................................................................................................................................................................................ 31
DISPLAY ..................................................................................................................................................................................................................................................... 31
STAND BY .................................................................................................................................................................................................................................................. 31
OPERATION WITH ADDITIONAL THERMOSTAT (OPTIONAL)...................................................................................................................................................................................31
FIRST LOAD ............................................................................................................................................................................................................................................... 32
DELTA-T ..................................................................................................................................................................................................................................................... 32
RESET.......................................................................................................................................................................................................................................................... 32
EASY CONTROL ........................................................................................................................................................................................................................................ 32
ADDITIONAL FUNCTIONS......................................................................................................................................................................................................... 32
DELAY SWITCH-OFF ..................................................................................................................................................................................................................................................................32
CLEANING AND MAINTENANCE...............................................................................................................................................................................................33
MAINTENANCE........................................................................................................................................................................................................................... 33
PERIODIC CLEANING UNDER USER'S RESPONSIBILITY ..............................................................................................................................................................................................33
ROUTINE MAINTENANCE PERFORMED BY QUALIFIED TECHNICIANS ................................................................................................................................ 35
SHUT-DOWN (END OF SEASON)..........................................................................................................................................................................................................................................35
DISPLAYS .................................................................................................................................................................................................................................... 39
ALARMS ......................................................................................................................................................................................................................................39
DISPOSAL.................................................................................................................................................................................................................................... 40
ATTENTION
SURFACES CAN BECOME VERY HOT!
ALWAYS USE PROTECTIVE GLOVES!
During combustion, thermal energy is released that signicantly increases the heat of surfaces, doors, handles, controls, glass, exhaust
pipes, and even the front of the appliance. Avoid contact with those elements if not wearing protective clothing (protective gloves
included). Make sure children are aware of the danger and keep them away from the stove during operation.

4ENGLISH
WARNINGS
This instructions manual is an integral part of the product: make sure that
it always accompanies the appliance, even if transferred to another owner
or user, or if transferred to another place. If it is damaged or lost, request
another copy from the area technician. This product is intended for the use
for which it has been expressly designed. The manufacturer is exempt from
any liability, contractual and extracontractual, for injury/damage caused to
persons/animals and objects, due to installation, adjustment and mainte-
nance errors and improper use.
Installation must be performed by qualied sta, which assumes com-
plete responsibility for the denitive installation and consequent good
functioning of the product installed. One must also bear in mind all laws
and national, regional, provincial and town council Standards present
in the country in which the appliance has been installed, as well as the
instructions contained in this manual.
The use of the appliance must comply with all local, regional, national
and European regulations.
The Manufacturer cannot be held responsible for the failure to comply
with such precautions.
After removing the packaging, ensure that the content is intact and com-
plete. Otherwise, contact the dealer where the appliance was purchased.
All electric components that make up the product must be replaced with
original spare parts exclusively by an authorised after-sales centre, thus
guaranteeing correct functioning.
SAFETY
THE APPLIANCE MAY BE USED BY CHILDREN 8 YEARS OF AGE OR
OLDER AND INDIVIDUALS WITH REDUCED PHYSICAL, SENSORY, OR
MENTAL CAPACITIES OR WITHOUT EXPERIENCE OR THE NECESSARY
KNOWLEDGE, PROVIDED THAT THEY ARE SUPERVISED OR HAVE
We thank you for having chosen our company; our product is a great heating solution developed from the
most advanced technology with top quality machining and modern design, aimed at making you enjoy the
fantastic sensation that the heat of a ame gives, in complete safety.

