Superfire G2ZX COMBATLIGHT User manual

SINGLE-OUTPUT LED FLASHLIGHT
G2ZX-C-BK
USER MANUAL
BODY
LED
ASSEMBLY
TAILCAP
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly. SureFire
warrants that if you — our customer — purchase one of our products, and we
determine that it is defective in material and/or workmanship during your lifetime, we
will repair or replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear — things like
batteries draining, headbands and headpads wearing out, ink cartridges running
out, and switches wearing out — or damage resulting from abuse, alterations,
unauthorized repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the right to replace an
obsolete product with a current production, like model. In the event that any issue with
a SureFire product is not covered under this warranty SureFire can arrange to have
the product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express or implied
conditions and warranties, including, without limitation, any implied warranty or
condition of merchantability or fitness for a particular purpose, or accuracy of any
informational content, are hereby excluded and disclaimed by SureFire; and in no
event will SureFire be liable for any special, direct, indirect, consequential, incidental
or punitive damages howsoever arising and regardless of the theory of liability, even if
advised of the possibility of such damages. Products, prices, availability, specifications,
and offers are subject to change or cancellation at any time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a Return
Merchandise Authorization number (RMA#). Then package the unit carefully
and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
SUREFIRE.COM
Patents: RE40125, 5642932
Revision B 10-2020
71-01-1048
G2ZX-C-BK
G2ZX-C-BK
OUTPUT 600 lumens
RUNTIME 1.5 hours
PEAK BEAM INTENSITY 8,700 candela
BEAM DISTANCE 187 meters
WEIGHT (w/batteries) 4.3 oz (121 g)
LENGTH 5.2 in (13.2 cm)
BEZEL DIAMETER 1.25 in (3.175 cm)
All performance claims tested to ANSI/NEMA FL1-2019 Standard.
SPECIFICATIONS

LOCKOUT TAILCAP
Most SureFire illumination tools feature a lockout tailcap, which pre-
vents accidental activation during storage or transport. The tailcap
may need to be enabled prior to light operation.
To enable, rotate tailcap clockwise until light activates when tailcap
pushbutton is pressed, providing momentary-on light output.
To lock out tailcap, rotate counterclockwise until light will not
activate when pressed.
LIGHT OPERATION
For momentary-on activation, depress tailcap pushbutton. To deacti-
vate, release pushbutton. For constant-on activation, twist tailcap
clockwise until light stays on. To deactivate, turn counterclockwise
until light goes off.
BATTERY INSTALLATION / REPLACEMENT
The G2ZX ships with two preloaded batteries. To load or
replace batteries:
1. Unscrew tailcap counterclockwise and remove.
2. Remove old batteries and dispose of properly.
3.Insertnew123Alithium batteries withpositive (+) terminals oriented
forward.
4. Replace tailcap by screwing on clockwise. Press pushbutton (with
tailcap enabled) to test.
Note: Never mix old and new batteries; always replace all batteries at same time.
LANYARD INSTALLATION
Squeeze lanyard’s wire clip to separate its two U-shaped ends.
Thread one of these U-shaped ends through the loop of the flash-
light’s lanyard ring and continue to slide through until both ends of
the clip can be snapped back together, securing the flashlight to the
lanyard. Adjust cord locks as desired.
MAINTENANCE
Use a clean, dry cloth to wipe off body and window. Periodically clean
and lubricate threads and O-rings using a thin coat of non-migrating,
silicone-based lubricants. Avoid using petroleum-based lubricants that
can damage O-rings. For additional tips on maintaining your SureFire
illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination tools.
For a complete listing, visit www.surefire.com/partsaccessories.
ENABLE
DISABLE
PRESS OR
TWIST TO
ACTIVATE