Sunwayi DZ43 User manual

DZ43
Digital Wireless Camera System
1

1 2
2. Monitor
Power Cable
Socket
Dashboard Mount
ADD
MENU/OK
DEC
Light Sensor
IR bulbs’
Antenna
Bracket
3. Additional Monitor
Mounts (included)
Vent Screw
4. Cigarette Lighter
Power Adapter
5. User Manual
6. Install Screws 7. Screwdriver (For Monitor Holder
& Vent Screw )
Cable
DZ43 is a Digital Wireless Camera System that can display the
view behind a vehicle/trailer etc. It can also be utilised to view
the inside of a trailer etc. Of course, it can be installed on the
vehicle side or other place for other purpose.
Thanks for your purchasing DZ43 Digital Wireless Camera
System.
Please read this User Manual before using/installing it.
DZ43 utilses 2.4Ghz digital wireless transmission, is powered
by the vehicle/trailer and therefore does not require a cable
between the camera and monitor (ideal for trailer applications).
4.3” Screen
COMPONENTS
01.
9
10
Specification
6
Camera Installation 3
9
Monitor Installation
03 4
07
Buttons & Settings
Disclaimer
Warranty Info
1. Camera
Windscreen
Mount
Air Vent
Mount
Notice:
The system and User Manual may be updated at any time.
Manufacturer reserves the right to modify and update the system
specifications/functionality without prior notice.

34
CAMERA INSTALLATION
Power Negative
Power Positive “+”
1. Use the supplied screws to fix the camera to the vehicle.
2. Connect the camera power cable to the vehicle power system (lights etc).
90°
90°
Before rotating the camera, loosen the fixing screw on the
side of the camera, hold the camera with one hand, rotate
it up or down, and tighten the screw after reaching the
best angle.
Light Sensor
IR
‘Light’
The light sensor underneath the camera lens
detects light changes and will automatically
turn on the IR ‘Lights’ at night, or in low light
conditions, so that the image is clearer
(B&W image).
IR ‘Lights’ (Night Vision)
Plug & Play
Notice:
3. Connect the power cable to the monitor & insert the
cigarette lighter power adapter into the vehicle’s
adapter’s socket. Switch the monitor on and then
adjust the camera angle to the ideal viewing position,
then fix it by tightening the bracket screws.
Cigarette lighter slot in car
1) The dashboard mount is already attached
to the monitor and can be stuck to the dash
board. Choose and clean a suitable location
on the dashboard, remove the paper from the
monitor stand sticky pad and firmly press the
stand mount onto the dashboard.
2) If using the windscreen mount, please
replace the dashboard mount by utilising
the supplied screwdriver.
1. The monitor can be fixed to the dashboard, windscreen,
or air-vent.
2. How to install the mounts:
Used for reversing assistance For in-vehicle monitoring
03. MONITOR INSTALLATION
Dashboard Mount Air Vent Mount Windscreen Mount

Choose a suitable place on the windscreen and mount the suction cup ;
with the suction lever in the released position,
press the suction cup against the windscreen.
Press the suction lever toward the suction cup
to lock the mount. To adjust the angle of the
monitor, loosen the collar on the ball joint &
retighten in the desired position.
3. Connect the monitor to vehicle power via the cigarette lighter
power adapter.
56
NB. Please use mirror image (default view) for reversing and rear view
applications.
When the monitor is displaying the camera image short press [MENU/OK]
to enter the main menu interface, select the "Image Mirror" icon and long
press [MENU/OK], to set 'upwards' or 'downwards' image. After setting,
short press twice to exit the setting.
04.
3) If utilising the air-vent mount, please remove the dashboard mount and
complete the following instructions:
Make sure that the cross of the
base lines up with the cross on
the rear of the monitor
Press the vent mount ball
firmly into the threaded base
Rotate the nut and tighten
clockwise
Move the lever up/down to clamp
to the vent
Rotating the image and switching between 'normal' and
mirror imageview:
Select the "Image Mirror" icon and long press the middle button [MENU/OK]
to enter the mirror setting interface, short press [ADD] or [DEC] button to
set mirror or normal image. After setting short press [MENU/OK] twice to
save and exit.