5ENGLISH
RECEIVED INSTRUCTIONS ON SAFE USE OF THE APPLIANCE AND THAT
THEY UNDERSTAND THE INHERENT DANGERS.
THE GENERATOR MUST NOT BE USED BY PERSONS (INCLUDING
CHILDREN)WITH REDUCED PHYSICAL, SENSORY AND MENTAL
CAPACITIES OR WHO ARE UNSKILLED PERSONS, UNLESS THEY ARE
SUPERVISED AND TRAINED REGARDING USE OF THE APPLIANCE BY A
PERSON RESPONSIBLE FOR THEIR SAFETY.
THE CLEANING AND MAINTENANCE REQUIRED BY THE USER MUST
NOT BE PERFORMED BY CHILDREN WITHOUT SUPERVISION.
CHILDREN MUST BE CHECKED TO ENSURE THAT THEY DO NOT PLAY
WITH THE APPLIANCE.
DO NOT TOUCH THE GENERATOR WHEN YOU ARE BAREFOOT OR
WHEN PARTS OF THE BODY ARE WET OR DAMP.
IT IS FORBIDDEN TO MODIFY THE APPLIANCE IN ANY WAY.
DO NOT PULL, REMOVE, TWIST THE ELECTRICAL CABLES COMING
OUT OFTHE PRODUCT EVEN IF IT IS DISCONNECTED FROMTHE MAINS.
IT IS ADVISED TO POSITION THE POWER SUPPLY CABLE SO THAT IT
DOES NOT COME INTO CONTACT WITH HOT PARTS OF THE APPLIANCE.
THE POWER SUPPLY PLUG MUST BE ACCESSIBLE AFTER
INSTALLATION.
DO NOT CLOSE OR REDUCE THE DIMENSIONS OF THE AIRING VENTS
IN THE PLACE OF INSTALLATION. THE AIRING VENTS ARE ESSENTIAL
FOR CORRECT COMBUSTION.
DO NOT LEAVE THE PACKAGING ELEMENTS WITHIN REACH OF
CHILDREN OR UNASSISTED DISABLED PERSONS.
THE HEARTH DOOR MUST ALWAYS BE CLOSED DURING NORMAL
FUNCTIONING OF THE PRODUCT.
WHEN THE APPLIANCE IS FUNCTIONING AND HOT TO THE TOUCH,
ESPECIALLY ALL EXTERNAL SURFACES, ATTENTION MUST BE PAID
CHECK FOR THE PRESENCE OF ANY OBSTRUCTIONS BEFORE
SWITCHING THE APPLIANCE ON FOLLOWING A PROLONGED PERIOD
OF INACTIVITY.
THE GENERATOR HAS BEEN DESIGNED TO ADJUST ITSELF
AUTOMATICALLY IN PARTICULAR OPERATING CONDITIONS
THE GENERATOR HAS BEEN DESIGNED TO FUNCTION IN ANY
CLIMATIC CONDITION. IN PARTICULARLY ADVERSE CONDITIONS

6ENGLISH
(STRONG WIND, FREEZING)SAFETY SYSTEMS MAY INTERVENE
THAT SWITCH THE GENERATOR OFF. IF THIS OCCURS, CONTACT THE
TECHNICAL AFTER-SALES SERVICE AND ALWAYS DISABLE THE SAFETY
SYSTEMS.
IN THE EVENT THE FLUE CATCHES FIRE, USE SUITABLE SYSTEMS
FOR SUFFOCATING THE FLAMES OR REQUEST HELP FROM THE FIRE
BRIGADE.
THIS APPLIANCE MUST NOT BE USED TO BURN WASTE
DO NOT USE ANY FLAMMABLE LIQUIDS FOR IGNITION
DURING THE FILLING PHASE DO NOT PUT THE BAG OF PELLETS TO
INTO CONTACT WITH THE PRODUCT
THE MAJOLICAS ARE TOP QUALITY ARTISAN PRODUCTS AND
AS SUCH CAN HAVE MICRO-DOTS, CRACKLES AND CHROMATIC
IMPERFECTIONS. THESE FEATURES HIGHLIGHT THEIR VALUABLE
NATURE. DUE TO THEIR DIFFERENT DILATION COEFFICIENT, THEY
PRODUCE CRACKLING, WHICH DEMONSTRATE THEIR EFFECTIVE
AUTHENTICITY. TO CLEAN THE MAJOLICAS, IT IS RECOMMENDED TO
USE A SOFT, DRY CLOTH. IF A DETERGENT OR LIQUID IS USED, THE
LATTER COULD PENETRATE INSIDE THE CRACKLES, HIGHLIGHTING
THEM.
SINCE THE PRODUCT CAN TURN ON AUTOMATICALLY THANKS TO
THE TIMER, OR REMOTELY USING THE DEDICATED APPLICATIONS, IT IS
STRICTLY FORBIDDEN TO LEAVE ANY COMBUSTIBLE OBJECT WITHIN
THE SAFETY DISTANCES INDICATED ON THE TECHNICAL DATA PLATE.
INTERNAL COMBUSTION CHAMBER PARTS CAN BE SUBJECT TO
EXTETICAL WARN, IT DOESN'T AFFECT THE FUNCTIONALITY
ROUTINE MAINTENANCE
Based on Decree 22 January 2008 n°37 art.2, routine maintenance means
interventions aimed at reducing degradation due to normal use, as well
as dealing with accidental events entailing the need of rst interventions,
which however do not modify the structure of the system upon which one
is intervening or its intended use according to the requirements laid down
by the technical standards in force and by the manufacturer's use and main-
tenance manual.

