
7
BATTERY INFORMATION & WARNINGS
Before replacing batteries, read the enclosed BATTERY INFORMATION/WARNING
insert in your original packaging. For additional battery safety, handling, and product
information, visit www.surefire.com/batteries.
HEADSTRAP ACCESSORY
The SureFire 2211 Headstrap adds to the versatility of any 2211® WristLight by allowing
you to quickly convert the WristLight into a headlamp. Simply buckle the 2211 WristLight
into the headstrap and then adjust the strap to comfortably and snugly fit your head (one
size fits all) for instant hands-free illumination. For a complete listing of accessories, visit
www.surefire.com/partsaccessories.
PROGRAMMING 2211’s ACTIVATION SEQUENCE
The 2211’s default activation sequence goes from low to medium to high output and
then off; however, it can also be programmed by the user to reverse this sequence—
high-med-low-off—to accommodate personal preference. The 2211 must be plugged
into its charger to program the activation sequence. Once programmed and
removed from its charger, the activation sequence will not change unless the 2211
is reprogrammed to its default sequence.
To reverse the 2211’s default activation sequence
1. Plug the 2211 into its charger
2. Press and release the pushbutton three times until high output is activated
3. Wait 5 or more seconds, then press pushbutton once more, turning the 2211 off
4. Remove the 2211 from its charger and test activation sequence— it will
now be high-med-low-off
To restore the 2211’s activation sequence to its default setting (low-med-high-off),
repeat the above procedure with the following exception in Step #2: Press and release
pushbutton three times until LOW output is activated.