7 8
Short Press DOWN button [DEC] to switch between the Parking Guide
Lines display modes (Displayed or Not Displayed):
Parking guidelines display or no display:
While the monitor is showing the image, short press the middle button
[MENU/OK] to enter the main menu interface, and 5 options are available
(Pairing, Image Parameters, Image Mirror, Parking Guideline Position
Adjustment, Software Information).
Pairing Image
Paramete
Image
Mirror
Software
Information
Parking Guideline
Position Adjustment
Meaning
Operating
Pairing Image
Paramete
Image
Mirror
Parking Guideline
Position Adjustment
Software
Information
Default setting,
no need to
operate again.
To adjust Brightness
Contrast, Color.
Operation details
as Image Parameter
info.
Set Upwards/Downwards
or Normal/Mirror Image.
Operation details as
Image Mirror contents.
Select “Software Info”,
press [ADD] or [DEC]
key to display software
version information.
The parking guideline can
be adjusted up and down
as needed. Operation details
as Parking Guideline Position
Adjust info.
5 levels of adjustment
For detailed operation methods,
please refer to page P8.
The parking guideline position can be adjusted
up or down, to mark the image area more realistically.
There are 5 levels to choose from.
Parking Guideline Position Adjustment
Select the “Parking Guide Position Adjustment” icon, then long press the middle
button [MENU / OK] to enter the setting interface, short press the [ADD] or [DEC]
button to choose the most suitable one from 5 levels, then short press [MENU / OK]
twice to exit.
3. Parking Guideline Position Adjustment
A B C D E
While the monitor is showing the image, short press the middle button
[MENU/OK] to enter the main menu interface. From the 3 options.
Select Image Parameter, long press the [MENU/OK] button again,
3 Images(Brightness/ Contrast/ Color) setting interface are shown bellow:
Select the Brightness icon, press
[ADD] or [DEC] button to adjust the
brightness as shown bellow:
Select the Contract icon, press
[ADD] or [DEC] button to adjust the
contract as shown bellow:
Select the Colour icon, press
[ADD] or [DEC] button to adjust
the colour as shown bellow:
Brightness Contrast Color
2. Image Parameter
Brightness Setting
Contrast Setting
Colour Setting

05.
9 10
Input Power Voltage: DC 9V-30V
Input Power Voltage (Cigarette lighter): DC 9V-30V
06. DISCLAIMER
Dz43 Digital Wireless Camera system is intended to assist the driver, but
it doesn't relieve the driver from full responsibility for operation of the vehicle. It
is the driver's sole responsibility to drive safely, legally and responsibly. By
installing and/or using DZ43 Digital Wireless Camera system, you agree
that you are solely responsible for the operation of your vehicle, the system
Supplier is not responsible for any property damage, personal injury, or loss of
life that may result from the operation of your vehicle.
Supperlier warranty that your NEW Product is free of defects of workmanship
and materials. If there is a defect or malfunction of this product, Supperlier will
repair it free of charge as follows:
PARTS: New or comparable rebuilt parts in exchange for defective parts for
ONE YEAR from date of customer purchase.
BE SURE TO KEEP A COPY OF YOUR SALES RECEIPT!
STANDARD WARRANTY
WARRANTY:
LABOR: Supperlier provides labor warranty for (90) ninty days from date of
end-user purchase. At completion of the repair, the consumer will be
responsible for the cost for any parts or services no longer covered
under the warranty.
07. WARRANTY INFO
This warranty does not apply to persons who purchased this product
second-hand or used.
This warranty does not include adjustments, parts and/or repairs required by
circumstances beyond the control of Supperlier, including but not limited to
fire or other casualty, accident, neglect, abuse, misuse, abnormal use or
battery leakage damages.
THERE ARE NO OTHER EXPRESSED WARRANTIES EXCEPT AS STATED
HEREIN. AFTER THE PERIOD OF EXPRESSED WARRANTY SET FORTH
HEREIN, THERE ARE NO EXPRESSED OR IMPLIED WARRANTIES AND
THOSE EXCLUDED INCLUDE THOSE OF MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE. Supperlier shall NOT be held
liable for any CONSEQUENTIAL DAMAGES resulting from any failure,
defect or malfunction of this product. Some Regions do not allow limitations
on how long an implied warranty lasts and some Regions do not allow the
exclusion or limitation of incidental or consequential damages, so the above
limitations may not apply to you.
Ef fective Transmission Distance: Up to 30m (line of sight)