7ENGLISH
INSTALLING INSERTS
When installing inserts, access must be prevented to the internal parts of the appliance and it must not be possible to access live parts during
extraction operations.
Any wiring, for example the power cable or room probe, must be positioned so as not to be damaged during movement of the insert and must
not come into contact with hot parts. If a cavity made of combustible material is installed, we recommend taking all the safety precautions
indicated by the installation standards.
VENTILATION AND AERATIONOF INSTALLATION ROOMS
In case of non-airtight heater and/or installation, the ventilation must respect the minimum area indicated below (considering the highest value
among those provided):
Appliance categories Reference standard
Percentage of the
net opening section with respect to the
appliance fumes outlet section
Minimum net opening value of the
ventilation duct
Pellet stoves UNI EN 14785 - 80 cm²
Boilers UNI EN 303-5 50% 100 cm²
INSTALLATION
GENERAL
The ue gas exhaust and hydraulic connections must be carried out by qualied personnel who must issue installation conformity
documentation compliant with national standards.
The installer must provide the owner or person acting for him, according to the legislation in force, with the declaration of conformity,
supplied with:
1) the use and maintenance manual of the appliance and of the system components (such as for example, the smoke ducts, chimney, etc.);
2) photocopy or photograph of the chimney plaque;
3) system booklet (where applicable).
The installer must ask to be issued with a receipt stating that the documentation has been provided, and must keep it with a copy of the technical
documentation relating to the installation.
For installation in a condominium, prior approval from the condominium's administrator must be requested.
Where required, check the exhaust gas emissions after installation. Should a sampling point be installed, it must be airtight.
COMPATIBILITY
Do not install in rooms with a re hazard. It is also forbidden to install it in living areas with the following characteristics:
1. where there are liquid fuel appliances with continuous or discontinuous operation that draw the combustion air into the room in which they
are installed.
2. wherethereare type Bgas appliancesintended forheating,with orwithout domestic hotwaterproductionand inadjacent andcommunicating
rooms.
3. where the depression measured in situ between the external and internal environment is greater than 4 Pa.
N.B.: Watertight appliances can also be installed in the cases indicated in points 1, 2 and 3 of this paragraph.
INSTALLATIONS IN BATHROOMS, BEDROOMS ANDSTUDIO FLATS
Installation in bathrooms, bedrooms and studio ats is only allowed for sealed or closed hearth appliances with ducted combustion air taken
from the outside.
oor protection
POSITIONING AND SAFETY DISTANCES
The support surfaces and/or points must have a suitable capacity to bear the overall weight
of the appliance, accessories and coverings. If the oor is made of a combustible material,
we recommend using a non-combustible material to protect the front part from any burnt
material which might fall during routine cleaning operations. The generator must be level
to function properly. The side walls, the rear walls and the oor support surface should be
made of non-combustible material.
One must also bear in mind all laws and national,
regional, provincial and town council regulations in force
in the country in which the appliance has been installed,
as well as the instructions contained in this manual.
Air inlet
Under any condition, including in the presence of extractor hoods and/or of controlled forced ventilation systems, the pressure dierence
between the generator installation rooms and the outside must always be equal to or less than 4 Pa.
MINIMUM DISTANCES (PELLET STOVES)
Installation next to ammable or heat-sensitive materials is permitted only if the special
safety distances specied on the label at the beginning of the manual (pag.2) are
observed. If the materials are not ammable, you must keep a side and rear distance of at
least 100 mm (without the inserts). For products equipped with rear spacers, wall-mounting
installation is permitted exclusively for the rear side.
PREPARATIONS FORMAINTENANCE
To carry out extraordinary maintenance operations on the product, it may be necessary to move it away from the adjacent walls. This must be
done by a technician authorised to disconnect the combustion product evacuation ducts and then reconnect them. For heaters connected to the
hydraulic system, the connection between the system itself and the product must be made in such a way that, when an authorised technician is
about to carry out extraordinary maintenance operations, it is possible to move the heater at least 1 metre away from the adjacent walls.

