Superfire VAMPIRE V1-B User manual

V1-B VAMPIRE
®
WHITE-LIGHT/INFRARED (IR) DUAL-OUTPUT LED
V1-B-BK
BODY
LED
ASSEMBLY
TAILCAP
USER MANUAL
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
WWW.SUREFIRE.COM
Patents: RE40125, 8,182,109
Revision F 10-2020
71-01-943
V1-B-BK
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly. SureFire warrants that if you — our
customer — purchase one of our products, and we determine that it is defective in material and/or workmanship
during your lifetime, we will repair or replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear — things like batteries draining, headbands
and headpads wearing out, ink cartridges running out, and switches wearing out — or damage resulting from
abuse, alterations, unauthorized repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the right to replace an obsolete product with a current
production, like model. In the event that any issue with a SureFire product is not covered under this warranty
SureFire can arrange to have the product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express or implied conditions and warranties,
including, without limitation, any implied warranty or condition of merchantability or fitness for a particular
purpose, or accuracy of any informational content, are hereby excluded and disclaimed by SureFire; and in
no event will SureFire be liable for any special, direct, indirect, consequential, incidental or punitive damages
howsoever arising and regardless of the theory of liability, even if advised of the possibility of such damages.
Products, prices, availability, specifications, and offers are subject to change or cancellation at any time without
notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a Return Merchandise Authorization number
(RMA#). Then package the unit carefully and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
V1-B
OUTPUT (white light)
(IR)
250 lumens (high) 5 lumens (low)
100 mW (high) 5 mW (low)
INTENSITY (white light) 9,300 candela
RUNTIME* (white light)
(IR)
1.5 hrs (high) 6 hrs (low)
20.5 hrs (high) 57 hrs (low)
WEIGHT 3.1 oz (88 g)
LENGTH 4.18 in (10.6cm)
BEZEL DIAMETER 1.06 in (2.7cm)
All performance claims tested to ANSI/NEMA FL1-2009 Standard.
SPECIFICATIONS

INTRODUCTION
The ultra-compact, dual-output, dual-spectrum V1 Vampire allows selection between white light and infrared illumination,
generated by a single all-LED head, with no IR filter required. A self-locking bezel selector ring sets the spectrum, white
light or IR, and the light is activated by pressing or clicking the tailcap switch. The V1 Vampire runs on a single 123A
lithium battery and is constructed of aerospace aluminum that’s Mil-Spec hard anodized for extreme durability.
LOCKOUT TAILCAP
The V1 Vampire features a lockout tailcap, which prevents accidental activation during storage or transport. The tailcap
may need to be enabled prior to light operation.
To enable, rotate tailcap clockwise until light activates when tailcap pushbutton is pressed, providing momentary-on light
output.
To lock out tailcap, rotate counterclockwise until light will not activate when pressed.
LIGHT OPERATION
NOTE: Unit is shipped in the “OFF” position to prevent activation of the light.
1. To select white (WH) light LED, rotate knurled portion of the bezel clockwise (with bezel pointed away from you)
until indicator dot aligns with WH and the head clicks in to position (Fig. 1).
2. To select IR LED, rotate knurled portion of the bezel counter clockwise (with bezel pointed away from you)
until indicator dot aligns with IR and the head clicks in to position (Fig. 2).
V1-B VAMPIRE
®
LIGHT ACTIVATION
Press or click pushbutton tailcap switch once for high output. Return to off and press or click on again, within two seconds,
for low output.
BATTERY REPLACEMENT
Most SureFire illumination tools ship preloaded with batteries. To load or replace batteries:
1. Unscrew head and remove.
2. Remove old batteries and dispose of properly.
3. Insert new battery with positive (+) terminals oriented forward.
4. Replace head and screw on until hand tight.
MAINTENANCE
Use a clean, dry cloth to wipe off body and window. Periodically clean and lubricate threads. Apply a thin coat of non-migrating,
silicon-based lubricant to O-rings (do not use petroleum-based lubricants which can harm O-rings). For additional tips on
maintaining your SureFire illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination tools. For a complete listing,
visit www.surefire.com/partsaccessories.
ENABLE
DISABLE
FIGURE 2
FIGURE 1