Svantek SV 106 User manual

SV106 HVM Analyser
1. Settings for hand-arm
2. Saving setup
3. Start-up menu

Turn on the instrument and select
Factory settings

Instrument reads the TEDS me-
mory from SV105. Select Use
TEDS and conrm by Enter.

Press Shift+Enter to access the
main menu.

Select Measurement and press
Enter

Enter General Settings

Use Left Arrow to Change Me-
asure Period to Innity

Use Right Arrow and set Repe-
tition Number to 1.

Disable Logging mode (Time Hi-
story). Conrm by Enter.

Enter Channels Setup

Using Arrows select Channels
1-3. Conrm by Enter.

Enter Dosimeter settings.

Make sure HAV is selected.
Conrm by Enter.

Using Escape go back to main
menu.

Select File and press Enter.

Enter File Manager.

Press Left Arrow to move up in
folders structure.

Select New Directory and press
Enter.

Using arrows set the directory
name. Press Enter when ready.

Select new directory and press
Enter.