3 - 5%
Max 3 mt
8ENGLISH
EXAMPLES OF CORRECT CONNECTION TO THE CHIMNEY
In the presence of type B gas appliances with intermittent operation not intended for heating, they must have their own aeration and/or
ventilation opening.
The air inlets must meet the following requirements:
they must be protected with grids, metal mesh, etc., but without reducing the net useful section;
they must be made so as to make the maintenance operations possible;
positioned so that they cannot be obstructed;
The clean and non-contaminated air ow can also be obtained from a room adjacent to that of installation (indirect aeration and
ventilation), as long as the ow takes place freely through permanent openings communicating with the outside.
The adjacent room cannot be used as a garage, or to store combustible material or for any other activity with a re hazard, bathroom,
bedroom or common room of the building.
FLUE GAS EXHAUST
The heat generator works in depression and is equipped with an outlet fan for ue gas extraction. There must be a single exhaust system for
the generator. Using a ue that is shared with other devices is not allowed.
The components of the ue gas exhaust system must be chosen in relation to the type of appliance to be installed in compliance with:
UNI/ TS 11278 in the event of metal chimneys, with particular attention to that stated in the specication;
UNI EN 13063-1 and UNI EN 13063-2, UNI EN 1457, UNI EN 1806 in the event of non-metallic chimneys.
The length of the horizontal section must be minimal and, in any case, no longer than 3 metres, with a minimum upward slope of 3%
There must not be more than 4 direction changes including the one due to the use of the "T" element.
A“T” tting with a condensation collection cap must be provided at the base of the vertical section.
If the exhaust is not inserted in an existing ue, a vertical section with a windproof end piece is required (UNI 10683).
The vertical duct can be inside or outside the building. If the smoke duct is inserted in an existing ue, it must be certied for solid fuel.
If the smoke duct is outside the building, it must always be insulated.
The smoke ducts must have at least one airtight inlet for ue gas sampling.
All the sections of the ue gas duct must be accessible to inspection.
Inspection openings must be provided for cleaning.
If the generator has a fume temperature lower than 160°C+ ambient temperature caused by the high yield (contact technicians) it
MUST be resistant to humidity.
A ue system that does not respect the previous points or, in general, that does not comply with the regulations, may cause condensation
phenomena inside it.
CHIMNEY CAP
The chimney caps must meet the following requirements:
they must have a useful outlet section no less than double that of the chimney/ducted system on which it is installed;
they must be adapted in order to prevent the penetration of rain and snow in the chimney/ducted system;
they must be built so that, in the event of winds coming from all directions and from any angle, the expulsion of combustion products
is in any case ensured;
Protection from rain
and wind
Condensation-proof
"T" tting with
inspection plug
Insulated ue
Insulated "T"
tting with
inspection plug
Protection from rain and wind
"T" tting with
inspection
plug
CONNECTION TOTHE MAINS ELECTRIC SUPPLY
The generator is supplied with an electric power cable to be plugged into a 230V 50 Hz socket, possibly with a circuit breaker switch. The
socket must be easily accessible.
The electrical system must be compliant with standards. The eciency of the earthing circuit must be checked. Unsuitable earthing of the
system can cause malfunctioning for which the manufacturer will not be held liable.
Power supply variations beyond 10% can cause faulty operation of the product.
FOR GERMANY ONLY
The product can be connected to a shared ue (multi-connection) provided that the requirements of the regional and national regulations,
amongst which DIN EN 13384-2, DIN V 18160-1, DIN 18896 and of the MFeuV-2007 (Muster-Feuerungsverordnung) are strictly complied with,
and that the local chimney sweep has checked and approved the installation conditions.
Please also remember the following indications, which the end user must comply with:
 The device can be operated only with the doors closed.
 The doors and all setting devices must remain closed when the device is not on (except for cleaning and maintenance operations).

A
B C
DE
G
F-H
IKJ
9ENGLISH
DETAILS OFINSERTO COMFORT P70 AIR
AAmbient air outlet EPellet hopper ITA inlet
BAccess to combustion chamber
and ash drawer FFuse J230V power supply
CEmergency module GRail KCombustion air inlet
DFumes outlet HBulb thermostat rearm

A
B C
DE
I
G-H
MKJ
F
L
10 ENGLISH
COMFORT P70 AIR PLUS INSERT DETAILS
ARoom air outlet EPellet hopper J230V power supply
BAccess to combustion chamber
and ash drawer FAir ducting Z1 outlet KCombustion air inlet
CEmergency module G-HFuse
Bulb thermostat reactivation LDucting thermostat inlet Z1
DFlue gas outlet IRail MTA inlet

11ENGLISH
INSTALLATION INSERTO COMFORT P70 AIR -P70 AIR PLUS
MINIMUM CLEARANCE
20 20
660
540 10
700
With front loading kit H=625mm
For the insert to operate correctly, a minimum side and rear space
must be guaranteed, as shown in gure 2; the coatings must be
made of non-ammable material.
gure 1 gure 2
GENERAL
The insert is supplied with a sliding base in iron that allows it to be
installed in a pre-existing chimney.
This sliding base allows the insert to be removed easily to load the
pellets inside the hopper and for any maintenance or cleaning at the
end of the season.
If there is no pre-existing chimney, one can be built using an insert-
holder pedestal (optional kit). In fact, the latter xes the insert to the
ground.
ASSEMBLY: place the base in the chosen point and adjust the feet to
the desired height. Install a socket on the rear of the pedestal in a way
that the plug is accessible once installation has been performed. Fix
the pedestal to the oor using have-duty steel plugs with diameter
of 8mm. Take the sliding base and x it to the pedestal.
Please note: If our pedestal is used, a slot must be created in the ue
pipe to allow the pellet hopper level to be checked, thus avoiding
spillage when it is being topped up.
ASSEMBLY MUST BE CARRIED OUT BY QUALIFIED PERSONNEL!

12 ENGLISH
INSTALLATION
Open the door and release the latch using the poker supplied.
Remove the 6 screws and remove the ue pipe from the base.
Fix the base to the existing ue pipe.
ATTENTION! RESPECT THE 50MM HEIGHT FOR OPENING AND CLOSING THE INSERT CORRECTLY!
1
2
3a

13ENGLISH
Fix the base to the kit if it is a new installation (optional kit).
Block the rails with two screwdrivers and secure the ue pipe to the base with 6 screws.
Close the insert and block the latch.
3b
4
5

14 ENGLISH
FRESH AIR DUCTS
For correct operation, air must be allowed to recirculate inside the structure that covers the insert in order to prevent the appliance from
overheating.
To guarantee this, just realise one or more openings in the lower and upper part of the covering.
The following measurements must be respected:
LOWER PART (COLD AIR INLET)WITH TOTAL MINIMUM SURFACE 240 CM².
UPPER PART (HOT AIR OUTLET)WITH TOTAL MINIMUM SURFACE 240 CM².
The possible set-ups which must be respected are indicated below.
EXISTING INSTALLATION
FOR INSTALLATION ON AN EXISTING FLUE PIPE (EXAMPLES 2 AND 3), A HOLE
MUST BE MADE ONTHE SUPPORT BASE TO GUARANTEE THE CORRECT AIR FLOW.
EXAMPLE 1 EXAMPLE 2 EXAMPLE 3
A
A
B
B
B
B
A
A
C
D
A: Air convection outlet. Minimum section 120cm2.
B: air inlet from room. Minimum section 120cm2.
C: Air convection outlet.
Minimum section 240cm2.
D: air inlet from room.
Minimum section 240cm2.

15ENGLISH
NEW INSTALLATION
EXAMPLE 1 EXAMPLE 2
A
A
B
B
C
D
A: Air convection outlet. Minimum section 120cm2.
B: air inlet from room. Minimum section 120cm2.
C: Air convection outlet. Minimum section 240cm2.
D: air inlet from room. Minimum section 240cm2.
For the insert to operate correctly, a minimum side of 20 mm and rear space of 10 mm must be guaranteed; the coatings must be made
of non-ammable material.
IMPORTANT: ALL THE OPENINGS CREATED FOR THE CORRECT AIR CIRCULATION MUST PREVENT THE ENTRY OF
HAZARDOUS PARTS BY USING SPECIFIC GRILLES, BUT STILL GUARANTEEING THE MINIMUM AIR FLOW REQUIRED.
THE PIPE FOR FUMES OUTLET MUST ALWAYS MAINTAIN A MINIMUM DISTANCE OF 50 MM FROM INFLAMMABLE PARTS.
J
TO SAFEGUARD FROM ANY OVERHEATING, THE INSERT IS SUPPLIED WITH A PROBE THAT ANALYSES THE
TEMPERATURE INSIDE THE STRUCTURE
AND INTERVENES BY REDUCING THE FUNCTIONING POWER.

16 ENGLISH
SAFETY LATCH
Use the poker supplied to perform the release/block operation.
(Turn clockwise to release and anti-clockwise to block).
Holes present on two sides for the extraction of the insert via pokers.
Extraction of the insert allows both the pellets to be loaded inside the hopper and routine maintenance (cleaning the ash pipe at year
end) or unscheduled maintenance (replacement of mechanical parts if the product should break) to be performed.

17ENGLISH
EXTRACTION OF INSERT AND PELLET LOADING
Extraction of the insert allows both the pellets to be loaded inside the hopper and routine maintenance (cleaning the ash pipe at year end) or
unscheduled maintenance (replacement of mechanical parts if the product should break) to be performed.
To extract the insert, follow the procedure below:
Open the re door and turn the latch clockwise (using the poker supplied).
Turn the stove towards you using the pokers supplied until it blocks automatically.
THE INSERT MUST ONLY BE PULLED OUT WHEN THE STOVE IS SWITCHED OFF AND COMPLETELY COLD!
THE SURFACES MAY BE VERY HOT! ALWAYS USE SAFETY GLOVES!
THE USE OF POOR QUALITY PELLETS OR ANY OTHER MATERIALDAMAGES THE FUNCTIONS OF YOUR STOVE AND CAN
VOID THE WARRANTY AND THE RELEVANTRESPONSIBILITY OF THE MANUFACTURER.
TO GUARANTEE COMBUSTION WITHOUT PROBLEMS, THE PELLETS MUST BE KEPT IN A DRY PLACE.
PELLETS AND FEEDING
Pellets are made by subjecting wood shavings i.e. the rejects of pure wood (without paint) sawmill, carpenter products and products from
other activities connected to working and transforming wood, to very high pressures.
This type of fuel is fully ecological as no glues are used to hold it together. Indeed, the pellets remain compact over time due to a natural
substance found in wood: lignin.
As well as being an ecological fuel, as wood residues are made the most of, the pellet also has technical advantages.
While wood has a caloric value of 4.4 kWh/kg. (with 15% humidity, thus after 18 months of seasoning), the caloric value of the pellet is 5
kWh/kg.
Pellet density is about 650 kg/m3 and water content is equal to 8% of its weight. For this reason, the pellets do not need to be seasoned in
order to obtain a suciently adequate heat yield.
The pellets used must be class A1 certied according to standard ISO 17225-2 (ENplus-A1, DIN Plus or NF 444 of the following category:
“High quality NF biocombustible wood pellets”).
UNI EN 303-5 with the following characteristics: water content ≤12%, ash content ≤0.5% and lower caloric value >17 MJ/kg (in the case of
boilers).
The Manufacturer recommends using pellets with a diameter of 6mm with its products.
PELLET STORAGE
To guarantee combustion without problems, the pellets must be kept in a dry place.
Open the tank lid and load the pellets using a scoop.
DO NOT PLACE THE BAG DIRECTLY ONTHE STOVEWHEN LOADING THE HOPPER!
ALWAYS USE A SCOOPTO LOAD THE HOPPER.

18 ENGLISH
J
IN CASE OF INSTALLATION WITH LOADING KIT (OPTIONAL)THE MACHINE MUST NOT BE REMOVED.
DO NOT LOAD A GREATER NUMBER OF PELLETS THAN THE CAPACITY OFTHE HOPPER AND DO NOT DROP PELLETS
INSIDE THE PRODUCT.
Further information on accessories is available on the website under the category "accessories".
BULB THERMOSTAT REARM
The gure below shows the hopper rearm position. It is
recommended to contact the qualied technician if one of the
rearms should be triggered, so as to verify the cause.
FUSE
If the stove is not powered, it is recommended to have the fuse
checked by a qualied technician.
OPTIONAL LOADING ACCESSORIES
FRONT PELLET LOADING KIT
The optional pellet loading kit allows to load the pellets into the
hopper from the front without having to remove the insert (which
would require the machine to be switched o).
UPPER/SIDE PELLET LOADING KIT
The optional pellet loading kit allows to load the pellets into the
hopper without removing the insert from the installation opening
(which would require the machine to be switched o).
The kit can be assembled at a later time too.

19ENGLISH
ADDITIONAL THERMOSTAT TO CONTROL THE DUCT MOTOR
For models with duct motor, it is also possible to thermostat the motor itself. The connection to an external thermostat will allow for the
duct motor to be controlled regardless of stove operation.
At this point, simply set the desired temperature on the thermostat; the thermostat will command the operation of the second motor:
at the set temperature (contact closed), the air ducting motor will follow the stove settings.
when the temperature has been reached (contact open), the motor will switch to minimum.
The duct thermostat terminal features a standard bridge.
See the example image.
COMFORT P70 AIR PLUS HOT AIR DUCTING
The model is equipped with a ducting outlet. The pipe used for ducting the hot air must have an internal diameter of 80 mm and it must also
be insulated or at least be protected against heat dispersion.
THERELEVANTHOTAIRDUCTINGPIPEMUST BEINSTALLEDBYQUALIFIEDPERSONNEL AND/ORBYTHEMANUFACTURER’S
TECHNICIANS
AIR DUCTING FEATURES
Rear outlet Possibility to thermostat the ducting
Diameter of air ducting outlet: 80 mm 2 possible settings: COMFORT, AUTO.
Maximum recommended air ducting length 8 m

20 ENGLISH
WITH PROBE (NTC 10K)
Remove the jumper and connect the NTC probe in the room that needs to be temperature-controlled through air ducting.
2 control modes:
OPERATION IN AIR DUCTING WITH AMBIENT THERMOSTAT (OPTIONAL)
SET congured to AUTO
(The temperature setting is not visible)
Oncethe specicactivationthresholdhas been reachedand exceeded,at temperature
to be satised (CLOSED CONTACT) the air ducting motor will follow the stove settings.
When the temperature set on the thermostat is reached (OPEN CONTACT), the air
ducting motor will switch to minimum and then follow the stove settings again when
there is a new request.
SET congured to COMFORT
(The temperature setting is not visible)
Oncethe specicactivationthresholdhas been reachedand exceeded,at temperature
to be satised (CLOSED CONTACT) the air ducting motor will follow the stove settings
but at a lower speed than in SET AUTO for increased acoustic/ambient comfort.
When the temperature set on the thermostat is reached (OPEN CONTACT), the air
ducting motor will switch to minimum and then follow the stove settings again, but
at a lower speed when there is a new request.
OPERATION IN AIR DUCTING WITH NTC PROBE 10KΩ(OPTIONAL)
SET congured to AUTO
Set the desired temperature ( from 7 to 37 °C)
Oncethe specic activationthreshold has beenreached andexceeded,at temperature
to be satised the air ducting motor will follow the stove settings.
When the set TEMPERATUREis reached, the air ducting motor will switch to
minimum and then follow the stove settings again when there is a new request.
SET congured to COMFORT
Set the desired temperature ( from 7 to 37 °C)
Oncethe specic activationthreshold has beenreached andexceeded,at temperature
to be satised the air ducting motor will follow the stove settings but at a lower speed
than in SET AUTO for increased acoustic/ambient comfort.
When the set TEMPERATUREis reached, the air ducting motor will switch to
minimum and then follow the stove settings again, but at a lower speed when there
is a new request.
OPERATION IN AIR DUCTINGWITH THERMOSTAT OR PROBE (OPTIONAL)
The stove is tted with an independent motor for ducting. The connection of an external thermostat or temperature probe (NTC 10K) in the
input, located in the rear part of the stove, makes it possible to control the air ducting motor independently of the stove.
Suce it to connect the thermostat/temperature probe and set the desired temperature.
For information on air ducting settings see chapter:" MENU -R AIRDUCTING"
WITH AMBIENT THERMOSTAT (OPTIONAL)
Remove the jumper and connect the ambient thermostat in the room that needs to be temperature-controlled through air ducting 1.
2 control modes: